with:
- led
- USB Device
- uart
- net
- mmc
- MMU
dfu support
detect it at boot time
if the user button is pressed 5s and the vbus is 1 start the dfu
otherwise the vbus is 1 start usb serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, both SDHC clock source is PLL3. We can raise clock
for SDHC driver by change source from PLL3 to PLL2.
Below, is debug ouputs with old and new settings.
Detection (PLL3):
set clock: wanted: 400000 got: 375000
Operation (PLL3):
set clock: wanted: 25000000 got: 18000000
Operation SD4.0 (PLL3):
set clock: wanted: 52000000 got: 27000000
Detection (PLL2):
set clock: wanted: 400000 got: 399639
Operation (PLL2):
set clock: wanted: 25000000 got: 23750000
Operation SD4.0 (PLL2):
set clock: wanted: 52000000 got: 41562500
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fixes
arch/arm/mach-samsung/Kconfig:95:warning: config symbol defined without type
Until we actually have board support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to set the name in struct usb_driver, not the one
in struct driver_d which gets overwritten with usb_driver->name
during registration.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Traditionally we call __mmu_cache_flush in early startup. There
is a problem with armv7 and hierarchical caches though, on these
systems __mmu_cache_flush uses the stack. Appearantly this was
seldomly a problem, because most of these systems have a ROM
bootloader which sets up some stack, but on a special i.MX6 system
this failed badly. We should not have to flush caches here. Every
sane system should pass control to the bootloader without stale
entries in the caches *), so it should be a safe assumption that the
cache flush can be removed.
Since __mmu_cache_flush is not called from early code anymore we can
also move it to the regular text section.
Be brave and give it a try.
*) omap3 seems to be a exception to this, but this has a cache flush
in arch_init_lowlevel already
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added support for CompactFlash cards for PCM970 development board via
PCMCIA window.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
parse_stream_outer used to convert a exit value to a return code,
but parse_stream_outer maybe inside a recursion. This means that
the exit status is lost in this case. Test case:
if [ 0 = 0 ]; then
false
exit $?
fi
echo "shouldn't be here"
Without this patch "shouldn't be here" will be printed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The path to the sandbox environment is now arch/sandbox/board/env .
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
print_menu_entry() in common/menu.c depeneds on process_escape_sequence().
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register GPIO7 as heartbeat LED, same as in the linux kernel.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add i2c-omap and twlcore driver to panda board.
(Based on similar patch for pcm049).
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If barebox is not used as the MLO, then it crashes during boot
with the below error message:
Board: Texas Instrument's Panda
PandaBoard Revision: 003
omap-hsmmc@mci0: registered as mci0
unable to handle paging request at address 0x4a064010
pc : [<8f01e820>] lr : [<8f0049a0>]
sp : 8cffff80 ip : 00000016 fp : 00100103
r10: 00000000 r9 : 00000ae7 r8 : 4030b76c
r7 : 40300200 r6 : e28f8028 r5 : 0000003e r4 : 00000000
r3 : 4a064000 r2 : 00000014 r1 : 00000001 r0 : 00000001
Flags: nzCv IRQs off FIQs off Mode SVC_32
[<8f01e820>] (panda_devices_init+0x17c/0x1e0) from [<8f006300>] (start_barebox+0x18/0x10c)
[<8f006300>] (start_barebox+0x18/0x10c) from [<8200006c>] (0x8200006c)
[<8f021248>] (unwind_backtrace+0x0/0x98) from [<8f011a00>] (panic+0x28/0x3c)
[<8f011a00>] (panic+0x28/0x3c) from [<8f02171c>] (do_exception+0x10/0x14)
[<8f02171c>] (do_exception+0x10/0x14) from [<8f021784>] (do_data_abort+0x2c/0x38)
[<8f021784>] (do_data_abort+0x2c/0x38) from [<8f021470>] (data_abort+0x50/0x60)
This is because the USBHOST module is not enabled. The module enable
is is normally done in mach-omap/xload.c which never gets called.
Since we're configuring the USBHOST CLKCTRL register in the board file
anyway, we might as well explicitly enable the module in the same place.
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can start a new interactive shell now using the 'sh' command on
the command line. This shell exits on ctrl-c though. Add a loop
around it to continue instead of exiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the pcm038 board to the new environment template and
does the necessary defaultconfig adjustments. Additionally it disables
UBI support as the pcm038 image is getting bigger and bigger and UBI
seems to be the most unused big (in size) feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a new environment template which aims to be more flexible
and configurable. Instead of having mainly two scripts (a config script
and a boot script) this template uses initscripts which control the
startup behaviour and configuration. Also we have boot scripts in
/env/boot which configure a single boot configuration. Additional
boot entries can be added by board specific entries or during runtime
by copying and editing a template entry.
Some more helpers handle for example network interfaces which can now
be brought up with 'ifup'. We use the automount feature to configure
mountpoints together with the commands to bring up the devices behind
these mountpoints.
Optionally menu support is available which hides many details behind
a nice looking interface.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It turns out useful to be able to configure bootm before its usage.
This allows us to overwrite bootm settings on an individual base.
This patch adds global variables to configure the kernel image, the
initrd image and the devicetree image. These values will be used
unless overwritten explicitely with command line switches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch also cleans the source by putting in device_init
the code which is actually in console_init and has nothing
to see with the console.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
else USB device doesn't work as the hardware fix is present on the
boards
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch making errno a positive value has another bug:
lseek was switched to return -errno instead of -1. This does not
work since we can lseek we can address the whole 4G address space,
have of which has a negative offset when interpreted as a signed
integer. Let lseek return -1 on failure again instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and Makefile allow to include the 85xx cpu support in the
compilation process.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
_text_base assignment has been removed earlier from lib/board.c
for the mpc5xxx.
For the 85xx, _text_base is set to where the firmware relocates
in memory as passed by the function input variable.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds initialization functions used by the e500v2 start-up code
and board specific code (L2 cache initialization).
Other functions help identify the CPU or return the programmed memory size.
Finally, the Makefile and Kconfig file are added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch contains functions that returns information on
the CPU and buses frequency (LBC, DDR, system).
It also includes the clock source driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan
Sascha Hauer
Antony Pavlov
Alan Ott
Alexey Galakhov
Anand Gadiyar
Eric Bénard
Renaud Barbier