Introduce getenv_ip_dns to be able to do not do the resolv when using it in
resolv for the nameserver (Do not loop).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added ULPI detection function.
Same function from isp1504 driver removed.
Used implementation from Linux kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These registers can be used for any standart ULPI chip,
not only for ISP1504.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
every struct fs_device_d contains a struct mtab_entry, so they
have a 1:1 relationship. Instead of having to use container_of
to get from a struct mtab_entry to a struct fs_device_d we can
better embed the members of struct mtab_entry into struct fs_device_d
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
execute_command is the single point where commands are executed and thus a new
getopt context is needed. currently we call getopt_reset here to reset the
context. This breaks though when a command tries to run a command itself by
calling execute_command or run_command. In this case we have to store the
context and restore it afterwards. The same is necessary in builtin_getopt.
Currently noone does this so this one shouldn't fix a bug, but merely allows
us to do such things later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By putting the fs devices/drivers on a bus on its own we can hook
into the bus remove function to cleanup the fs device. This way
we can unmount a device by simply unregistering the device which
is useful for for example USB mass storage devices. These can now
unregister the assoiated filesystems by unregistering their child
devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We store the fs devices in a list only because we want to
check if the fs driver needs a backingstore or not. The
driver will bail out anyway if it needs a backingstore and
doesn't find one. So we can remove this check and thus remove
the list of fs devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make the code a bit easier to read. Also, do not allow
to umount / when something else is mounted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add variables to control the duty_ns and period_ns of PWM
chips. When these variables are set, a call to either
pwm_enable() or pwm_config() is performed to enforce the
setup values.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds framework support for PWM (pulse width modulation)
devices.
A new pwm can be registered from a hardware driver using
pwmchip_add(). It can then be requested from a client driver using
pwm_request(). A string is used as a unique identifier for the
pwms. It should usually be initialized by the hardware drivers
using dev_name(dev). The client API is the same as currently
in the Linux Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current caching layer only has a single buffer for
writing and reading. The FAT driver often accesses the
fat and then data again, which currently can't be cached.
Reimplement this with a list of cached chunks. The number
of chunks and their sizes are currently hardcoded, but
that could be easily made configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we test the cards capabilities for being 8bit capable.
This does not work since noone ever sets this bit. Unfortunately
there is no bit to test 8bit capability, so we introduce a patch
from the kernel which puts the mmc card into 8bit mode and tests
whether it can succesfully read the ext_csd in this mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mci layer currently passes around a struct device_d for
its internal use. Apart from being confusing this drops
typesafety for no good reason. Instead, pass around a struct
mci.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we'll need more arguments to set_ios over time put them
in a struct mci_ios like the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least ARM allows us to dump the stack, but we currently
have no prototype for this. Add a dump_stack prototype and
provide a static inline function for architectures without
stack dump support. Also, call dump_stack() in panic() to
provide more information in the case of a panic.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
kfifo currently only works with dynamically allocated fifos.
Change the currently unused kfifo_init to take a preallocated
fifo. This allows for statically initialized fifos.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wolfram Sang
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan
Sascha Hauer
Jan Weitzel
Eric Bénard
Robert Jarzmik