I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox used to have its own include/dt-bindings with files copied
from the corresponding kernel files. Use upstream dt-bindings directly
instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds CBUS UART dts support;
also it adds the necessary macros for DEBUG_LL.
qemu-malta supports three serial interfaces:
* two ports are provided by the FDC37M817
Super I/O; this chip is connected via LPC bus
to Intel 82371EB (PIIX4E) South Bridge;
* the third serial port is provided by
the discrete TI 16C550C (CBUS UART);
this chip is connected via CBUS directly
to the board's GT64120 North Bridge.
See Malta User's Manual (MD00048) for details.
CBUS UART Instructions for use:
1. Enable CONFIG_CONSOLE_ACTIVATE_ALL in .config
(or disable uart0 in dts) and compile barebox;
2. run qemu:
qemu-system-mips -nographic -nodefaults \
-monitor null -M malta -m 256 \
-serial null -serial null -serial stdio \
-bios barebox-flash-image
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This board support code can be used for TP-LINK WR703 too.
TP-LINK WR703 is very similar to TP-LINK MR3020, there are
some non-essential differences:
* WR703 is smaller and cheaper;
* WR703 has only one led, but MR3020 has five leds;
* MR3020 uses mini-USB connector, WR703 uses micro-USB connector.
See https://forum.openwrt.org/viewtopic.php?id=45159 for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the mach-ath79 name for compatibility with linux kernel.
Signed-off-by: Du Huanpeng <u74147@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is based on
commit fa1a406f72
Author: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Date: Sat Nov 9 14:24:18 2013 +0100
ARM: lib: add BAREBOX_CLK_TABLE to linker script
This adds an .oftables section right before .dtb section with
BAREBOX_CLK_TABLE to ARM linker script.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Here is my error log:
CC common/startup.o
In file included from arch/mips/mach-xburst/include/mach/debug_ll.h:25,
from include/debug_ll.h:31,
from common/startup.c:36:
arch/mips/include/asm/debug_ll_ns16550.h: In function 'PUTC_LL':
arch/mips/include/asm/debug_ll_ns16550.h:62: error: 'DEBUG_LL_UART_ADDR' undeclared (first use in this function)
arch/mips/include/asm/debug_ll_ns16550.h:62: error: (Each undeclared identifier is reported only once
arch/mips/include/asm/debug_ll_ns16550.h:62: error: for each function it appears in.)
make[1]: *** [common/startup.o] Error 1
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All MIPS board use <vendor>-<model> name template save Ritmix RZX-50.
This commit fixes this inconsistency.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use dts for serial port initialization,
so we have no need in mach-xburst/serial.c anymore.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is based on this linux commit:
commit 2fa36399e63c911134f28b6878aada9b395c4209
Author: Kelvin Cheung <keguang.zhang@gmail.com>
Date: Wed Jun 20 20:05:32 2012 +0100
MIPS: Add CPU support for Loongson1B
Loongson 1B is a 32-bit SoC designed by Institute of Computing Technology
(ICT) and the Chinese Academy of Sciences (CAS), which implements the
MIPS32 release 2 instruction set.
[ralf@linux-mips.org: But which is not strictly a MIPS32 compliant device
which also is why it identifies itself with the Legacy Vendor ID in the
PrID register. When applying the patch I shoveled some code around to
keep things in alphabetical order and avoid forward declarations.]
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>