This has never been used in barebox and likely is incomplete
and bitrotted over time, so remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The config file looks like you just need to set ethaddr when you do
static IP. This is misleading, so put the setting to a more prominent
place.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add a config template to the defaultenv.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a (different) server is supplied to the "nfsroot" parameter, the kernel
will choose that one.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When passing a fixed IP to the kernel set it explicit to eth0. Otherwise
on systems with more than one interface dhcp might be used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit 9eac282024, the boot script
doesn't understand kernel_loc=net anymore. This patch adds backwards
compatibility so that the kernel is loaded from tftp as before.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On arm we have the concept of memory banks which can
be registered and iterated over. This is useful for
other architectures aswell, so add some generic infrastructure
for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By doing this we can remove the ptes field in struct arm_memory
which won't be present in a generic memory bank structure anymore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is broken on big endian systems since:
943b271 cfi_flash: support of u32 cmd
I looked over it and I *think* that the function was correct
for both big and little endian systems before this patch.
To support u32 cmd we only have to change the data type of
the command from u8 to u32.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Teresa Gámez <t.gamez@phytec.de>
There are no generic native ordered io accessors. This sometimes
leads to
v = in_be32(a);
v = readl(a);
in generic drivers. Instead, use io accessors which are explicitely
native ordered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Implemented an initial version of USB mass storage device driver,
supporting USB mass storage devices with SCSI interface and BBB
protocol. It implements the ATA interface and registers diskovered
LUNs with the disk driver.
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand controller on i.MX51/53 uses two base addresses. Instead
of hardcode the second address use the new shiny resources two specify
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on the Linux driver. Tested with m25p80 with CS in GPIO mode.
Clock setting support is ad-hoc as the corresponding mach is not using
the generic clock infrastructure.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following compile errors
arch/arm/mach-at91/at91sam9g45.c:185:3: error: 'ohci_clk' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9g45.c:186:3: error: 'tcb1_clk' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9g45_devices.c: In function 'at91_add_device_mci':
arch/arm/mach-at91/at91sam9g45_devices.c:258:2: warning: implicit declaration of function 'at91_clock_associate'
[...]
arch/arm/mach-at91/built-in.o: In function `at91_add_device_mci':
sam9_smc.c:(.text.at91_add_device_mci+0x1d0): undefined reference to `at91_clock_associate'
arch/arm/mach-at91/at91sam9260_devices.c: In function 'at91_add_device_mci':
arch/arm/mach-at91/at91sam9260_devices.c:251:2: warning: implicit declaration of function 'at91_clock_associate'
which were introduced in commit:
"at91: swtich to clkdev" (ae19fe26cc)
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
and busnum start at 1
as this
Bus 001 Device 002: ID 0b95:7720 AX88772
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
from linux
commit 8251544f9e28058e54c4f35b7cd13b0d191d7555
Author: Ryan Mallon <ryan@bluewatersys.com>
The uhpck clock should be divided from the utmi clock, not its parent
(main). This change is mostly cosmetic as the uhpck rate value is not
used anywhere except for the debugfs clock output.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can dynamise the boot depending on the machine
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Kconfig option LOCALVERSION so you can set a customizable suffix
to the barebox version string.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When ubi is deselected the ubi commands are still build and compiling fails
due dependences.
commands/built-in.o: In function `do_ubiattach':
commands/ubi.c:75: undefined reference to `ubi_attach_mtd_dev'
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Paul Fertser
Wolfram Sang
Marc Kleine-Budde
Rosen Kolev
Hubert Feurstein
Jean-Christophe PLAGNIOL-VILLARD
Jan Weitzel
Teresa Gámez
Alexander Shiyan