Fix misspellings of "persistent", including the renaming of a function
to "register_persistant_environment".
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add new chip revisions for the new tap-out TO1.5 (i.MX6Q/D) and TO1.2
(i.MX6DL/S)
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also make this download chapter note the next branch.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Note that I used "Appendix: " as text, because it looks like
python-sphinx doesn't know about appendices.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some phyFLEX-i.MX6 modules the call __barebox_arm_head() was not removed.
With this function the barebox does not start.
Signed-off-by: Christian Hemp <christian.hemp@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The functions are already in the sandbox, just the #defines are
missing.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When compiled for ARCH=sandbox, we get a compiler warning
if we don't include the needed header file as well.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a rewrite of the Documentation in reStructuredText format using
Sphinx as build system, see http://sphinx-doc.org/.
The documentation is built into static html pages with 'make docs'.
The pages can be found under Documentation/html after building.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove the barebox devicetree documentation. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the documentation texts in Documentation/. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enables all relevant errata workarounds for the
i.MX6 SoC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Header only implementation, so they can be pulled
into the individual SoC cpu init functions.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds pinctrl drivers for Marvell Dove and Kirkwood SoCs based
on a common driver stub. This design is based on the corresponding
Linux driver and should ease additional drivers for Marvell Armada
SoCs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have 'select COMMON_CLK' so 'select HAVE_CLK'
is redundant.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell MVEBU SoC id and revision can be read out from any PCIe port
registers. This adds corresponding code to read out id and revision
and provides a helper function for drivers to use it.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell MVEBU DT files contain some nodes mapped to PCI address space,
add the translator Kconfig to be able to iomap those node's addresses.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DT PCI address translation needs a special handling. This imports
the corresponding translator into of/address.c but makes it selectable
through Kconfig. Compared to the Linux version, we don't check for
struct device_node's type which does not exist on Barebox but directly
for device_type property set to "pci".
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also we can enable m24c02 eeprom chip in dts-file e.g.
&i2c0 {
status = "okay";
eeprom: m24c02@50 {
compatible = "spd";
reg = <0x50>;
};
};
Alas! qemu mips malta spd m24c02 eeprom chip emulation is not perfect:
the block read operation does not work properly.
Here is an example.
If we read eeprom content byte-by-byte then there is no problem:
barebox:/ for i in 0x08 0x09 0x0a 0x0b 0x0c 0x0d 0x0e 0x0f ;
> do i2c_read -b 0 -a 0x50 -r $i -c 1 ; done
0x01
0x75
0x54
0x00
0x82
0x08
0x00
0x01
Compare this output with content of qemu.git/hw/mips/mips_malta.c:
static eeprom24c0x_t spd_eeprom = {
.contents = {
...
/* 00000008: */ 0x01,0x75,0x54,0x00,0x82,0x08,0x00,0x01,
But if we read several bytes at once the we have data corruption:
barebox:/ i2c_read -b 0 -a 0x50 -r 0x8 -c 8
0x01 0xff 0xff 0xff 0xff 0xff 0xff 0xff
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds initial support for Marvell PHY specific drivers. As a first
PHY, a driver for MV88E1121R is ported over from Linux.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RGMII PHY modes include delayed interface modes RGMII_ID, RGMII_TXID,
and RGMII_RXID. Also check for those modes when setup RGMII mode in
port serial ctrl register.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Orion ethernet IP originally is multi-port capable, but SoCs
using the IP usually have multiple single-port controllers built in.
Currently, orion-gbe driver registers each port device with a constant
name, which causes a name conflict with multiple controller instances.
This patch uniquifies port device name generation by prepending
controller's base register address to resolve the name conflict.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ePAPR defines phy-connection-type as standard property for PHY interface
between Ethernet device and PHY device. Add corresponding property check
to of_get_phy_mode.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver provides common support for accessing
the CBUS FPGA I2C lines through the gpio library.
Additional i2c bitbang driver must be enabled
in order to use the functionality of the i2c controller.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Robert P. J. Day
Christian Hemp
Holger Schurig
Antony Pavlov
Christian Hemp
Sascha Hauer
Jan Luebbe
Lucas Stach
Sebastian Hesselbarth