This adds the necessary files from the MUSB driver directly from Linux
3.17-rc5. No changes to the original files have been made so far.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of letting each driver implement usb_gadget_poll directly
implement this function in the core which then calls into the
drivers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for xHCI USB 3.0 host controllers found on various
SoCs and PCI devices. Currently, the driver only supports the virtual
USB 2.0 ports of the host controller, so if you plan to use USB 3.0
devices, put a USB 2.0 cable in between.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We imported a bunch of defines with ch9.h and ch11.h that are now
duplicated in usb_defs.h. Get rid of each duplicate in usb_defs.h
and prefer the ones from ch9.h and ch11.h.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the descriptors from ch11.h instead of duplicating them
in usb.h. usb_hub_descriptor now contains a union .u to differentiate
HS hub descriptor from SS hub descriptor.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
{Device,Interface,Endpoint}Requests are currently defined in private
ehci.h but are also useful for other drivers than ehci-hcd. Move them
to usb/usb_defs.h and also add some more class requests.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All other descriptors have their length field named bLength, except
imported usb_hub_descriptor from Linux uses bDescLength. Adjust the
name to match the others.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox supports up to 8 USB devices attached on a Hub, Linux does 31.
Reduce the USB_MAXCHILDREN define in ch11.h to the Barebox one and
put a comment above.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux has an extra include for chapter 11 (Hub Specification) of USB 2.0
spec. We already have a ch9.h, so import the one from Linux.
Barebox specific changes will be patched up later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to the Kernel multi function this gadget driver is used
for creating a USB device with multiple functions. This is
created and removed with the newly created 'usbgadget' command.
Based on the options it creates combinations of DFU, fastboot
and serial USB functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android fastboot protocol Can be used to update firmware and to
issue other lowlevel commands to the bootloader. This adds a
fastboot implementation based on the U-Boot fatboot code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Register DFU as usb_function_instance to make it work with composite
gadgets. Also use this internally for registering as DFU device (with
the 'dfu' command).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dfu command parses a string which contains a list of
devices and flags. This format is useful for other users
aswell, so add common helper functions to parse it and
let the dfu command use this format.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the device parameters:
usbgadget.product
usbgadget.vendor
usbgadget.manufacturer
usbgadget.productname
These variables are used to configure the USB vendor id, product id,
manufacturer name and product name.
Previously these were configured with arguments to the usbserial
and dfu command. The parameters are device static, so it's nice to
configure it somewhere in the environment instead of when calling
dfu/usbserial. Also when other gadget drivers are added we do not
have to duplicate the option parsing further.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can now detect changes in the USB device hierarchy properly, so
the 'force' option to the usb command is no longer necessary. We just
scan the busses each time the usb command is called.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds U-Boot 'usb tree' command functionality to barebox.
Here is an example output:
1 ID 0000:0000
| u-boot EHCI Host Controller
|
+-2 ID 05e3:0606
| USB2.0 Hub
|
+-3 ID 10c4:ea60
| Silicon Labs CP2102 USB to UART Bridge Contr P-00-00669
|
+-4 ID 05e3:0606
| | USB2.0 Hub
| |
| +-5 ID 05e3:0608
| | | USB2.0 Hub
| | |
| | +-6 ID 0d8c:000c
| | C-Media USB Headphone Set
| |
| +-7 ID 0d8c:000c
| C-Media USB Headphone Set
|
+-8 ID 0846:1040
NETGEAR NETGEAR FA120 Adapter
The tree view is enabled with 'usb -t'
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For situations when we don't know the desired mode for the OTG port
we register a otg device which has a mode parameter to specifiy the
desired mode on the command line.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have USB_SPEED_* definitions as macros in usb_defs.h and as an enum
in ch9.h. The defines in usb.h correspond to hardware bits in the
ehci controller. Get rid of them and keep the hardware independent
enums.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we have two conflicting definitions of struct usb_config_descriptor
and struct usb_interface_descriptor in the tree. This is because the USB code
uses additional fields in the structs for internal housekeeping. Add
struct usb_interface and struct struct usb_configuration with the housekeeping
data and embed the corresponding hardware structs into them. This frees the
way to use the definitions from ch9.h in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have usb_get_dev_index() function, so remove this declaration.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this all code uses barebox_get_model() and no longer
a compile time generated string.
Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A command should not be interested in the internal USB core state, so
move the state handling into the core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have usb_driver_unregister function, so remove this declaration.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The problem was introduced in
commit 51885a7d73
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Thu Jun 28 09:56:23 2012 +0200
Change byte order detection mechanism to kernel style
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the register defines for ULPI more complete. Also, Add a proper
ULPI_* Namespace to the existing defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper USB function the usbmisc registers have to be initialized.
This patch adds a driver which matches for the usbmisc registers. This
driver is called from a new driver which binds to the USB ports to
configure the misc registers. After that the driver registers the EHCI
driver and an ULPI transceiver if necessary. Currently only host mode
is supported, but device support can be added later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The EHCI core often is part of a otg core. Allow it to be registered
separately from another driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>