---=== SPD EEPROM Information ===---
EEPROM Checksum of bytes 0-62 OK (0xDF)
Total number of bytes in EEPROM 256
Fundamental Memory type DDR2 SDRAM
SPD Revision 1.2
---=== Memory Characteristics ===---
Maximum module speed 800 MHz (PC2-6400)
Size 2048 MB
Banks x Rows x Columns x Bits 8 x 14 x 10 x 64
Ranks 2
SDRAM Device Width 8 bits
Module Height 30.0 mm
Module Type SO-DIMM (67.6 mm)
DRAM Package Planar
Voltage Interface Level SSTL 1.8V
Module Configuration Type No Parity
Refresh Rate Reduced (7.8 us) - Self Refresh
Supported Burst Lengths 4, 8
Supported CAS Latencies (tCL) 6T
tCL-tRCD-tRP-tRAS 6-6-6-18 as DDR2-800
Minimum Cycle Time 2.5 ns at CAS 6
Maximum Access Time 0.40 ns at CAS 6
Maximum Cycle Time (tCK max) 8 ns
---=== Timing Parameters ===---
Address/Command Setup Time Before Clock (tIS) 0.17 ns
Address/Command Hold Time After Clock (tIH) 0.25 ns
Data Input Setup Time Before Strobe (tDS) 0.05 ns
Data Input Hold Time After Strobe (tDH) 0.12 ns
Minimum Row Precharge Delay (tRP) 15.00 ns
Minimum Row Active to Row Active Delay (tRRD) 7.50 ns
Minimum RAS# to CAS# Delay (tRCD) 15.00 ns
Minimum RAS# Pulse Width (tRAS) 45.00 ns
Write Recovery Time (tWR) 15.00 ns
Minimum Write to Read CMD Delay (tWTR) 7.50 ns
Minimum Read to Pre-charge CMD Delay (tRTP) 7.50 ns
Minimum Active to Auto-refresh Delay (tRC) 60.00 ns
Minimum Recovery Delay (tRFC) 127 ns
Maximum DQS to DQ Skew (tDQSQ) 0.20 ns
Maximum Read Data Hold Skew (tQHS) 0.30 ns
---=== Manufacturing Information ===---
Manufacturer JEDEC ID 7f 98 00 00 00 00 00 00
Manufacturing Location Code 0x05
Part Number
Manufacturing Date 2014-W47
Assembly Serial Number 0x43266892
Signed-off-by: Alexander Smirnov <alllecs@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The code calculates the DDR2 SPD checksum as per JEDEC standard
No 21-C Appendix X (revision 1.2)
The code is based on the equivalent files from U-Boot version
git-a71d45d.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Alexander Smirnov
Renaud Barbier