When a memory bank is already registered, return an error code
instead of throwing a bug. This can happen if a board has registered
a memory bank and the same bank is then probed from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not blit the surface everytime we write an image
As we want to able to render multiple image this will cause 1 blit per image;
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To open, memmap, get the fb_info and if needed allocate the offscreen buffer
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of passing hundreds of parameter, just pass the right structure.
struct screen represent the screen with a without double buffering.
struct surface represent the part of the screen we want to render.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed if the image is bigger than the screen.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can pass -1 for auto detect
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds barebox common clk support loosely based on the Kernel common
clk support. differences are:
- barebox does not need prepare/unprepare
- no parent rate propagation for set_rate
- struct clk is not really encapsulated from the drivers
Along with the clk support we have support for some basic clk building
blocks:
- clk-fixed
- clk-fixed-factor
- clk-mux
- clk-divider
clk-fixed and clk-fixed-factor are completely generic, clk-mux and clk-divider
are currently the way i.MX muxes/dividers are implemented.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most clock/device associations can be done based on the physical
base address of the corresponding device. So instead of depending
on string matching add an optional possibility to associate a clock
lookups with physical addresses. This also has the advantage that
the lookups for devicetree based devices can be identical to the
platform based devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also pass flags using platform_data and remove useless casts from void*.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This is need for oftree device probing
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow reduce the number of driver and device to search on.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We may have some disk with MBR as a first sector. In this case, the
current FAT check returns an error. However, the FAT sector exist and
the MBR can tell us where it is.
This patch add to file_name_detect_type function the ability to find
the FAT boot sector on the first sector of the first partition in case
it is not on sector 0.
It also introduce is_fat_or_mbr to check if a buffer is a FAT boot
or MBR sector
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is common for drivers to handle multiple similar devices. On
Linux the driver can distinguish between the devices using the
platform_device_id mechanism. Introduce the same for barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Printing device context normally should be "driver instance:",
but instead we printed the device name twice. This patch fixes
this and as a bonus makes the binary a bit smaller. Instead of
a '@' between driver and instance this function now prints a
whitespace which is a bit more like Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a I2C bus on which the I2C devices and drivers register.
This makes it cleaner as I2C devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a SPI bus on which the SPI devices and drivers register.
This makes it cleaner as SPI devices won't accidently end up probed by
a platform_device driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This patch sync the image type list with the kernel in order to add
openrisc support.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to render rgba image with or without hw support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to support bmp and png
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can add other format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>