There is no possibility to read/write to the extended CSD register of
MMC devices from a command. To avoid duplicated driver code, two driver
functions have to be public.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow drivers to build even if reset source support isn't built in.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allow drivers to build even if WD core isn't enabled.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HDMI support is not generally useful without EDID support.
Fixes:
In function `imx_hdmi_ioctl':
undefined reference to `edid_read_i2c'
undefined reference to `edid_to_display_timings'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
VPL uses the of_graph bindings, which are only available if OFTREE
support is compiled in.
Also fix the drivers using VPL to depend on OFTREE.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch is based on
commit 3d6f4a20cc287a8980c6186624834cf10a70752b
Author: David Miller <davem@davemloft.net>
Date: Thu Jul 24 23:38:31 2008 -0700
endian: Always evaluate arguments.
In barebox.git/drivers/usb/core/usb.c,
function usb_parse_config() we have had
le16_to_cpus(&(dev->config.wTotalLength));
which evaluates to "do { } while (0)" on little endian,
so struct usb_configuration field misuse will never
be discovered on little endian.
Therefore, always evaluate the arguments to nop endian
transformation operations.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
See the commit
commit 245069bcef
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jul 10 11:36:12 2014 +0200
USB: introduce usb_interface/usb_configuration structs
On little endian systems like ARM the le16_to_cpus() macro
is a no op, defined as:
#define le16_to_cpus __le16_to_cpus
#define __le16_to_cpus(x) do {} while (0)
So struct usb_configuration field misuse was discovered
on big-endian MIPS machine.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arm_ignore_data_abort can be set to nonzero to ignore data aborts. The
default should be not to ignore data aborts. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can now directly point to the partitions in the barebox,environment
binding. Convert some boards over to it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We could only point to partitions in the device tree by using
&norflash, "partname:barebox-environment". Allow to point to the
partition directly without having to parse the partition labels.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a device_node member to struct cdev and a function
to find a cdev by device_node.
This also removes the setting of cdev->dev->device_node in
the of partition parser. We must not set the device since it
may not refer to a partition but to a whole device with partitions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of writing one word to the txfifo and then wait until
one is received in the rxfifo we can write until the txfifos
are not full and read as long the rxfifos contain data. This
makes transfers for the m25p80 driver around 7 times faster
here.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are SoC specific ways to optimize transfers. Make the way free
to implement these by creating SoC specific transfer functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX SPI controller in version 2.3 can immediately start a transfer
when the txfifo is written to. In this mode we no longer have to trigger
the transfer with the xch bit which makes the code a bit simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enabling the watchdog before booting the kernel is a common usecase.
Add an option to the boot command and also add a global variable for
it to make it configurable easily.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The lock/unlock code is broken beyond repair.
First of all the algorithm doesn't work properly. SPI NOR flashes
can only protect a certain amount of blocks from the end of the device
which is incompatible to the protect(start,len) API we have. The
algorithm tries to be clever by doing protection only when it does
not protect unrelated blocks and unprotection only when it does not
unprotect unrelated blocks. This breaks for example when some code
protects the last blocks (which may contain the bootloader), then
protects the blocks before the last ones (which may contain the
environment). Then if we try to overwrite the bootloader this won't
work since it would unprotect the environment aswell, so the driver
will not unprotect anything resulting in a failed erase/write later.
Then the protection behaviour is different between different flashes.
Some have three protection bits, some have four. For some the smallest
protection are is 1/16 of the device, others have 1/256 or 1/64. Some
have a bit which selects the lower area instead of upper area for
protection. The position of this bit differs on different flashes.
This patch removes the lock code completely and always unprotects
the whole device. This way we can unprotect a device for writing to
it and never protect it again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make sure that the initcall only executes on the expected board.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This option looks like it takes the default password, but instead
it takes a filename of a file which contains the password encoded
with the selected password digest.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SHA1 is meant as a boolean option which is true when sha1 support is available.
This works because the providers (DIGEST_SHA1_GENERIC and DIGEST_SHA1_ARM) have
a 'select SHA1'. However, consumers like the sha1sum command do a 'select SHA1'
to enable SHA1 support. This of course does not work; selecting SHA1 will not
select any of the SHA1 providers.
This is broken for all digest consumers. We have to explicitly select a digest
provider, that is DIGEST_*_GENERIC to enable the corresponding digest.
This means now we will always have the generic digest in the binary, even
when an optimized one is enabled. There is no sane way in Kconfig to
"select provider for feature xy", so let's live with the overhead in the binary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- make some locally used functions static
- remove read_passwd which is unused
- some refactoring to make code pathes clearer
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to have the login functionality in the /env/bin/init script.
This is hard to review and it's too easy to break the login functionality
with changes to this script. Move the places to ask for a password to
C code where we have only a few places where we have to ask for a password.
Mainly these are run_shell() and the menutree command.
This patch introduces a login() function which will only return if the correct
password has been entered. Following calls will return immediately without
asking for a password again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Different devices may report the reset source with different levels
of certainty. For example a SoC may see a power-on reset, but this
may only be because an external PMIC has power cycled the SoC. This
means the PMIC knows the real reason better and thus the reset reason
from the PMIC should be preferred.
This patch introduces priorities for the reset_source to handle the
above scenario. Also add a of_get_reset_source_priority() function
to retrieve the desired priority from the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a dev and name member to struct watchdog which helps distinguishing
between different watchdogs. Also add some debugging aids.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Put watchdogs on a list to allow multiple watchdogs. Add a priority
field to be able to pick the highest priority watchdog.
This patch also provides a of_get_watchdog_priority() function to
allow configuring the watchdog priority from the device tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This replaces the reset_cpu() function which every SoC or board must
provide with registered handlers. This makes it possible to have multiple
reset functions for boards which have multiple ways to reset the machine.
Also boards which have no way at all to reset the machine no longer
have to provide a dummy reset_cpu() function.
The problem this solves is that some machines have external PMICs or
similar to reset the system which have to be preferred over the
internal SoC reset, because the PMIC can reset not only the SoC but also
the external devices.
To pick the right way to reset a machine each handler has a priority. The
default priority is 100 and all currently existing restart handlers are
registered with this priority. of_get_restart_priority() allows to retrieve
the priority from the device tree which makes it possible for boards to
give certain restart handlers a higher priority in order to use this one
instead of the default one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>