as barebox can be run as a second stage the first stage may have init it
before so re-used it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch (against next) I get this:
rsc@thebe:barebox$ make ARCH=arm CROSS_COMPILE=<path>/arm-v5te-linux-gnueabi- menuconfig
HOSTCC scripts/kconfig/lxdialog/checklist.o
HOSTCC scripts/kconfig/lxdialog/inputbox.o
HOSTCC scripts/kconfig/lxdialog/menubox.o
HOSTCC scripts/kconfig/lxdialog/textbox.o
HOSTCC scripts/kconfig/lxdialog/util.o
HOSTCC scripts/kconfig/lxdialog/yesno.o
HOSTCC scripts/kconfig/mconf.o
HOSTLD scripts/kconfig/mconf
scripts/kconfig/mconf Kconfig
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
warning: (ARCH_IMX25 && ARCH_IMX27 && ARCH_IMX35 && ARCH_IMX51 && ARCH_IMX28) selects ARCH_HAS_FEC_IMX which has unmet direct dependencies (ARCH_IMX)
Add the option for the FEC on MX28 as well.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ethernet PHY devices have 32 registers, each 16 bits wide. Thus, the size of
the phy device should be 64 bytes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX28 comes with an extended ethernet controller (ENET/FEC) which
is backwards compatible to the FEC known from other i.MX CPUs. Add a few
adaptions to the existing driver to make it work with the MX28 FEC.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some register bits are not defined in the IMX CPUs using this FEC (at least
I did not find anything about them in the related datasheets) and they will
get (partially) a new meaning in the i.MX28 CPU. So, removing them from the
source seems the best way to avoid any accidental usage on i.MX28.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
now we need to set the dev id to -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Patch fix all similar warnings found by sparse:
drivers/net/smc91111.c:488:9:
warning: incorrect type in argument 1 (different base types)
expected void const volatile [noderef] <asn:2>*<noident>
got unsigned long [unsigned] offset
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this rework is done in order to add a phylib and allow to have phy driver support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mac address information is taken from the imx_iim driver if it's present.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this implementation is based on linux one (v2.6.35-rc5-76-gd0c6f62)
it will calculate all the clock dynamically instead of statictly
this will use also the new clock framework
it will also print the clock status after the console init
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if fec was allocated using malloc. if fec->miiphy->dev->driver != 0
miiphy_probe is not called
Signed-off-by: Jan Weitzel <J.Weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
