use i2c-gpio as the hw ip is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use i2c-gpio as the hw ip is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use i2c-gpio as the hw ip is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use i2c-gpio as the hw ip is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use i2c-gpio as the hw ip is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use i2c-gpio until we add the hw drivers
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OUI will be 'tml' => 76:6D:6C
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The modules from cogent use a 1.8V nand
And have the mci card detect broken as they use the flash vdd as vdd for the
cd which need > 2V
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
for bootp specify the module version via client_id as
%{BOARD}-%{VERISON}
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OUI will be 'ron' => 72:6F:6E
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OUI will be 'ron' => 72:6F:6E
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OUI will be 'ron' => 72:6F:6E
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the phy reset neet to be done before the fec driver is registered
as we accesst the phy at the fec probe time
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The same issue was fixed in the Linux kernel in commit
66ddfc6 (mx35: add a missing comma in a pad definition)
for 2.6.33-rc7.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox size is 384KiB
and for the official atmel release we need to rootfs at 8M
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise we get the following warning when sdl is not installed
on the compile host:
Package sdl was not found in the pkg-config search path.
Perhaps you should add the directory containing `sdl.pc'
to the PKG_CONFIG_PATH environment variable
No package 'sdl' found
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was once disabled because we had no board support. This has
changed, so enable the S5P board support in the config so that
the friendlyarm_tiny210_defconfig actually builds for the correct
machine.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
board_init_lowlevel is no longer called from generic code, so we can't
just return from in. Instead we have to jump to board_init_lowlevel_return
manually. For the a9m2440 board one case was missed to convert. This
is broken since:
| commit faf7b7af6e
| Author: Jan Luebbe <jlu@pengutronix.de>
| Date: Mon Sep 24 10:18:34 2012 +0200
|
| ARM: give boards control of the reset entry point
|
| On some SoCs (for example AM35xx), the ROM bootloader passes useful
| information in r0 when jumping to barebox.
|
| To avoid overwriting this in the generic reset code, we introduce
| common_reset as a C function and as an assembler macro. This is then
| called form the reset entry point (either in common or in board code).
|
| This patch is based on code by Sascha Hauer <s.hauer@pengutronix.de>.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Function add_image needs a allocated malloc space.
This is only available in the second getopt loop.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- increased the region size for OMAP3, as it was not correct
- decrease region size for OMAP4 to prevent overlapping.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Sascha Hauer
Fabio Porcedda
Uwe Kleine-König
Teresa Gámez
Alexander Aring
Vicente