When building sandbox with ccache, one would hit warnings such as:
warning: 'struct mmsghdr' declared inside parameter list
on random files; a way to reproduce this issue is to build a simple
file doing just:
#include <sys/socket.h>
int main(void) {
return 0;
}
gcc -Wall -P -c -o foo foo.c
But actually the -P flag is only useful when generating non-C files,
such as linker scripts in the case of barebox. Removing the -P flag
from all the gcc invocations, except when generating .lds files makes
the warning go away. It turns out that this is what
linux/scripts/Makefile.build also does nowadays.
Signed-off-by: Loïc Minier <loic.minier@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Running the 'bootz' command always fails with
could not read <some file>
due to wrong usage of pointers and structures. This is the second try to fix
the 'bootz' command. At least on my target it is now be able again to load a
kernel without any error.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Running the 'bootz' command always fails with
could not read <some file>
due to it loads only a size of a pointer, instead of the size of the expected
header structure.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch remove those warnings in nios2 drivers:
include/io.h:7:5: warning: "__BYTE_ORDER" is not defined
include/io.h:7:21: warning: "__BIG_ENDIAN" is not defined
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Contrary to other Atmel boards, the AT91SAM9M10G45EK board file only
describes the case where NAND is used as the storage for Barebox and
its environment. Therefore, it makes sense to enable the Atmel NAND
driver in the default configuration for this board.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The environment partition was overlapping the Barebox partition in
those three Atmel boards. Saving the environment resulted in the
Barebox being overwritten.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We switched to resources recently and the nand controller
of the i.MX53 needs two of them, so fix the helper in the
same way as the i.MX51
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds lowlevel (AIPS, PLL, L2) initialization for i.MX53 boards.
This is a direct transcription of Freescales U-Boot assembler code
with the exception that we initialize PLL1 with 1000MHz and assume
that all necessary voltages are already adjusted when we arrive here.
It must be explicitely called from the boards so a board is free to
do it's own initialization. However, boards should use this code
and make it more configurable if necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the sha224sum is nearly the same as sha256sum except for the init of the
context and the hash length
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes alignment for the "System Type" menu entry.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
tested on imx53 loco board with a Multi uImage file
generate like this
mkimage -A arm -O linux -T multi -C none -a 0x70008000 -e 0x70008000 -n Linux-2.6.35.3-00745-gce4c61a-dirty -d zImage:rootfs.cpio.lzma uImage.Multi
and boot via bootm
bootm -r @1 -L 0x72000000 /dev/ram0.kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
needed for multi image support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following compile errors
arch/arm/mach-at91/at91sam9g45.c:185:3: error: 'ohci_clk' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9g45.c:186:3: error: 'tcb1_clk' undeclared here (not in a function)
arch/arm/mach-at91/at91sam9g45_devices.c: In function 'at91_add_device_mci':
arch/arm/mach-at91/at91sam9g45_devices.c:258:2: warning: implicit declaration of function 'at91_clock_associate'
[...]
arch/arm/mach-at91/built-in.o: In function `at91_add_device_mci':
sam9_smc.c:(.text.at91_add_device_mci+0x1d0): undefined reference to `at91_clock_associate'
arch/arm/mach-at91/at91sam9260_devices.c: In function 'at91_add_device_mci':
arch/arm/mach-at91/at91sam9260_devices.c:251:2: warning: implicit declaration of function 'at91_clock_associate'
which were introduced in commit:
"at91: swtich to clkdev" (ae19fe26cc)
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Modified the i2c_imx driver to support data-only transfers, without
command byte. This allows to construct more complex i2c transfers
and support non genuine devices like Atmel ATxx secure memory, where the
master reads data after a write command.
Signed-off-by: Rosen Kolev <rosen.kolev@amk-drives.bg>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is required to avoid warnings like this:
In file included from <some file>:
include/io.h:7:5: warning: "__BYTE_ORDER" is not defined
include/io.h:7:21: warning: "__BIG_ENDIAN" is not defined
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently it's not implemented by any driver so add a note to the
documentation.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Documentation says it should default to 8 when not specified
explicitly by the device data.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Call setup() before registering the device because registering leads
to a probe routine of the slave device and that requires an
initialised master.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This brings consistency to the way variables are named and used
according to the Freescale documentation. Also, since user is
supplying row indicies, and not offsets, it's reasonable to amend the
error message accordingly.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds additional Kconfig help to clarify the way to use barebox
for eFuses handling.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can choose the initrd via @<num>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Loïc Minier
Juergen Beisert
Antony Pavlov
Sascha Hauer
Franck Jullien
Thomas Petazzoni
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Robert Schwebel
Fabian van der Werf
Hubert Feurstein
Rosen Kolev
Paul Fertser