remap_cache currently does not work, so enabling the MMU in the
PBL currently does not make sense. Disable it for now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The following missed to add a jump to board_init_lowlevel_return for the
phycard pca100 board:
| commit 244198ea8b
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sun Jul 8 18:30:42 2012 +0200
|
| ARM boards: Use _text rather than TEXT_BASE
|
| With compressed image support TEXT_BASE will become the base
| address of the uncompressed image. What the boards want instead
| is the base address of the decompressor code or, if not compressed,
| the base address of the uncompressed image. Use _text which is
| the correct one for both cases.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes it by adding the jump. Also imx_nand_load_image is directly
called from lowlevel_init.S which fixes compilation with pbl support
enabled.
Tested with both compression enabled and disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa10036 board file were missing the length parameter when adding
devices. This made barebox crash early in the boot, in the mxs-mci
driver.
Provide the resources lengths in a consistent format.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will crash when use registered bus with device registered to it.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get rid of the register definitions in the SoC header files.
platform_device_id is used to distinguish between gpt types.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When the i.MX28 boots from USB, the ROM code sets this bit. When
after a reset the ROM code detects that this bit is set it will
boot from USB again. This means that if we boot once from USB the
chip will continue to boot from USB until the next power cycle.
To prevent this (and boot from the configured bootsource instead)
clear this bit here. This bit is not documented in the datasheets,
it was figured out the hard way. Whether this is the same on i.MX23
is currently not known.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following warnings:
arch/arm/boards/freescale-mx6-sabrelite/board.c: In function 'sabrelite_ehci_init':
arch/arm/boards/freescale-mx6-sabrelite/board.c:265:2: warning: implicit declaration of function 'imx6_usb_phy1_disable_oc' [-Wimplicit-function-declaration]
arch/arm/boards/freescale-mx6-sabrelite/board.c:266:2: warning: implicit declaration of function 'imx6_usb_phy1_enable' [-Wimplicit-function-declaration]
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mips currently uses local_irq_save and local_irq_restore
which are not defined. Drop them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Use 512k NAND Partion for barebox in enviroment and boards code
pcm049: use 4MB for kernel
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As we may try to get it from the env.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allow to detect the amba device and use the right driver for it at
runtime.
With pl011 amba support (ARM & ST Variant)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=m4nO
-----END PGP SIGNATURE-----
Merge tag 'amba_bus' of git://git.jcrosoft.org/barebox into for-next/amba
arm: Introduce ARM AMBA bus
This allow to detect the amba device and use the right driver for it at
runtime.
With pl011 amba support (ARM & ST Variant)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For some reason, the mxs-boards missed some length parameters when adding
devices. This made reading from ocotp crash in the current version.
Provide missing lengths, use a consistent format and fix the length for
the LCDIF.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx23-olinuxino is a board designed by Olimex.
It has the following features:
- Freescale iMX233 ARM926J processor at 454MHz
-64 MB RAM
-SD-card connector
-TV PAL/NTSC video output
-2 USB High Speed Hosts
-Ethernet 100 Mbit
-Stereo Audio Input
-Stereo Headphones Audio Output
More information at:
http://www.olimex.com/dev/imx233-olinuxino-maxi.html
Signed-off-by: Fadil Berisha <f.koliqi@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
vicencb@gmail.com
Jean-Christophe PLAGNIOL-VILLARD
Jan Luebbe
Maxime Ripard
Teresa Gámez
Franck Jullien
Steffen Trumtrar
Jan Weitzel
Renaud Barbier
Wolfram Sang
Fadil Berisha