As the place for the atags now is determined automatically the call
from the boards can be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a board does not specify a place for the atags list default to
SDRAM start + 0x100. The vast majority of boards uses this place
anyway, so the call to armlinux_set_bootparams() can be removed
for most boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A compile error appears in libubigen on PXA architecture, because of a
division of an long long by a int :
/home/rj/mio_linux/barebox/lib/libubigen.c:105: undefined reference to
`__aeabi_ldivmod' arm-linux-gnueabi-ld: BFD (GNU Binutils for Debian)
2.20.1.20100303 assertion fail ../../bfd/elf32-arm.c:12497
Fix it by using div_u64 instead.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't return after freeing stored devicetree if also loading ist wanted.
Allow "oftree -f -l my.dtb"
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The GbE support based on the patch for generic 'mii-tool', see
http://ftp.debian.org/debian/pool/main/n/net-tools/net-tools_1.60-24.2.diff.gz
We need to note Jean-Christophe PLAGNIOL-VILLARD for his
initial GbE support patch:
http://lists.infradead.org/pipermail/barebox/2013-February/012634.html
Generic 'mii-tool' GbE support patch has some disadvantages:
1. 1000baseT-HD is prefered to 1000baseT-FD;
2. show GbE-features for 10/100 only phys (e.g. Level One LXT971).
This patch fixes this disadvantages.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
without "#ifndef __ASSEMBLY__ #endif", an assembly file
including this file will break compilation.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->read returns the number of bitflips as positive numbers.
Instead of returning these numbers Return -EUCLEAN when the bitflip
threshold has been reached, 0 otherwise.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox does not need the screen size directly, but we pass the
framebuffer to Linux via simnplefb it is desirable to pass the
full size of the framebuffer. Default to calculated values from
the screen resolution.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IPU has a fractional pixelclock divider. When used, this produces
clock jitter which especially LVDS transceivers can't handle. Allow
to disable it via platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When requested 32bit formats the IPU generated a 24bit format instead.
Implement real 32bit format (xxrrggbb) and let the IPU generate a 24bit format
when requested.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to hardcode the channel parameters for the rgb offsets,
we can calculate them from the fb_bitfields. ipu_ch_param_write_field()
is the same as is the mainline IPUv3 driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bitfields are not portable and one should make assumptions of the
layout of bitfields. Replace them with the ipu_ch_param_write_field()
which is already used in the mainline IPUv3 driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add the same target barebox.s (with a lowercase 's')
to make both work with barebox.S and barebox.s.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dm9000 needs a resource for an index register and one for
the data register. Both should have a size of the access width,
and not two times the access width. The current code is probably
a leftover when the dm9000 had only one resource.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes execution of a function has to be delayed, for example
when a backlight can only be turned on when the picture has stabilized.
To help in such situations add a convenience function around the poller
stuff to call a function after a delay.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the IPU the way the display is connected is completely independent
of the framebuffer pixel format. So instead of specifying a pixel width
in platform_data we have to specify how the display is connected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OpenCores 10/100 Mbps ethernet MAC is often available on
OpenRISC-based SoCs and is supported by the OpenRISC architectural
simulator (or1ksim) as well.
The patch enables the driver on the 'generic' openrisc board.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch introduces a driver for the OpenCores 10/100 Mbps ethernet
MAC core, ported from Linux kernel with small changes.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
am33xx_register_ethaddr must be called before cpsw driver start.
Move it from devices_initcall to coredevice_initcall.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add compatible phytec,pcm051
clean up pinmux_emac_rmii1_pins
introduce davinci_mdio_default pin group
set AM33XX_MAC_MII_SEL via dts rmii-clock-ext
use bch8 as ecc mode
add pagesize to 24c32@52
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Prober slave_num is needed by cpsw_gmii_sel_am335x to calc reg value.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the -s option all mii buses can be scanned for devices so
that they are available without doing network operations. Also,
now *all* phy devices on a mii bus can be examined, not only
the one attached to an ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed when a phy gets registered outsize of phy_device_connect
but has to be attached to an ethernet device later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If during a phy_device_connect a phy already has an ehternet device
this can only mean it's already attached to another device. return -EBUSY
in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>