This will automatically call barebox_update for the transfered file if
it is an ARM Barebox image and the destination file is defined by some
update handler.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_request_mem_region returns a void * which shall be checked with
IS_ERR(), but in some cases the valid pointer returned clashes with
error values. This is especially the case on some Atmel SoCs.
This introduces dev_request_mem_resource which returns a struct resource
instead which in any case can be checked with IS_ERR(). It's the drivers
responsibility then to get the IOMEM pointer from the resource.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a function to check for the existence of an update handler
based on the supplied bbu_data.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initial regmap support. Function prototypes are from
the Kernel, the implemention is mostly rewritten. Currently the
regmap support is limited to the bare minimum to get started.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The HABv4 functions need access a part of the ROM which is
located in the zero page. This must be done early, before the
MMU has been configured and the zero page has been set to faulting.
The HAB functions currently use cpu_is_imxxy(). At the stage where
HAB is called the i.MX CPU type variable is not yet initialized,
so this code only works when only one i.MX type is enabled and
cpu_is_imxxy() are compile time constants.
To fix HAB support when more than one i.MX type is enabled make the
HAB status function SoC specific so that we can drop the use of
cpu_is_imxxy().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit changes the behaviour of the 'miitool'. Now in order to show
PHY's link information 'miitool' should be invoked as such:
miitool -s [PHY]
Also, implment code to allow to register a dummy PHY device in order to
be able to perform raw MDIO bus access.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on the original patch for linux:
commit 00b4d9a14125f1e51874def2b9de6092e007412d
Author: Maxime COQUELIN <maxime.coquelin@st.com>
Date: Thu Nov 6 10:54:19 2014
On some 32 bits architectures, including x86, GENMASK(31, 0) returns 0
instead of the expected ~0UL.
This is the same on some 64 bits architectures with GENMASK_ULL(63, 0).
This is due to an overflow in the shift operand, 1 << 32 for GENMASK,
1 << 64 for GENMASK_ULL.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Add mdiobus_get_bus() -- a function to get a MDIO bus by its number
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Port bitbanged MDIO framework and gpiolib MDIO bus driver that uses it
from Linux kernel.
Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move semaphore related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move Linux wait queue related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move mutex related defines to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There's not only HABv4 but also HABv3. No need to put the corresponding
code in separate directories, so rename the habv4 directory to hab.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move spinlock related definitions to its original place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move cond_resched() from barebox-wrapper.h to its original
place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move Linux file system structs from UBIFS to central place.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implementation is inspired by U-Boot's FIT support. Instead of
using libfdt (which does not exist in barebox), configuration signatures
are verified by using a simplified DT parser based on barebox's own
code.
Currently, only signed configurations with hashed images are supported,
as the other variants are less useful for verified boot. Compatible FIT
images can be created using U-Boot's mkimage tool.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So long struct bootm_data.verify is a bool which enables CRC checking
(hashing). Extend this to a enum and add support for signature checking
in the same option. This also adds the corresponding globalvar and a
-s option to bootm.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from U-Boot and adopted to barebox with little changes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In barebox the function digest_alloc() allocates a digest based on a string.
When a subsystem already uses an integer value to identify a digest it makes no
sense to create a string and pass it to digest_alloc(), where it is parsed
again. This patch adds the possibility to get a digest by an enum.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Both the bootm and the boot code initialize the struct bootm_data
with defaults from the bootm global variables. Create a common
function for doing this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The initrd code is distributed in several places in the bootm code.
Move it all together in bootm_load_initrd().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The uImage format uses numbers for to identify the different
parts of a image, but the FIT image format uses names. To better
integrate the FIT image format into bootm always use names and
convert them to numbers when necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ARM do_bootm_linux is not only called with uImages but also with
raw images, so we can't use uimage_get_size() here. Introduce
bootm_get_os_size() which handles the different image types.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the ability to control barebox over serial lines. The regular
console is designed for human input and is unsuitable for controlling
barebox from scripts since characters can be lost on both ends, the data
stream contains escape sequences and the prompt cannot be easily matched
upon.
This approach is based on the RATP protocol. RATP packages start with a
binary 0x01 which does not occur in normal console data. Whenever a
0x01 character is detected in the console barebox goes into RATP mode.
The RATP packets contain a simple structure with a command/respone
type and data for that type. Currently defined types are:
BB_RATP_TYPE_COMMAND (host->barebox):
Execute a command in the shell
BB_RATP_TYPE_COMMAND_RETURN (barebox->host)
Sends return value of the command back to the host, also means
barebox is ready for the next command
BB_RATP_TYPE_CONSOLEMSG (barebox->host)
Console message from barebox
Planned but not yet implemented are:
BB_RATP_TYPE_PING (host->barebox)
BB_RATP_TYPE_PONG (barebox->host)
For testing purposes
BB_RATP_TYPE_GETENV (host->barebox)
BB_RATP_TYPE_GETENV_RETURN (barebox->host)
Get values of environment variables
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Andrey Smirnov <andrew.smirnov@gmail.com>