hush now prints the error value if a command returns a value < 0,
so do not return -1 (EPERM) when we encounter an unknown command.
Instead, return 1 so that hush is quiet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the uImage support may generate a temporary file which ought to be deleted
after usage. Due to the wrong filename this never happened. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
is_timeout call poller_call if the timeout is >= 100us
but on 1-wire bus we need to wait 500us and not more than 930us
for the bus reset. So if the poller_call is caller we can not guarantee it.
So for this introduce is_non_interruptible_timeout than we only wait.
Use it for ndelay too.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a build with a compressed default environment is done and then
environment compression is disabled, barebox_default_env.h is not
regenerated because its dependency (now barebox_default_env) is still
up to date. This results in a corrupt default environment.
This patch fixes this by adding a cmd_env_h and changing barebox_default_env.h
to FORCE. As a side effect barebox_default_env.h is no longer generated in
include/generated/ but in common/ as we have to add barebox_default_env.h to
$(targets) (extra-y).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When reading values from a DOS disk, we need to force a little endian
reading.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not have 2 set of var for defaultenv and the new
defaultenv-2.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The dependencies for generating the environment do not work properly:
- If files are removed from the defaultenv, a subsequent make will not
update the default environment.
- If CONFIG_DEFAULT_ENVIRONMENT_PATH changes, the default environment
also will not be regenerated.
This patch fixes this by introducing a cmd_env which has the content of
$(ENV_FILES) in the command so that the if_changed mechanism recognizes
a change when $(ENV_FILE) changes. This also results in a nice " ENV "
string in the build process.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CLEAN_FILES in common/Makefile are unused. All generated files
are removed from the toplevel Makefile.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is unused now and not needed. We have a board_init_lowlevel. If a
board needs some architecture setup it can always call it from its
board_init_lowlevel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We may have some disk with MBR as a first sector. In this case, the
current FAT check returns an error. However, the FAT sector exist and
the MBR can tell us where it is.
This patch add to file_name_detect_type function the ability to find
the FAT boot sector on the first sector of the first partition in case
it is not on sector 0.
It also introduce is_fat_or_mbr to check if a buffer is a FAT boot
or MBR sector
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch sync the image type list with the kernel in order to add
openrisc support.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add functions to read the barebox_arm_head, check barebox magicword
and read out the barebox image size.
Create a inital partion of 1Mb to access the barebox image on nand.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a struct envfs_inode_end with more data.
Today this will just containt the file mode to be able to add the symlink
support.
But this is compatible with the previous envfs version as they will do not
care about the extra as the previous version is just reading the filename and
then consume the extra data without using them.
Increase the envfs version to 1.0
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
they are store in the super block at byte 16th and 17th.
set the verison at 0.1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
execute_binfmt may return negative return values which hush interprets
as 'exit'. Catch this and print an error message instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'exit' used to do its job by returning value < 0. This is a sign
for hush that 'exit' is executed. This has problems:
- Often commands accidently return a negative value. This causes
the shell to exit.
- execute_binfmt returns a negative value when it does not find
a binary to execute. This again causes the shell to exit.
Returning a negative error value seems to be the right thing
to do, but catching this in the shell would mean that the exit
command does not work anymore.
- if called without arguments exit is supposed to return the code
of the last command. As a command exit has no access to this code.
This patch changes exit to be a builtin and also fixes the last return
code problem. While at it, update the help text.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow to use the number key to jump to entry.
if already on a entry % number_key jump to the next +10 one if exit
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows for creating a lzo compressed binary unsing the pbl.
Only copy the piggydata if needed.
Add CONFIG_PBL_FORCE_PIGGYDATA_COPY option
In some case we need to copy the PIGGYDATA as the link address
as example we run from SRAM and shutdown the SDRAM/DDR for
reconfiguration but most of the time we just need to copy the
executable code.
based on Sascha Hauer
Add compressed image support
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This allows for creating a pre-bootloader binary for
- nand boot
- mmc boot
- compressed image
The pbl will be incharge of the lowlevel init if needed.
The barebox will skip it.
Import string functions from linux 3.4 (arch/arm/boot/compressed/string.c) and
implement a dummy panic.
For now on introduce dummy zbarebox* targets and c code that will contain later
the decompressor. This only implemeted on ARM.
This patch is based on Sascha Hauer <s.hauer@pengutronix.de>
Add compressed image support patch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>