b5338b23a1
Merge branch 'mpc85xx'
2006-08-29 08:47:20 -05:00
2f15776ccc
Fixed an OF-tree off-by-one bug when adding a new property name.
...
This bug will cause the kernel booting to pause a long time.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
2006-08-29 08:11:34 -05:00
5e4c24bcb3
Merge branch 'mpc86xx'
2006-08-23 10:40:37 -05:00
4782ac80b0
Add AHCI support to u-boot
...
Add AHCI support in u-boot, enable the sata disk controllers which
following the AHCI protocol.
Signed-off-by:Jason Jin<jason.jin@freescale.com>
2006-08-23 10:39:01 -05:00
4b7576fb80
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-08-22 10:17:59 -05:00
5de62c47a8
Fix disable_of booting
...
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-08-22 09:31:59 -05:00
87a449c8ac
Support for FDT in uImage format, error when using FDT from flash
...
Signed-off-by: Matthew McClintock <msm@freescale.com>
2006-08-22 09:23:55 -05:00
75c299c383
Unlock cache before kernel starts up for MPC86xx
2006-08-17 11:02:12 -05:00
1c8f6d8fb0
Unlock cache before kernel starts up for MPC86xx
2006-08-17 11:00:27 -05:00
c72d9c5285
Merge with /home/sr/git/u-boot/denx
2006-08-13 02:25:32 +02:00
92c427b189
Merge branch 'mpc85xx'
...
Conflicts:
include/ft_build.h
include/pci.h
Resolved, though.
2006-08-09 14:41:17 -05:00
5498d90312
* Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006
2006-08-09 13:50:18 -05:00
0267768edd
* Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006
2006-08-09 13:50:11 -05:00
281f69ede2
Merge branch 'wd'
2006-08-09 13:36:54 -05:00
6587f7e1e9
Merge with /home/tur/proj/usb_sticks/u-boot
2006-08-07 20:28:05 +02:00
d8f961bbda
Fix control-c handing in CONFIG_CMDLINE_EDITING
...
Properly pass break code back from readline.
Patch by Roger Blofeld, 31 Jul 2006
2006-08-07 15:08:44 +02:00
e335496a32
Change "mii info" to not print an error upon missing PHY at address
...
Patch by Stefan Roese, 07 Aug 2006
2006-08-07 14:29:04 +02:00
e51aae3829
Prevent USB commands from working when USB is stopped.
2006-08-03 23:20:13 +02:00
7455af41d1
Add rudimentary handling of alternate settings of USB interfaces - to fix
...
problems with some USB storage devices. Some code readability improvements.
2006-08-02 00:54:18 +02:00
3ca9122fec
Fix CONFIG_CMDLINE_EDITING implementation
...
Patch by Stefan Roese, 27 Jul 2006
2006-07-27 16:11:19 +02:00
966083e95f
More code cleanup
2006-07-21 15:24:56 +02:00
b9365a26a1
Code cleanup
2006-07-21 11:56:05 +02:00
029b6dc77c
Make code better readable.
...
Patch by Ladislav Michl, 14 Sep 2005
2006-07-21 11:37:40 +02:00
dd9f06f0d5
Minor code cleanup.
2006-07-21 11:34:34 +02:00
501090aaa6
Add readline cmdline-editing extension
...
Patch by JinHua Luo, 01 Sep 2005
2006-07-21 11:33:45 +02:00
311d802790
Check argument count in "mii" command.
...
Problem pointed out by Andrew Dyer, 13 Jun 2005
2006-07-21 11:20:46 +02:00
45a212c4d7
Add support for new TQM5200 revisions
...
- Support for TQM5200S (short version without graphic controller)
- Support for modules with 'N' type S29GL128N Spansion flashes
(requires changes to flash layout)
- Support for MPC5200B cpu (mostly support for second SDRAM bank)
2006-07-19 17:52:30 +02:00
0f2859689a
Merge branch 'mpc86xx'
2006-07-13 10:58:28 -05:00
bea3f28d28
Add support for reading and writing mac addresses to or from ID EEPROM.
...
Added code for reading and writing Mac addresses to/from ID EEPROM(0x57).
With attached patch, we can use command "mac/mac read/mac save/"
to read and write EEPROM under u-boot prompt.
