The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This board support code can be used for TP-LINK WR703 too.
TP-LINK WR703 is very similar to TP-LINK MR3020, there are
some non-essential differences:
* WR703 is smaller and cheaper;
* WR703 has only one led, but MR3020 has five leds;
* MR3020 uses mini-USB connector, WR703 uses micro-USB connector.
See https://forum.openwrt.org/viewtopic.php?id=45159 for details.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All MIPS board use <vendor>-<model> name template save Ritmix RZX-50.
This commit fixes this inconsistency.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
GXemul is another MIPS emulator with Malta board support.
As opposed to qemu GXemul supports only fixed GT64120
YAMON-compatible PCI mapping.
As now barebox uses YAMON-style mapping we can
use GXemul for barebox run.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are some reasons for using YAMON-style memory map:
* we can run Linux kernel from barebox;
* we can use GXemul for running barebox.
YAMON-style GT64120 memory map make move UART to the new position.
The files gt64120.h and mach-gt64120.h are imported from Linux.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On MIPS Technologies boards 0x1fc00010 address
is reserved for BoardID. The hardware or emulator
intercepts accesses to this address and we can't use
this address for storing code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On 8 February 2013 MIPS Technologies was acquired
by Imagination Technologies. Now the http://www.mips.com/ site
is redirected to http://www.imgtec.com/, the Malta development
board page is unreachable.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if E0 flag is not set, sdram is defenetly not configured.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ingenic JZ4755 SoC (JZ4750D family) has three UARTs.
So we can give to the user choose which one of them
to use for low level debug (debug_ll) output.
Also this commit adapts the only JZ4755 board
(Ritmix RZX50) for using the new debug_ll port
selection.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Trivial pbl support has no cpu specific setup.
We will add cache setup routines in the future.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the commit 40492a0c13
(MIPS: add common header file for DEBUG_LL via NS16550)
introduced common DEBUG_LL via NS16550 for MIPS
(see file arch/mips/include/debug_ll_ns16550.h).
In the commit 1cbe2b2c00
(MIPS: XBurst: add Ritmix RZX-50 board support)
the file debug_ll_ns16550.h used in
the file arch/mips/mach-xburst/include/mach/debug_ll.h.
Usage looks like this:
------------------------------------------------
+#ifdef CONFIG_BOARD_RZX50
+#include <mach/debug_ll_jz4755.h>
+#endif
+
+#include <debug_ll_ns16550.h>
------------------------------------------------
So after adding another board (e.g. A320) we will have something like this:
------------------------------------------------
#ifdef CONFIG_BOARD_RZX50
#include <mach/debug_ll_jz4755.h>
#endif
+#ifdef CONFIG_BOARD_A320
+#include <mach/debug_ll_jz4740.h>
+#endif
#include <debug_ll_ns16550.h>
------------------------------------------------
This approach has disadvantage:
* the files mach/debug_ll_jz4740.h and mach/debug_ll_jz4755.h
(they go to arch/mips/arch-xburst) are __BOARD-SPECIFIC__
(not SOC- or mach-specific!); The file mach-xburst/include/mach/debug_ll.h
is outside board directory, but it contains some board related information.
This commit introduce a more suitable solution.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as the garbage collector will remove the empty function and the
add_ns16550_device is a empty inline if the driver is not enabled.
This will simplify add device adding.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Antony Pavlov
Michel Stam
Dmitry Smagin
Oleksij Rempel
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD