commit d00db554 introduce ethaddr_param. But it is not initialized, so
devinfo fails to show the mac. Remove it and use edev->ethaddr.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
register_preset_mac_address only works when CONFIG_PARAMETER
is enabled because otherwise dev_set_param is a no-op. Add a
function to set the MAC address explicitly without the need
of CONFIG_PARAMETER and use it where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.
Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for nfs3 support as some types became bigger compared to
nfs2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On some architectures (e.g. alpha, amd64, arm64, ia64, s390x, mips64)
sizeof(ulong) is 8 which made net_read_uint32 actually read too much and
even returned the wrong value on big endian machines.
(Note the second issue isn't that critical though, because the only
architecture from the list above that uses big endian byte order is s390x
...)
Also change the argument to void * because the pointer is not necessarily
properly aligned.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux normally has no idea how to retrieve MAC Addresses, but instead
expects the MAC address in the devicetree. This patch adds the MAC
address to the devicetree for Linux if we find a valid one in barebox.
This mechanism is limited of course to devices barebox has a driver for
and which are probed themselves from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have a possibility to register a MAC address provider
based on a ethernet device id. This adds a similar functionality
for devices probed from devicetree. Code can register itself to
be a MAC address provider for a certain devicetree node.
This helps on i.MX to let the IIM unit provide a MAC address for
the FEC.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rather than storing the parameters globally and trying to keep them
in sync with the device parameters, store the parameters in the ethernet
device directly. Also, update to dev_add_param_ip().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Reduce confusion by making clear six bytes are passed,
not a string.
Signed-off-by: Johannes Stezenbach <js@sig21.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce getenv_ip_dns to be able to do not do the resolv when using it in
resolv for the nameserver (Do not loop).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
MAC addresses are sometimes stored at unusual places. This
patch makes it possible to give a MAC address to a ethernet
device id. This is independent of the device actually being
present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is not yet used, but with this the different network
commands can get rid of their global data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change device parameters so that the memory management is in generic
code. This also removes the need of storing statically initialized
parameters as they are stored in a struct list_head for each device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old network stack has some bad limitations:
- network commands are required to call NetLoop() which only returns when
the network layer wants to. Instead we now use a net_poll() function which
returns after handling one packet (or immediately if no packet is
available).
- There can be only one packet handler which makes it impossible to handle
multiple connections
- CamelCaseMakesItHardToRead
The new network stack is implemented as a parallel universe. Currently all
commands still use the old stack. They are converted in subsequent patches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to eth_open/eth_halt the network devices during NetLoopInit
which is called whenever the user enters a network command.
Change this behaviour so that the current network device gets opened
when making it the current one.
With this change it's always possible to send packages and we are able
to implement a new network stack in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of having a big switch/case for every protocol, do
the right things in the individual functions before callong
NetLoop().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>