The majority of the stuff currently in include/boot.h is about bootm
code implemented common/bootm.c. To be more consistent move it to a
new file include/bootm.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit create a common directory, lib/,
for arm and arm64 common code.
It also create lib32/ and lib64/ for 32bit
and 64bit code respectively.
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
According to the kernel documentation it is recommended to place the
compressed image between 32 MiB and 128 MiB. The DTB and initrd should
be placed above 128 MiB. We will follow the recommendation as long as we
have enough RAM. If this is not the case, we fall back to the scheme.
This change is required because of the ARM default kernel config changes
regarding RODATA layout, which lead to an increased compression factor
of the kernel image.
This should be regarded as an intermediate solution until there is a
mechanism for the kernel image to report the decompressed layout
requirements to the bootloader.
Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
bootm has a C API, so the bootm options have to depend on the
option providing the bootm code (CONFIG_BOOTM), not on the
option providing the command (CONFIG_CMD_BOOTM). Fixing the
dependencies makes it possible to fully use bootm from C without
enabling the bootm command support.
This also removes the CMD_ prefix from the options which means
we have to update the defconfigs aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CONFIG_FITIMAGE is the variable to depend on, not
CONFIG_CMD_BOOTM_FITIMAGE which is only a wrapper option to
let CONFIG_FITIMAGE select from the bootm Kconfig menu.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The callers of get_kernel_addresses() are not interested in the
spacing after the kernel image, they are interested in the
place where they can put device tree and initrd, so pass
a pointer to mem_free to get_kernel_addresses().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move the call to sdram_start_and_size() into get_kernel_addresses() and
remove the now unnecessary parameter mem_start.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current vector table setup has some shortcomings. First of all
currently the case when the high vectors are inside SDRAM (that is,
SDRAM reaches the end of the address space) is not supported. In this
case we create a secondary page table for the section containing the
vectors which gets overwritten by the general SDRAM secondary page
table entries creation afterwards. On ARMv7 and later the exception
table setup can be improved: Here the vector table address is configurable
in the VBAR register. We can use this register to skip remapping the
vector table.
With this patch we first try to use the VBAR register before doing
something else. Also, when we have to use the high vectors we first
try a request_sdram_region to test if the vector table memory is already
mapped. While at it sprinkle some comments into the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the kernel load address is chosen by the user/image we need
to check if the kernel needs to relocate itself before decompression.
If that's the case the spacing behind the kernel must allow for this
relocation without overwriting anything placed behind the kernel.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of having the same logic for uImage and zImage types duplicated
in the code, split it out into a separate function. This does not change
the behavior of the calculation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implementation is inspired by U-Boot's FIT support. Instead of
using libfdt (which does not exist in barebox), configuration signatures
are verified by using a simplified DT parser based on barebox's own
code.
Currently, only signed configurations with hashed images are supported,
as the other variants are less useful for verified boot. Compatible FIT
images can be created using U-Boot's mkimage tool.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The initrd code is distributed in several places in the bootm code.
Move it all together in bootm_load_initrd().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can make the dryrun option more useful by calling into the handlers.
With this we can detect more cases that can go wrong during boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox can be called with the kernel calling convention, so
we can reuse the handler instead of creating a barebox specific
handler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ARM do_bootm_linux is not only called with uImages but also with
raw images, so we can't use uimage_get_size() here. Introduce
bootm_get_os_size() which handles the different image types.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The asm code to do the actual call into the kernel (or another
barebox) when compiled in thumb2 mode isn't necessary. gcc generates
a perfectly good calling sequence from a normal function pointer call.
If it didn't, the code in bootstrap_boot() that uses a function
pointer to jump to the 2nd stage barebox from an xloader wouldn't
work.
It appears to be allowed that the call to kernel() could return, as
neither start_linux() nor kernel() are marked noreturn, and there is
code after calls to start_linux().
The asm code has a bug in this case, as it uses bx and not blx, and
thus doesn't set the link register. Since it's a tail call, this
would be okay, but only if the LR value from the start of
start_linux() (and the callee-saved registers) are restored
beforehand, which isn't done. The gcc generated call sequence will do
this.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To be able to use dump_stack() without support exception handling the
definition of dump_stack has to move to a file that is actually compiled
without ARM_EXCEPTIONS.
Fixes: d332597c7c ("ARM: make exception handling optional")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add semihosting API implementation and implement a filesystem driver
to access debugging host filesystem using it.
Tested on Freescale SabreSD board (i.MX6Q) using OpenOCD
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.
The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.
To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
exitcall infrastructure is based on initcall infrastructure.
It allows to have and use exit call hooks on barebox shutdown.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, MIPS is the only architecture that needs
include/generated/asm-offsets.h, but we have got ./Kbuild file now.
It is a good reason to move asm-offsets.h rule from arch/mips/Makefile
to ./Kbuild and add dummy asm-offsets.c for the other architectures.
asm-offsets.h would be useful for all the architectures.
This commit does not implement include/generated/bounds.h,
but if necessary, it is easy to implement it.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:
- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property
Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.
Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.
There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.
For device tree boards the model and of_compatible tags are automatically
generated.
Example output of the imd tool for a Phytec phyFLEX image:
build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android image format makes the same mistake as the U-Boot uImage
format: It makes the load address mandatory. In a way it is even worse
since the 'fastboot' host tool thinks that 0x10000000 is a good default
when no address has been specified on the command line.
Instead of only relying on the Kernel load address in the image try
to automatically find a good base address when requesting the addresses
from the image failed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For small systems we would put the zImage at 32KiB after
the start of memory, and put the DT a bit after the uImage.
The kernel will always try to relocate itself and overwrite
the DT.
Try to be more clever at uImage placement to avoid
triggering the kernel relocation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For small systems we would put the zImage at 8MiB after
the start of memory, and put the DT a bit after the zImage.
When we encounter an image which is bigger than 8MiB
uncompressed, the kernel would try to relocate itself
and overwrite the DT.
Try to be more clever at zImage placement to avoid
triggering the kernel relocation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This improves the initrd/devicetree placement in the bootm code.
We used to put the initrd at the start of the kernel + 8MiB. This
of course fails once the kernel gets bigger than 8MiB. Also the
place for the devicetree was allocated using malloc(). This can
lead to the problem that the devicetree is outside of the kernels
lowmem and thus not reachable for the kernel.
With this patch __do_bootm_linux gets a pointer to free space where
the devicetree and the initrd can be safely put.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The zImage should be placed where it won't be overwritten by the
uncompressed image, otherwise the kernel decompressing code has
to relocate the zImage before decompression. As Kernels tend to
become bigger put it into 32MiB into RAM if we have enough RAM
available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
__do_bootm_linux is called from the uImage, zImage and raw handlers.
In case of the zImage handler the kernel will already be loaded and
the kernel load code in __do_bootm_linux will do nothing. Move the
loading code to do_bootm_linux so that __do_bootm_linux will always
be called with the kernel already loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The common bootm code used to load uImage contents to SDRAM
before calling into the handlers if possible. This makes the
handlers complicated since they have to handle many cases. Instead,
introduce a helper to load the os after the handlers have figured
out a good load address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Start a 2nd stage barebox with the Linux Kernel calling convention.
Right now barebox does not interpret ATAGs or devicetree passed
to it, but it doesn't hurt to pass parameters so that future bareboxes
can use them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a board does not specify a place for the atags list default to
SDRAM start + 0x100. The vast majority of boards uses this place
anyway, so the call to armlinux_set_bootparams() can be removed
for most boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds an .oftables section right before .dtb section with
BAREBOX_CLK_TABLE to ARM linker script.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>