The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our devicetree printing is close to correct dts syntax, so fix
some remaining differences:
- Use an equal sign instead of a colon to separate a poperty name and
a value
- Add a semicolon at the end of properties
- Make sure we do not print a separator for empty properties
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
eth_of_fixup() is passed a devicetree, so use this one instead
of the internal devicetree. This makes sure it also works when
the tree to fixup is not the internal one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_print_cmdline() is passed a devicetree, so use this one instead
of the internal devicetree. This fixes the cmdline printout when
bootm on ARM is used with an external devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The level of pr_err and pr_warning were interchanged.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When changing the rates of the ssp clocks we have to poll the
busy bit, but only when they are enabled. The current code can
not check this properly since the gates are registered as children
of the dividers. This has the effect that when the gate is disabled
the busy bit will be set forever resulting in a freezed system.
Fix this by making the gates parents of the dividers which allows
clk_is_enabled to return the correct result.
The Kernel has the same problem, but here the busy polling is
limited to 10ms, so probably noone noticed this.
The datasheet mentions that the ssp dividers shall only be changed
when the clocks are enabled. The kernel and barebox currently ignore
this. I don't know what effect violating this rule has.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The compiled in dcd images generate an intermediate assembly file. Instead
of generating them as *.S generate them as *.dcd.S to better identify them
as generated files. These are then added to .gitignore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way to boot tiny210 was to restart barebox after loading stage2 image.
This turned out to be unstable and stopped working after barebox refactoring.
Now jump to the same position in the loaded code instead of starting it from
the very beginning.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reverts commit 08c0e206b3.
The external NAND boot code currently uses the _text linker variable
to determine a place for the image. This doesn't work with multi image
support which will link the binary at 0x0. Revert multi image support
for the pcm038 for now until a solution is found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We just keep one on rm9200ek as I did not yet convert this SoC init to C
struct and still use Macro.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to drop the config.h and switch to multi board support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we now use a UBI Volume instead of user_block, kernel and root
the bootloader size is 320KiB not 256KiB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initialization of from device node with root_node if NULL
is passed. This corresponds to the behavior of all other node iterators.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_get_next_available_child does not iterate but always tries the
same node over and over again. This first prepares the entry and
then uses list_for_each_entry_continue, instead of for_each_child_of_node
before.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_find_node_by_name suffers from infinite looping, because it
does not check for root node of the tree iterated over. This
fixes this by checking for node->parent to determine whether
the last node has been reached.
Since of_tree_for_each_node does not iterate over the whole tree,
but only over the remaining nodes, rename it to
of_tree_for_each_node_from.
Reported-by: NISHIMOTO Hiroki <hiroki.nishimoto.if@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For splashscreen support on pcm049, this patch adds omap4 framebuffer
platform data and configures display pd050vl1, g104x1, pm070wl4, pd104slf,
edt_etm0350G0dh6, edt_etm0430G0dh6, edt_etmv570G2dhu and edt_etm0700G0dh6
Also add extra muxing and defconfig
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only UART clocks are included for now, but the code should cover
other peripherals needs, too.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the existing Tegra CAR driver and replaces it with code
ported from the Linux clock framework.
In the current state only the relevant PLLs are supported, but this is
no functional regression from the existing code.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to properly bring up the system PLLs we need a reliable
clocksource. To break the circular dependency between the clocksource
and the CAR driver, get the OSC frequency with a lowlevel function.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a nearly full-blown config for the v7 i.MX (i.MX51, i.MX53 and
i.MX6).
currently the following images are built:
barebox-imx51-babbage.img
barebox-imx53-loco.img
barebox-imx6-realq7.img
barebox-genesi-efikasb.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is necessary because the C name for the flash header matches
the filename. For multiple board support we have to make the name
unique to prevent linker errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Hubert Feurstein
Renaud Barbier
Alexander Shiyan
Alexey Galakhov
Jan Luebbe
Jean-Christophe PLAGNIOL-VILLARD
Sebastian Hesselbarth
Philipp Zabel
Christoph Fritz
Lucas Stach