The TX6 boards come with 3 different PMIC variants from which we
currently only support the ltc3673. Detect the other two by i2c
address and set them up correctly. The code is based on the karo
U-Boot port.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device tree for the 801x variant only contains displays. The
displays are not part of the SoM, but instead of the baseboard,
so they should be described in a baseboard dts. With this patch
we rather include the common tx6x dtsi file and drop 801x from
the barebox device tree names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6q variant is basically the same as the i.MX6dl variant, just
with another SoC and the usual i.MX6q/i.MX6dl adjustments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The TX6 board come with either NAND flash or eMMC as primary
storage medium. This adds support for the eMMC variants.
We can detect if we have NAND or eMMC by looking at the
bootsource which will be configured accordingly. This
way we can modify the device tree during runtime and do
not have to create a new image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DIV_ROUND_UP is defined in include/linux/kernel.h. Use that instead.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move all of the common clock ungating code in early UART
initialization into a dedicated subroutine that can be shared by all
of the users.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
NOTE: Boards 'karo-tx25' and 'tqma53' can benefit from this
refactoring as well, but they were not converted because of the lack
of i.MX25 or i.MX53 based hardware to test on.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Karo TX6X family consists of different i.MX6Q/DL based System-on-Modules.
Add support for the TX6u 801x modules, that have an i.MX6DL SoC.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Markus Pargmann
Andrey Smirnov
Masahiro Yamada
Steffen Trumtrar