With this the verbosity of barebox can be controlled during runtime
using the 'loglevel' globalvar.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When globalvar_add_simple was called on previously existing variables
then the value was overwritten, even when value was passed as NULL.
Do not overwrite the value in this case which allows us to do a 'global'
on the same variable multiple times without loosing the values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so generic code can check if the console is enabled
and now we can use loadb & loadxy
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can get console by it's device
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so if we need to do something switch in the board we can fill this function
pointer (as example on Animeo IP shutdown some rs232 & rs485)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In theory we can overwrite a builtin command with a script. However,
I don't know a single case where this has been done. Scripts are
often more unflexible than commands so it's unlikely that a script
can extend the functionality of a builtin command. Moreover, the
internal command is no longer accessible once it's overwritten by
a script.
Invert this logic so that a builtin command can overwrite an existing
script. This will help when the 'boot' script is converted to a
builting command. Then with old environments the builtin command will
be used instead of the script.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to use struct image_data as the central data structure for bootm and
also as the input data structure. This makes it unclear which of the fields
are actually input data. This patch creates a struct bootm_data which is
exclusively used for input data to make usage clearer.
Also it moves the dispatching of multifile uImage pathnames to the core bootm
code so that the core code gets more flexible and the command code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as the console is always enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
even if the env is broken you will have a password
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we guarantee that barebox is secured again user interaction
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If CONFIG_PARAMETER is not set, dev_set_param() does not call the setter
function. Call it directly instead in this case.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The boards often have a sane default for the hostname. Provide a C
function for setting/getting it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of calling of_get_model() in barebox_get_model() add a
barebox_set_model() and use it to set the boardinfo once it's
available from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this all code uses barebox_get_model() and no longer
a compile time generated string.
Also this renames barebox_boardinfo() to barebox_get_model()
since we are going to add the corresponding _set_ function
and 'model' corresponds to the devicetree notion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far we only had the version command which is able to print
the barebox version. To make the barebox version available for
scripts add a globalvar for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drop ifdef CONFIG_UIMAGE_MULTI as the Kconfig option is not present anyway
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The CONFIG_PANIC_HANG a part of the U-Boot heritage.
It is used in the barebox code, but there is no mention
of this option in Kconfig files.
Sometimes this option is very helpful, so
let's resurrect it.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
of_print_cmdline() is passed a devicetree, so use this one instead
of the internal devicetree. This fixes the cmdline printout when
bootm on ARM is used with an external devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to force a width of the pointer, so use void *. Also it's
not modified in memory_display, so also add a const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
doing a 'cs0.active=' on the command line crashed barebox. Fix this by
not dereferencing val when it's NULL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code calculates the DDR2 SPD checksum as per JEDEC standard
No 21-C Appendix X (revision 1.2)
The code is based on the equivalent files from U-Boot version
git-a71d45d.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Being able to trace initcall is very useful when trying to
find out where startup hangs. This adds a kconfig option for
it to make it easier to access.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using devicetrees the boardinfo (or model) can be obtained
from the devicetree. Add a function to get the boardinfo so that
we have a chance to add information from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox of_find_node_by_path requires a node to be passed as start node
to start searching. Linux OF API does not pass this node and no current
user of it in barebox is passing anything else than the root node.
Therefore, we rename current function to of_find_node_by_path_from and
introduce a Linux OF API compatible of_find_node_by_path that always
passes the current root_node. Also, all current users of that function
are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Much of the bootm code is implemented in the command itself. Move
it to a common place to be able to call it from C aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Someone calling menu_show might only be interested in the entry the user
selected without having something in the action callback. Make it optional.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gotoXY has the argument order (y, x). Change this so that usage of this
function feels more natural.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
More than 9 menu entries in are single menu are not aligned anymore, like
this:
8 entry8
9 entry9
10 entry10
Use %2d in the printf format specifier to align more than 9 entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add mem_test routine. Useful to detect timing problems if someone
porting a new device to barebox. This test includes a data bus test,
address bus test and integrity check of memory.
This mem_test routine has as parameter start and end address of testing
space. The last parameter can skip the integrity check.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The NT disk Signature is a unique 32-bit value in the MBR allowing
to identify a MSDOS partitioned disk. The signature can be used to
specify the Linux rootfs.
This patch adds support for the NT disk Signature in the form of a
device parameter which can both be read and written.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use blk->ops->read/write. This bypasses the caching block
layer and was never intended like this. The upper API to the block layer
is the cdev layer. This patch adds block_read and block_write functions
and uses them where appropriate.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
block_read and block_write collide with a to-be-introduced
global function, so rename the file operation functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without devicetree support we print the Kernel commandline in
verbose mode. Do the same with devicetree boot aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The detection of the partition table fails when we have a barebox image
in the MBR. So check only for partition table types.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
memory_display is a function which should generally be available.
Currently it depends on memory command support being compiled in,
so move the function to a separate file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a C interface to set and get the bootsource instance:
int bootsource_get_instance(void);
void bootsource_set_instance(int instance);
Also export the shell variable "bootsource_instance".
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way the bootsource is exported to the environment, even if unknown.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch seperates the imx independent from the arch independent code. The
following functions and enums are renamed:
- imx_bootsource() -> bootsource_get()
- imx_set_bootsource() -> bootsource_set()
- enum imx_bootsource -> enum bootsource
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>