c524f74d5b
commands: NET_DHCP -> CMD_DHCP
...
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-05-14 10:03:49 +02:00
5bd055b660
commands: NET_PING -> CMD_PING
...
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-05-14 10:03:48 +02:00
b1fccec3ee
highbank: add power off support
...
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-18 10:58:54 +01:00
d8da8c23e9
highbank: use the provided dtb by the firmware to probe barebox device and mem size
...
the dtb is at 0x1000
if no dtb present use C code device
keep in C the timer/gpio/uart
have a nice tree
barebox 2013.02.0-00294-g6802ddf #124 Wed Feb 13 02:31:01 CST 2013
Board: Calxeda Highbank
memory: ram0: 0xff900000@0x0
highbank: dtb probed memory size
registered netconsole as cs1
malloc space: 0x03500000 -> 0x03efffff (size 10 MiB)
Open /dev/env0 No such file or directory
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
ahci ffe08000.sata: port 0: SATA link ok
ahci ffe08000.sata: port 0: Spinning up device...
ahci ffe08000.sata: port 0: ok.
ahci ffe08000.sata: registered /dev/ata0
eth0: got preset MAC address: 52:54:00:12:34:56
eth1: got preset MAC address: 52:54:00:12:34:57
Hit any key to stop autoboot: 3
[barebox@Calxeda Highbank]:/
# devinfo
devices:
`---- platform
`---- mem0
`---- 0x00000000-0x3fffffff: /dev/ram0
`---- 0x00001000-0x00010fff: /dev/dtb
`---- mem1
`---- 0x00000000-0x000051af: /dev/defaultenv
`---- mem2
`---- 0x00000000-0xfffffffe: /dev/mem
`---- cs1
`---- fff10600.timer
`---- fff10620.watchdog
`---- fff11000.interrupt-controller
`---- l2-cache
`---- ffe08000.sata
`---- 0x00000000-0x3fffffff: /dev/ata0
`---- 0x00100000-0x014fffff: /dev/ata0.0
`---- 0x01500000-0x3fffffff: /dev/ata0.1
`---- ffe0e000.sdhci
`---- fff00000.memory-controller
`---- mem3
`---- fff3c000.sregs
`---- fff3c200.sregs
`---- fff50000.ethernet
`---- eth0
`---- fff51000.ethernet
`---- eth1
`---- amba
`---- sp804
`---- uart-pl011
`---- cs0
`---- fff30000.gpio
`---- fff31000.gpio
`---- fff32000.gpio
`---- fff33000.gpio
`---- fff35000.rtc
`---- fs
`---- ramfs0
`---- devfs0
`---- net
`---- global
drivers:
uart-pl011
sp804
pl061_gpio
ramfs
devfs
tftp
hb-xgmac
ahci
mem
[barebox@Calxeda Highbank]:/
#
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-14 13:09:10 +01:00
f6b23059c9
arm: add highbank support
...
currently only tested under qemu
qemu-system-arm -M highbank -nographic -m 4089 -kernel build/highbank/arch/arm/pbl/zbarebox -tftp "." -drive id=disk,if=ide,file=disk.img -device ide-drive,drive=disk,bus=ide.0
with:
- timer (AMBA SP804)
- uart (AMBA PL011)
- gpio (AMBA PL061)
- ahci
- net (XGMAC)
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-14 13:09:09 +01:00
Holger Schurig
Jean-Christophe PLAGNIOL-VILLARD