On MIPS there are two segments in CPU address space that
can be used for untranslated memory access: KSEG0 and KSEG1.
KSEG0 is used for cached access and KSEG1 is used for
uncached one.
The instroduced mips_add_ram0() function registers two
address regions for memory access: one in KSEG0 and
the other one in KSEG1.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function remap_range in arm architecture to make it
global accessable. For example command 'memtest' can change
pte flags to enable or disable cache.
Add dummy function for others architectures that doesn't
have mmu or pte support.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch is based on ARM pbl support and allows
creating a pre-bootloader binary for compressed image.
For different MIPS SoCs (or even for different boards based
on the same SoC) the operations carried on in start-pbl.S
can be very different. The additional constraints can be imposed
on the size of the boot code or the special magic labels in
the beginning of the boot code; In some cases it could be
necessary to show CPU is alive as early as possible
(transmit a char via UART or blink a LED).
So the demands for pbl start operation can be very different.
E.g. malta board store boot code at the NOR flash mapped
to the MIPS power-on address (0xbfc00000); it is the most
simple case: we need just copy pbl image from direct-mapped
flash to RAM and jump there.
The XBurst-powered boards store boot code in the beginning
of a NAND flash or in the beginning of SD/MMC card.
In this case we must use simple and short NAND or SD/MMC access
routines to copy pbl image to RAM.
To meet so different demands a simple technique is selected:
* MIPS pbl entry point located in file arch/mips/boot/start-pbl.S.
* MIPS pbl code (see start-pbl.S) assumes that every pbl-enabled
board has a arch/mips/boards/<BOARD>/include/board/board_pbl_start.h
header file. This file must contain definition of
the board_pbl_start macro. This macro is used as start of pbl image;
* the most popular asm routines (stack setup, relocation to link
address, NS16550 initialization (WIP) and so on) are containt
in the arch/mips/include/asm/pbl_macros.h header file.
So board pbl macro can use it if necessary.
It is possible to create similar headers with macros for each
specific SoC; so even if we have many different boards based
on the same SoC the board_pbl_start macro for every board
can be short and clear.
* after board-specific initialization the stack pointer
is initialized and pbl C code is started.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
putc already is a regular barebox function. To avoid conflicts and
confusions just let architectures define PUTC_LL directly instead
of going through this addiotional redirection.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mips currently uses local_irq_save and local_irq_restore
which are not defined. Drop them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Antony Pavlov
Alexander Aring
Marc Kleine-Budde
Jean-Christophe PLAGNIOL-VILLARD