as we use a full buffer no need to check the SOF
and reset the rx_tail
fix at the same time the gem detection so we can have the rx_buffer
allocated correctly according to the IP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wait until fifo is empty, not until fifo is not full.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix chipidea-imx usb initialization.
"imx_chipidea_port_init" was moved before PORTSC setup in the
commit "USB i.MX chipidea: implement post init support". This
change breaks usb function with ULPI. Patch moves port initialization
back after PORTSC setup, so it works again.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes following warning:
drivers/w1/w1.c: In function 'w1_found':
drivers/w1/w1.c:471: warning: integer constant is too large for 'long' type
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes following warning:
drivers/mtd/nand/nand_write.c: In function 'nand_do_write_ops':
drivers/mtd/nand/nand_write.c:272: warning: 'ret' may be used uninitialized in this function
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since recently we check for the page being written for not being
empty and do not actually write it when it is. This fails for a
freshly created flash bad block table when all blocks are good.
In this case the bbt code will try to write an empty page, but
with the BBT marker in OOB. This page never gets written, so the
BBT code will not find a bad block table during next start up and
writes it again. Fix this by checking if we want to write OOB data,
if we do, then write the page, even if the data is empty.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
do not try to read the status in force mode
the link is up
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not write pages which only contain 0xff. UBI expects pages which
seem empty to be writable. This got lost with:
| commit 3139c3e9a6
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Nov 29 11:16:40 2012 +0100
|
| mtd core: call driver write function with complete buffer
|
| mtd->write is supposed to loop around pages internally, no need
| to do this in mtd_write. This fixes a huge write performance drop
| with the m25p80 driver when it was converted to a mtd driver recently.
| Since mtd->writesize is 1 for this driver mtd_write ended up doing
| single byte writes on the flash.
Introduce mtd_all_ff as a global function since UBI currently has its own
implementation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
RTS is an output. Either flow control is used and you care about the state or
it is not used and you don't care. So setting it to active does no harm in
either case. This is inline with what Linux does.
Mandatory for Highbank as example
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CFI Flash is currently handled outside the mtd layer which makes it
a special case. Integrate it into mtd so that we get rid of this
special status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of dereferencing struct mtd_info members directly use
the wrapper functions which have an additional check if the
callback exists if it is optional, like mark_bad or is_bad.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These are currently named mtd_read/write/erase. Functions with
the same name exist as global functions in the kernel. Rename
them to mtd_op_* to avoid name clashes with future mtd updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HSIC needs some special setup for i.MX6. Most ugly detail is that
the HSIC needs help of the IOMUX to configure a pullup on the strobe
line. This has to be done after the ehci controller has started.
Fortunately there is only one muxing possibility for the HSIC ports
on i.MX6, so we can simply control the iomux from the usbmisc driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
calxeda use the generic driver but have it's own compatible cf Linux kernel
Documentation
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so when the first stage booloader of firmware provide the dtb
we can use it to probe the memory
also allow to print what we probe
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use it on vexpress to detect the hardware mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Jean-Christophe PLAGNIOL-VILLARD
Marc Kleine-Budde
Alexander Shiyan
Sascha Hauer
Hubert Feurstein
Rob Herring