This converts the Freescale i.MX53 loco aka qsb board to
multi image. The image will be named:
barebox-freescale-imx53-loco.img
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the babbage board to probe from devicetree for all
for all devices we currently support probing from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mc13892 driver knows that it needs spi-cs-high, so the mc13892
will work. The dataflash also connected to this bus though can only
be probed when the mc13892 is inactive. Due to driver probe differences
we can only make sure the mc13892 is inactive when we put the information
into the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel dts relies on reset default pad settings for the FEC.
Add correct pad settings.
Also, add missing MX51_PAD_NANDF_D11__FEC_RX_DV.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using a builtin dtb the builtin dtb is built twice, once
from as a dependency of the 'dtbs' target and once as a dependency
of the corresponding dtb.o target. This can happen in parallel
with parallel make which results in build corruption when two
processes try to generate the dtb at the same time. Typical errors
include:
fixdep: error opening depfile: arch/arm/dts/.imx51-babbage.dtb.d: No such file or directory
make[1]: *** [arch/arm/dts/imx51-babbage.dtb] Error 2
fixdep: arch/arm/dts/.imx51-babbage.dtb.d is empty
mv: cannot stat `arch/arm/dts/.imx51-babbage.dtb.tmp': No such file or directory
make[1]: *** [arch/arm/dts/imx51-babbage.dtb] Error 1
To fix this build the devicetree blobs using extra-y instead of
a separate target.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Tegra arch will be fully based on device tree and most boards
shouldn't need anything more than the generic drivers and arch code.
This adds generic tegra20 board support, but since we currently have
no way to combine an image with a devicetree other than compiling it
into the single image we also add Colibri T20 on Iris support here
and add a defconfig for it.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a pinctrl driver for the Tegra 20 line of SoCs. It only
supports the three basic pinconfiguration settings function mux,
tristate control and pullup/down control.
The driver understands the same devicetree bindings as the Linux one,
unimplemented pinconfiguration options will be ignored.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently only implements system wide reset functionality.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Replace the ad-hoc clocksource implementation with a proper driver for
the Tegra 20 timer. This driver is able to do the required hardware
initialisation itself.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only a basic set of clocks is supported. This is a temporary solution
and will go away as soon as the port of the Tegra common clock code from
the Linux kernel is ready to go.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add rules to generate dtb files in arch/arm/dts/
- add an initcall which unflattens and probes the internal devicetree
- Add skeleton devicetree
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Philipp Zabel
Sascha Hauer
Lucas Stach