This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Drivers need to get their driver data either from devicetree or the platform
information. It should matter for the driver where this data comes from, so
introduce a common function for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It starts the switch and provides basic access to the registers.
This driver could also work with some other Micrel switches, possibly
with some small changes.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is common for drivers to handle multiple similar devices. On
Linux the driver can distinguish between the devices using the
platform_device_id mechanism. Introduce the same for barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Printing device context normally should be "driver instance:",
but instead we printed the device name twice. This patch fixes
this and as a bonus makes the binary a bit smaller. Instead of
a '@' between driver and instance this function now prints a
whitespace which is a bit more like Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a I2C bus on which the I2C devices and drivers register.
This makes it cleaner as I2C devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a SPI bus on which the SPI devices and drivers register.
This makes it cleaner as SPI devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Upcoming patches will put I2C/SPI on their own busses with
spi_register_driver / i2c_register_driver which will only
be available if the subsystem is enabled. We could provide
static inlines, but it wouldn't make much sense to compile
a spi/i2c driver if the corresponding subsystem is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use 512k NAND Partion for barebox in enviroment and boards code
pcm049: use 4MB for kernel
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since 99e72c8bbd on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use be(xx)_to_cpu function to switch endianness intelligently.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch sync the image type list with the kernel in order to add
openrisc support.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In a previous patch, Sascha needed to add __ashrdi3 and then linked
to libgcc. This patch add the ashrdi3 function in the arch/openrisc/lib
directory and remove the libgcc dependency.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
linux.bootargs.dyn.* will be cleared at the beginning of boot
This is need for boot sequence to do not have the previous boot param.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will allow to do not check it everywhere
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not taint if not enabled
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we may try to get it from the env.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is an alternative to LodePNG take from http://forge.voodooprojects.org/
which is base on picoPNG C++ wrote by Lode Vandevenne. The same author as
LodePNG.
PicoPNG only support RGBA PNG8
The source code of picopng.c was just adapted to be compliant with C89 and drop
the internal ZLIB support. Coding style untouched.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use LodePNG version 20120729 from http://lodev.org/lodepng/
The original coding style is keeped to simplify update.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to render rgba image with or without hw support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to reset the screen to a default color when using transparent
PNG.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to support bmp and png
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can add other format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so be can add more format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allow to detect the amba device and use the right driver for it at
runtime.
With pl011 amba support (ARM & ST Variant)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=m4nO
-----END PGP SIGNATURE-----
Merge tag 'amba_bus' of git://git.jcrosoft.org/barebox into for-next/amba
arm: Introduce ARM AMBA bus
This allow to detect the amba device and use the right driver for it at
runtime.
With pl011 amba support (ARM & ST Variant)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Upcoming patches will put I2C/SPI on their own busses with
spi_register_driver / i2c_register_driver which will only
be available if the subsystem is enabled. We could provide
static inlines, but it wouldn't make much sense to compile
a spi/i2c driver if the corresponding subsystem is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we may specify file in the defconfig
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add missed case statement to ignore 'i' parameter
in first getopt loop.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix setting of size_t ssize_t and ptrdiff_t for 32 bit and
64 bit systems.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GCC versions below 4.6 don't set __BYTE_ORDER__
with __ORDER_LITTLE_ENDIAN__. So it's better to use
__BYTE_ORDER and __LITTLE_ENDIAN instead.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix casting on min argument, to avoid warnings on 64bit build.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to detect the amba device and use the right driver for it at
runtime.
The code is base on linux 3.5.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Sascha Hauer
Jan Luebbe
Jan Weitzel
Eric Bénard
Franck Jullien
Jean-Christophe PLAGNIOL-VILLARD
Renaud Barbier
Wolfram Sang
Alexander Aring