This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This define allows to overwrite DMA_PIO_WORDS with an architecture
specific value. Since this is unused and not clean anyway remove
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The level of pr_err and pr_warning were interchanged.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.
Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).
The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These functions allow to manipulate the "status" property of
devicenodes effectively enabling/disabling devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for LZ4 decompression in the Linux Kernel.
LZ4 Decompression APIs for kernel are based on LZ4 implementation
by Yann Collet.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cdev_open() opens a cdev by name. This introduces cdev_do_open which
allows to open a cdev when the cdev is already found by other means.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
currently most partition cdevs have the name <devname>.<partname>
This makes it hard to find a partition by <partname>. This introduces
a partname field in struct cdev so that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change will allow reuse this function for other buses.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_free is misleading about the actual purpose of the function. There is
already a of_create_node counterpart, so rename of_free to of_create_node
and update all users accordingly.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct device_node has its own resources and a pointer to associated
device_d. With recent platform related OF code, we can convert the
only user of it and remove those pointers from struct device_node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This creates a Linux OF API compatible counterpart of of_get_named_gpio_flags.
Existing of_get_named_gpio is converted to a static inline function, which is
in the corresponding of_gpio.h include. While at it, drivers/of/gpio.c is
also renamed to drivers/of/of_gpio.c to follow the of_ prefix naming scheme.
The new include is also added to existing users of of_get_named_gpio.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports some bus and device related functions from Linux OF API
with some modifcations for Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OF_ROOT_NODE_* defines should not be used outside of base.c. Move them
to drivers/of/base.c to ensure they will not be used elsewhere.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts existing of_translate_address to recently added API. In
contrast to existing behavior, the new function honors ranges properties
properly. It now allows reg properties to be set as offset with respect
to the correspoding parent node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports drivers/of/address.c from Linux with some minor modifications.
of_translate_address is not yet enabled and PCI and ISA related bus translations
have not been imported. Also, a corresponding include header is created with
prototypes and non-OF function stubs.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>