armlinux_set_architecture uses a plain integer value, this patch changes this
to use the define from mach-types.h
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Instead of writing the MAC address into the hardware on device open time
write it to the hardware when the user changes the parameter. This
way a user can change the MAC address in the hardware without actually
using the device. This helps Linux Network drivers which expect a valid
MAC address on startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sandbox compilation failed with:
gcc -Wp,-MD,arch/sandbox/lib/.tap.o.d -nostdinc -isystem /usr/lib/gcc/x86_64-linux-gnu/4.3.1/include -I/usr/include -Iinclude -P -Wall -D"KBUILD_STR(s)=#s" -D"KBUILD_BASENAME=KBUILD_STR(tap)" -D"KBUILD_MODNAME=KBUILD_STR(tap)" -c -o arch/sandbox/lib/tap.o arch/sandbox/lib/tap.c
In file included from /usr/include/bits/socket.h:32,
from /usr/include/sys/socket.h:36,
from arch/sandbox/lib/tap.c:29:
/usr/include/limits.h:125:26: error: limits.h: No such file or directory
/usr/include/limits.h uses the next_include directive
This was because of the -nostdinc
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for a generic GPMC driver
also a GPMC controller driver to allow platforms
to add NAND devices generically.
Signed-off-by: Nishanth Menon <x0nishan@ti.com>
Introduce config definitions similar to that
defined in Linux MTD layer. These allow us to
enable conditional features.
Signed-off-by: Nishanth Menon <x0nishan@ti.com>
Instead of using a trivial counting loop we poll the 32KHz oscillator
to wait for the PLLs to stabilize
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When reading from bad block aware devices we must make sure not
to read beyond eraseblock boundaries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The correct bitops implementation depends on __LINUX_ARM_ARCH__ being
set. We do not currently support this variable. Change the default case
to < armv5, so that we do not end up with clz instructions in v4 code.
This is actually a workaround, the correct solution is to set
__LINUX_ARM_ARCH__ correctly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removed the ifdef around dev_add_partition.
Since dev_add_partition becomes a void function if compiling
u-boot w/o partition support.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
We have a problem here: registering the SRAM device as DEVICE_TYPE_DRAM
works as expected, but the ARM memory tag setup code then adds an
additional node with the SRAM which is not what we want. Disable it for
now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marc Kleine-Budde
Sascha Hauer
Nishanth Menon