This imports of_get_parent, of_get_next_available_child, and
of_get_child_by_name and corresponding helpers from Linux OF API.
of_get_next_child is not imported but implemented as list iterator
instead. Also, of_get_child_count and of_get_available_child_count
are introduced.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_node_with_property and corresponding helpers
from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_matching_node_and_match and corresponding helpers
from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_compatible_node and corresponding for_each_compatible_node
helper from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This imports of_find_node_by_name and corresponding for_each_node_by_name
helper from Linux OF API.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
According to ePAPR 1.1 spec, device tree nodes status can be either
"okay", "disabled", "fail", or "fail-sss". Barebox already has a function
to check for "disabled" nodes, while Linux checks for "okay" or "ok".
To synchronize Barebox and Linux OF APIs, rename of_node_disabled to
of_device_is_available and check for "okay" instead of "disabled" as it
also makes "fail"ed devices unavailable.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Barebox of_find_node_by_path requires a node to be passed as start node
to start searching. Linux OF API does not pass this node and no current
user of it in barebox is passing anything else than the root node.
Therefore, we rename current function to of_find_node_by_path_from and
introduce a Linux OF API compatible of_find_node_by_path that always
passes the current root_node. Also, all current users of that function
are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Barebox compares compatible, node names, and property names with strcmp.
Linux by default compares compatible and node names with strcasecmp. To
avoid inconsitencies between Barebox and Linux dts files, we convert to
these default string compare functions.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Current implementation of of_property_write_u32 does free old property
values and allocates new values depending on the size passed. While
copying the new values to the property, corresponding length is not
set. This makes of_property_write_u32 set the length of the new property
values and also adds a API header describing the function.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
of_match_node checks for compatiblity between a set of matches and a
node. Neither the matches nor node pointer are checked for validity.
This adds the required checks to of_match_node.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
ppc does not implement these, so remove the prototypes and use
the ones from include/linux/string.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The tran_speed field as decoded from csd is valid in most cases,
so use it to determine the maximum clock we can support. It is
not valid though for MMC highspeed cards, in this case the
csd contains invalid values and we have to set tran_speed explicitly
to the maximum speed. As the values passed into mci_set_clock are
now based on tran_speed we no longer have to limit the rate to
tran_speed in mci_set_clock.
The (intended) effect of this patch is that highspeed MMC cards are
no longer limited to non highspeed rates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have board specific special clock setups. These are now
done in the SoC specific clock drivers.
It is assumed that most board specific clock setup is done based on
copy/paste from U-Boot. The generalized clock setup differs from
some boards:
- ioclk are adjusted to 480MHz
- ssp clocks are adjusted to 96MHz
- enet out clock is enabled
Some boards adjusted the ioclk to 320MHz and the ssp clock to 160MHz.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS needs some special MXS specific clock types:
- pll
- ref (fractional divider)
- busy divider (divider with additional busy bit to poll on a rate change)
- lcdif (Combined clock out of a fractional divider, a divider and a gate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On MXS we need to poll the busy bit when changing a clock rate, but only
when the parent clocks are enabled. This exposes the already present
function clk_is_enabled which is suitable for this job.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some tftp servers (for example netkit-tftp) do not pass the filesize.
Add a workaround for read_file which reads the file into a temporary
file which then is copied to a buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Someone calling menu_show might only be interested in the entry the user
selected without having something in the action callback. Make it optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gotoXY has the argument order (y, x). Change this so that usage of this
function feels more natural.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
More than 9 menu entries in are single menu are not aligned anymore, like
this:
8 entry8
9 entry9
10 entry10
Use %2d in the printf format specifier to align more than 9 entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get persistent devicenames under /dev/ allow to set the
devicename from the driver instead of using "ata" unconditionally.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For OMAP4460 omap4_scale_vcores must set the voltage according to mpu freq.
OPP100 700MHz 1210mV
OPPTB 920MHz 1320mV
OPPNT 1200MHz 1380mV
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove Shinya Kuribayashi's copyright on the ADR macro
in start-pbl.S as we don't define this macro in
this file or even use it where.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The generated label usage make possible
to use the ADR macro many times.
If we don't use a generated label and we try
to use the ADR macro second time then we get
Error: symbol `_pc' is already defined
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have the LONGSIZE macro definition in <asm/asm.h>.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>