uncompress_buf is used each time uncompress is called, so
make sure it is initialized correctly so that we do not
call free() on an already free pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DOS partitions are the only partitions we handle at the moment
and without it most MMC/SD enabled configs are useless, so make
it default yes. Also, use 'depends on' instead of 'if'
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Juergen Beisert <jbe@pengutronix.de>
We do not have any command line parser support for bootm anymore.
Disable it for now to at least be able to compile it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since fprintf and console_puts now return the number of
character written the prototypes have changes. We forgot
to fix console_simple which now fails to compile with:
common/console_simple.c:48:6: error: conflicting types for 'fprintf'
include/stdio.h:57:5: note: previous declaration of 'fprintf' was here
common/console_simple.c:67:6: error: conflicting types for 'console_puts'
include/stdio.h:20:5: note: previous declaration of 'console_puts' was here
Fix this by returning the proper numbers of characters written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to execute a program of the host from barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to check which sd card slot we use. The registered mmc_id is the
the correct parameter for this.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for the ohci-at91 to work.
In u-boot this function was transmitting a cmdlen of 12, by the initial
commit. There are similar functions like usb_request_sense,
usb_read_capacity nearby which also transmit 12 byte per default on
u-boot, which probably also need a fix.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as example today if the timeout happened we can not probe the SD card again
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As USB can have its cable plugged out anytime, make the
serial gadget reliable in case of unplugging :
- unregister the gadget_serial provided console
- don't stay forever in the read loop if connection was cut
This behaviour relies on correct implementation of
usb_gadget_poll(), which should return an error if the USB
cable was removed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The serial gadget can only work if the serial function is
properly connected on USB trigger (ie. on SET_CONFIGURATION
or SET_INTERFACE USB message triggering set_alt() in
composite.c).
Make this connection and handle also the disconnection in
f_serial.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the generic gadget polling function instead of the
specific fsl function. This is a fix from a leftover in
gadget development.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt mainline kernel pxa27x_udc driver to barebox :
- remove function header comments as they are in mainline
- test it with serial gadget
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some console are transient, like the USB connected serial
console which should be removed when the USB connection is
severed.
Enable console removal for such devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dlmalloc seems to work more efficient with this chunk size.
Copying a bigger file (3MB) takes 271ms vs. 125ms on a i.MX27
board. Even bigger chunk sizes do not further improve performance.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If parameter -v without a crc is used, you got a notice but the crc is
calculated and exit status is 0.
With wrong parameters we should quite with COMMAND_ERROR_USAGE.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cramfs does not compile since we updated zlib to the kernel
version. Fix this by using the kernel version of uncompress.c
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>