Of_unflatten_dtb returns a ERR_PTR value so checking it against NULL is
incorrect. Fix it in all of the places where this was happening.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The phyCORE-RK3288 aka PCM-059 is a SoM (System on Module)
containing a RK3288 SoC. The module can be connected to different
carrier boards.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To be able to use PBL console do the usual
relocate_to_current_adr()/setup_c() dance and call pbl_set_putc() to
tell the PBL console where the UART is.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The *-menu-add-entry functions no longer exist in defaultenv-2, so
remove the calls to these functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards duplicate the PS1 initialization to add a '#' at the end
of the prompt. It's not worth duplicating this for this purpose. Remove
them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The RK3288 SoC is a low power, high performance processor for mobile phones,
personal mobile internet devices and other digital multimedia applications.
It has an integrated quad-core cortex-A17 with separate NEON coprocessor.
Prepare mach-rockchip infrastructure for Rockchip RK3288 support.
Let's seperate the RK3188 and RK3288 SoCs. Later we will have two different
configs.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This creates an image that can be booted via USB.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that the MAX variant of the board is also supported by the
same code, rename the board directory to the more generic nitrogen6.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Nitrogen boards don't need it and it's actively wrong
on the 4GB variants of those boards.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Saves some boilerplate code by calculating the DRAM size
automatically.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This gets rid of the (mostly) stub top level DTs in barebox
and switches the compatible to the proper "boundary" one.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox and kernel version diverged therefore bring the device tree up to date
with respect to the kernel being the reference.
Signed-off-by: Ulrich Ölmann <u.oelmann@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The majority of the stuff currently in include/boot.h is about bootm
code implemented common/bootm.c. To be more consistent move it to a
new file include/bootm.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register the board specific environment during runtime using
defaultenv_append_directory(). Also this patch updates default config.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CS3 is used for a variety of external bus devices.
Increase the wait state for this chip select for the possibility
of more widespread use.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We store kernel and oftree in static UBI volumes now. No need
for seperate partitions any more.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Amazon Model No. D00901 Kindle3 is an E-Book reader based on the
i.MX35 SOC. The device boots in internal boot mode from a build-in eMMC,
alternatively the device may be set into USB-downloader mode when the
Vol+ key is pressed on startup.
Add support for this device and make barebox a drop-in replacement for
the factory shipped u-boot image.
Constraints for the use as drop-in replacement:
- imximg header (offset 0x400) has a maximum size of 2kB minus 16 byte
since the last 16 bytes are used to store a vendor specific hardware
desctription identifier
- the bootloader space (application plus env) is limited to 256kB minus
16 bytes when installed with offset of 4kB (the u-boot offset was 3kB).
A vendor specific device identifier is stored in the gap between
application and kernel. The vendor specific identifiers should not
be overwritten.
Notable features:
- Support for eMMC, USB, UART, I2C, SPI and Keys (except keyboard)
- Full support for vendor specific ATAGs
- usbserial barebox console access by pressing Select button at startup,
alternatively full console support on connector J14.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bits VGEN10-11 and VGEN20-22 is positioned in the Regulator Setting 0
register. This patch fixes these definitions and board (Efika MX), which
uses this voltages.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add some missing Clock Gate Register element shifters which were implemented
as magic numbers in the arm/boards directory. Use the new shifters for
inproved code readability.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With commit 962d8b89d2 ("imx35-regs: add defines for USB and SD") the
shifter argument for the iMX35 ESDHC1 CGR instance has been erroneously
assigned to CGR1 instead of CGR0. Fix this for the eukrea-cpuimx35 board.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Macros for three PLL setups got cloned in different board specific subdirs.
Re-unify those macros into a common place and avoid checkpatch 80-char
warnings when creating a new board subdir.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a redundant barebox partition to improve nand safety at
least a little bit.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make it possible to write barebox image to multiple partitions
like xload partitions.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a support for a redundant barebox backup partition if loading
barebox image from first barebox partitions fails.
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The imx53 SOC features 128kB of internal SRAM which is commonly used in
early stages of barebox to store the stack. Avoid magic numbers while
addressing this RAM.
Signed-off-by: Alexander Kurz <akurz@blala.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rename the already global array of default memory settings to make the
intended usage more obvious.
Also make generous use of the const keyword.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For the phyCORE-i.MX6 add an automount command for the first partition
on the eMMC device.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some phyCORE-i.MX6 variants have eMMC instead of a NAND chip. Provide an
update_handler for them.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The extra environment folder for the phyCORE-i.MX6 had the suffix
'-mira'. That's the name of a baseboard. Since the bootloader is generic
for all baseboards, use a generic suffix for the environment folder.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Andrey Smirnov
Wadim Egorov
Steffen Trumtrar
Uwe Kleine-König
Lucas Stach
Ulrich Ölmann
Alexander Shiyan
Teresa Remmet
Alexander Kurz
Raphael Poggi
Stefan Christ