Remove what is an apparently valueless Kconfig variable HAS_OMAP_NAND.
A search of the entire source tree shows:
$ grep -r HAS_OMAP_NAND *
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig: select HAS_OMAP_NAND
arch/arm/mach-omap/Kconfig:config HAS_OMAP_NAND
arch/arm/configs/phycard_a_l1_defconfig:CONFIG_HAS_OMAP_NAND=y
$
where the definition of that variable is simply:
config HAS_OMAP_NAND
bool
so it seems pretty clear it can be removed as nothing is using it.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The environment isn't loaded until this command is
is selected - even if compiled in.
This patch makes the dependency explicit.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without the proper OMAP3 or OMAP4 dependency directives, you get the
wrong list of choices displayed based on which OMAP variant you pick.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When unaligned writes are used, typically doing a cp file /dev/mtdraw0.foo,
the alignement correction code was incorrectly handling such cases, and
didn't return the expected number of written bytes.
This was tested on a 528 block size.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
At least ARM allows us to dump the stack, but we currently
have no prototype for this. Add a dump_stack prototype and
provide a static inline function for architectures without
stack dump support. Also, call dump_stack() in panic() to
provide more information in the case of a panic.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we don't need malloc for the console anymore it's
safe to call printf anytime, so switch the initcall debugging
to regular debug() statements..
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we just hang when an initcall fails. This resulted
in most initcalls just returning 0 unconditionally. Instead
of hanging which usually leaves the user without a clue what
happened just continue and hope for the best.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hang() only outputs 'reset the board' whereas panic
can be passed a string which we can use to output
some more information what is happening.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changes the dynamically allocated kfifos to statically initialized
ones. This makes the console work without malloc and thus safe to be
called before malloc is initialized.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
kfifo currently only works with dynamically allocated fifos.
Change the currently unused kfifo_init to take a preallocated
fifo. This allows for statically initialized fifos.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise the kernel would not register the nand partitions.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The next limit with the current code will probably 2GiB.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On my laptop with avahi enabled (linux mdns implementation), the unmount
take quite long, because the avahi daemon tries to resolve the client's
host name. This leads to a delay of about 8 seconds of the unmount reply
messages, so that barebox runs into a timeout. This patch increases the
NFS timeout to 15 to work around the problem.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, we can only print the phy_status. Factor out the routine to
get the status, so we can query it from fec drivers and configure
accordingly. Needed because mx28 needs a special bit set for 10Mbit.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Q: "the linux driver add these bits, why not we?"
A: Because nobody activated the bits?
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a variable which gets updated when needed and only written
once. Will make further additions easier.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
remove double include, remove unused (and double in case of RCNTRL)
defines, sort the includes at least somewhat.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Extend DCD table and low level init routines. Add barebox SDRAM
device. Also, fix the memory size for bank 0 to 128MB. It was
accidently changed to 124MB here:
commit f928efa818
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Tue Jul 19 09:58:32 2011 +0200
add a add_mem_device function
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Roman Fietze <roman.fietze@telemotive.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The timings of the poller calling have changed, digging out
a latent bug in pxa27x udc controller.
The polling routine is called before the probe function is
called, and the driver internal are not initialized at that
time. This triggers a NULL pointer exception.
Fix it by moving poller registration after driver probe.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to check we do not exceed the size of the SRAM as example
introduce BAREBOX_MAX_BARE_INIT_SIZE the maximum size of bare_init
this will allow your bare_init will fit in SRAM as example
ARCH can overwrite it via ARCH_BAREBOX_MAX_BARE_INIT_SIZE
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding overlay support for phyCORE-i.MX35.
Also move the TEXT_BASE to leave enough space for the overlay image
at the end of the RAM.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding overlay support for i.MX3 sdc.
Foreground channel only works when background is also enabled.
The foreground video mode is always the same as the background.
Also added alpha command to set the alpha value of the foreground.
Tested on a phyCORE-i.MX35.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The offset for the IPU Clock in the CGR1 register is 18 not 22.
See MCIMX35RM table 14-17.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added num_modes to all imx_ipu_fb_platform_data structs.
Removed defines for pcm043 to choose display.
We may switch this during runtime now.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make support of multiple video modes possible for i.MX3 boards.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
board_init was moved to pure_initcall. broken since:
commit 0adce7ec68
Author: Sascha Hauer <s.hauer@pengutronix.de>
Date: Sun Jan 15 21:11:17 2012 +0100
ARM omap3: move board_init to pure_initcall
board_init initializes the mux and sdram. For both there is no
need to configure this so early. Move the code to a pure_initcall
and remove the surrounding unneeded code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since commit 494a12f703
platform lowlevel init was moved to mach-omap.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
since commit ae2ac15105
a_init was renamed to omap3_core_init and called from board code.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The document "PC16550D Universal Asynchronous
Receiver Transmitter with FIFOs" (vers. June 1995,
http://www.national.com/ds/PC/PC16550D.pdf) states
that IER (Interrupt Enable Register) is accessible
if the bit DLAB = 0 (DLAB is bit 7 in LCR; in barebox
DLAB known as LCR_BKSE).
So before IER access we need set DLAB to 0.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cherry-picked from U-Boot.
commit 69716c1900274a89bd5cbd1b0bb276ceaaa04f61
Author: Jason Kridner <jkridner@beagleboard.org>
Date: Wed Apr 20 08:54:16 2011 -0500
USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
Remove __attribute__ ((packed)) to prevent byte access to soc
registers in some gcc versions.
Having patches to enable ehci for the BeagleBoard lying around for
several months, this one was the show-stopper.
Switched to align(4), rather than remove the attribute, per suggestion
from Alexander.
Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
finding the problem.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>