U-boot will calculate the checksum of EEPROM while bootup,
if it is right, then u-boot will check whether the mac address
of eTSEC0/1/2/3 is availalbe (non-zero).
If there is mac address availabe in EEPROM, u-boot will use it,
otherewise, u-boot will use the mac address defined in
MPC8641HPCN.h. This matches the requirement to set unique mac address
for each TSEC port.
Signed-off-by: Haiying Wang <haiying.wang@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
2006-07-13 10:57:37 -05:00
fcb28e7634
Fixed initrd issue by define big RAM
...
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-13 10:35:10 -05:00
f88a0ae6d7
Fix problems with SanDisk Corporation Cruzer Micro USB memory stick.
2006-07-13 15:32:16 +02:00
9d40799551
Major PCMCIA Cleanup to make code better readable and maintainable.
...
Notes:
- Board-dependend code for RPXLITE and RPXCLASSIC-based boards
placed to the drivers/rpx_pmcia.c file to avoid duplication.
Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c).
- drivers/i82365.c has been split into two parts located at
board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are
the only boards using CONFIG_82365).
- Changes were tested for clean build and *very* *few* boards.
2006-07-10 23:07:28 +02:00
de07a6a59c
Merge branch 'mpc86xx'
2006-07-07 10:03:07 -05:00
e6cd2a1785
We made a u-boot patch to fix the hang up issue
...
when booting filesystem from ramdisk.
Signed-off-by:Jason Jin <Jason.jin@freescale.com>
2006-07-07 10:02:15 -05:00
f6e5739a68
Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 18:19:42 +02:00
6c5879f380
Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30 16:30:46 +02:00
0c32d96ddd
Add support for gth2 board
...
Patch by Thomas Lange, Aug 11 2005
2006-06-16 17:32:31 +02:00
c12cffc543
Add support for CONFIG_SERIAL_MULTI on MPC5xxx
...
Patch by Martin Krause, 8 Jun 2006
This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.
2006-06-16 17:04:45 +02:00
a941b83241
Merge branch 'mpc86xx'
2006-06-07 08:49:46 -05:00
72ed528a94
Merge branch 'master' of http://www.denx.de/git/u-boot
2006-06-07 08:49:38 -05:00
ba94a1bba3
* Update Intel IXP4xx support
...
- Add IXP4xx NPE ethernet MAC support
- Add support for Intel IXDPG425 board
- Add support for Prodrive PDNB3 board
- Add IRQ support
Patch by Stefan Roese, 23 May 2006
[This patch does not include cpu/ixp/npe/IxNpeMicrocode.c which still
sufferes from licensing issues. Blame Intel.]
2006-05-30 15:56:48 +02:00
3033ebb20f
Allow args on reset command.
...
Signed-off-by: Jon Loeliger <jdl@jdl.com>
2006-05-26 10:01:16 -05:00
6516525083
Fix PCMCIA support on virtlab2
2006-05-15 13:52:51 +02:00
319b9a5467
Cleanup compile warning.
2006-05-12 16:32:32 +02:00
8cba090c58
Add support for VirtLab2 board
...
(needed because of differences in the PCMCIA hardware).
2006-05-12 16:15:46 +02:00
846c2d4a0e
Merge branch 'mpc86xx'
2006-05-10 09:43:21 -05:00
6cfea33477
Remove unneeded INIT_RAM_LOCK cache twiddling.
...
Correctly tracks r29 as global data pointer now.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
2006-05-10 09:38:06 -05:00
f90a39213e
Fix compile warnings in common/xyzModem.c
...
Patch by Stefan Roese, 10 May 2006
2006-05-10 15:01:40 +02:00
a67255363a
Merge branch 'mpc86xx'
2006-05-09 08:33:11 -05:00
1cfefe8cb6
Merge with /home/m8/git/u-boot
2006-05-09 13:46:55 +02:00
Jon Loeliger
Zhang Wei
Jin Zhengxiong
Matthew McClintock
Haiying Wang
Wolfgang Denk
Stefan Roese
Bartlomiej Sieka
Jin Zhengxiong
Marian Balakowicz
Wolfgang Denk
Wolfgang Denk