The NT disk Signature is a unique 32-bit value in the MBR allowing
to identify a MSDOS partitioned disk. The signature can be used to
specify the Linux rootfs.
This patch adds support for the NT disk Signature in the form of a
device parameter which can both be read and written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I'm not sure but I guess we don't need defined(__I386__) check.
I kept it for now.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In case he configures with make ARCH=x85 menuconfig,
config SPI will be set to "y". And he will got an error on spi.h.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use blk->ops->read/write. This bypasses the caching block
layer and was never intended like this. The upper API to the block layer
is the cdev layer. This patch adds block_read and block_write functions
and uses them where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
block_read and block_write collide with a to-be-introduced
global function, so rename the file operation functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds host tools for i.MX to generate the i.MX internal
flash header format and a tool to upload these images to an
i.MX SoC via USB.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a port of the official PLL errata workaround from Freescale.
The PLL's in the i.MX51 processor can go out of lock due to a metastable
condition in an analog flip-flop when used at high frequencies.
This workaround implements an undocumented feature in the PLL (dither
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.
This is based on U-Boot commit:
commit 9db1bfa110ac411ab3468e817f7f74b2439eb8c8
Author: David Jander <david@protonic.nl>
Date: Wed Jul 13 21:11:53 2011 +0000
ARM: MX51: PLL errata workaround
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This chipselect is used on RDK Zigbee connector. Since we cannot
define additional chipselect after SPI is initialized, define this one
in main SPI initialization in PCM038 SOM.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We always must decend into the pbl build. Otherwise it doesn't get
rebuilt if only sourcefiles from the pbl are changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a device does not have bad blocks loop over the eraseblocks
in the driver instead of the core. This allows the mtd_dataflash
driver to erase blocks instead of pages to gain more speed during
erasing. Also the mtd_dataflash driver modifies the erase_info
struct which causes the outer loop in the core to never end.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Many cfi chips support 16 and 8 bit modes. Most important
difference is use of so called "Q15/A-1" pin. In 16bit mode this
pin is used for data IO. In 8bit mode, it is an address input
which add one more least significant bit (LSB). In this case
we should shift all adresses by one:
For example 0xaa << 1 = 0x154
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default baseboard for the tqma53 (MBa53) uses UART2 for debug console.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On ARM the boarddirs are only cleaned due to the regular file
pattern search, but are not explicitly cleaned. This makes
it impossible to clean files which are not matched by a pattern
but have to be explicitly cleaned due to adding them to extra-y.
This patch changes the board-/board-y variables to += so that
we can use $(board-) to add it to common-. This way the board
directories are also cleaned.
While touching the board-y variables anyway order them
alphabetically.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a command to generate the zynq image instead of generating it
directly. This causes a rebuild exactly when necessary and prints
a "ZYNQ-IMG" to the commandline during compilation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pbl used 'zbarebox.bin' as target instead of the real file. This
lead to strange effects that the images depending on zbarebox.bin were
only built every second time. This uses the full path as target.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We had pbl_cc__o_c instead of pbl_cc_o_c. This caused all pbl object
files to be rebuilt everytime due to missing .cmd file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the babbage board to probe from devicetree for all
for all devices we currently support probing from devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Masaki Muranaka
Masaki Muranaka
Alexander Shiyan
Oleksij Rempel
Oleksij Rempel
Steffen Trumtrar