Add and use meaningful macro names for OMAP4 GPIO addresses, and add a
comment to explain the 0x100 offset for OMAP4.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In addition, collapse adjacent comment blocks into one and remove
extraneous blank lines.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Acked-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
putc already is a regular barebox function. To avoid conflicts and
confusions just let architectures define PUTC_LL directly instead
of going through this addiotional redirection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
structure is used within barebox only and there is no need to pack it.
As this option has a negative performance impact, remove it.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add functions to read the barebox_arm_head, check barebox magicword
and read out the barebox image size.
Create a inital partion of 1Mb to access the barebox image on nand.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change clock init to allow early gpio access. Add support for 4460 clocks.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
based on: [U-Boot] [PATCH v 4/5] omap4: support TPS programming
TPS62361 is the new power supply used in OMAP4460 that
supplies vdd_mpu.
VCORE1 from Phoenix supplies vdd_core and VCORE2 supplies
vdd_iva. VCORE3 is not used in OMAP4460.
Signed-off-by: F. Gasnier fabrice.gasnier@cenosys.com
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the prefetch engine to improve NAND performance. The howto
is derived from the Kernel. Unlike the kernel we do not make
the access mode configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing several options into the nand register function
it is much more straight forward to just pass the platformdata.
While at it, rename the function to omap_add_gpmc_nand_device to
better describe what it does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- dev_ready is supposed to return whether the device is ready or
not, not to poll until the device is ready.
- dev_ready should return true for ready and false for not ready
- waitpin polarity is not needed (at least the kernel does not have it)
- wait_mon_mask must be 32bit.
The code was unused since no board specified a wait pin, so no breakage
included. This also removes the now unused timeout variable from
platformdata.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without yet adding in the underlying code, extend the revision
checking code to return additional values for PandaBoard ES boards.
Much of the code was taken close to verbatim from U-Boot.
compile tested, and confirmed that this code behaves identically to
the original panda configure and build for the three pandas i have:
* Rev A2 (boots)
* Rev EA3 (boots)
* Rev B1 ES (no output)
so while there's still work to be done, this at least represents the
necessary infrastructure to start *recognizing* panda ES boards.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a OMAP4 specific GMPC nand config for pcm049 and phyCARD-A-XL2 to increase
performance. Also add the possiblility to pass a board GPMC nand config.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no need to call a_init before relocation, so rename
the function to omap3_core_init and call it from board code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
board_init initializes the mux and sdram. For both there is no
need to configure this so early. Move the code to a pure_initcall
and remove the surrounding unneeded code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
this will allow to switch omap3 to standard organisation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support the setup of the mmc voltage, when booting OMAP4 with twl6030
from nand.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This helper function can be used for automatic
SDDR configuration based on register settings
made by a previously first stage bootloader
i.e. x-loader.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add platform data to specify maximum frequency of hsmmc interface
which can be restricted due to external level shifters.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use generic read/write depending on the memory size
if no reg_read/write defined
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add some common xload helper functions to determine the boot source
on omap3/4 and to load images from mmc and nand.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>