We have fb_enable and fb_disable which handle enabling of a
framebuffer, so use it instead of calling into the ops directly.
This gets the enable count straight.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers need an explicit sync method to flush the virtual
framebuffer to the display. It is called fb_flush().
fb_flush() gets called on fbc_putc, on fb_close and in the pattern cycle
in the fbtest command.
Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Our asprintf and vasprintf have different prototypes than the glibc
functions. This causes trouble when we want to share barebox code
with userspace code. Change the prototypes for (v)asprintf to match
the glibc prototypes. Since the current (v)asprintf are convenient
to use change the existing functions to b(v)asprintf.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Resolution can't be changed anyway once fb_enable() has been called,
since no corresponding fb_disable() call appears in the code.
Signed-off-by: Aleksey Kuleshov <rndfax@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For speeding up rendering we need shadow framebuffers. This is currently
implemented in the gui functions. This does not work properly when two
users (splash and fbconsole) use the same framebuffer since in this case
two different shadow framebuffers will be used. This patch implements
shadowfb handling in the fb core directly. With this the fb device gets
a parameter 'shadowfb'. When this is true the fb core will allocate a
shadow fb and provide it to the users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch realizes framebuffer console support for barebox. It
supports colors and enough escape sequences to show the barebox
console and editor properly.
fbconsole mini-HOWTO
====================
1. compile sandbox barebox with
CONFIG_VIDEO=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_DRIVER_VIDEO_SDL=y
2. run barebox
3. test fbconsole
fbconsole0.active=oe
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a framebuffer is kept enabled when Linux starts its framebuffer
memory should be reserved. Otherwise Linux may overwrite its contents.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* some output sections started with "foo: bar", some with "foo = bar". Unify this.
* there was a fixed size to the "foo =" parameters, which wasn't fitting, this
was especially visible at "devinfo global"
* don't output "resources:", "driver:" and "bus:" lines if there are none
resources, drivers or busses involved.
* remove some empty lines
* harmonize differentiation between headlines (e.g. "resources:") and values
by indenting values slightly
* uppercase some texts
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'ret' is only initialized when info->fbops->fb_activate_var exists, so
only use it in this case.
Reported-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have dev_add_param_enum() now, so use it for the mode_name
setting. Also drop the special case for single mode framebuffers,
just add the mode_name parameter for this case aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
And use it inside struct fb_info. This struct has the advantage
that the supported modes can be passed around in a single pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox does not need the screen size directly, but we pass the
framebuffer to Linux via simnplefb it is desirable to pass the
full size of the framebuffer. Default to calculated values from
the screen resolution.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to configure the active framebuffer for the kernel through
device tree.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for framebuffers with noncontiguous horizontal lines.
Video drivers can set this value if the hardware requires it.
In case a driver does not set it, the current value of
xres * (bpp / 8) is used instead.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the info is device specific and not driver specific, attach
the callback to the device. This makes it possible to have a info
callback for a device which does not have a driver attached.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit 5f03074 changed storing struct resource end insted of size.
Fix calculation of end in fb
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is need for oftree device probing
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, set size to 0 when setting up the framebuffer failed so that
the user cannot write to uninitialized framebuffer memory.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling fb_activate_var potentially changes the framebuffer address,
so we have to update the fb0 cdev afterwards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add the possibility to change the video mode at barebox's runtime
if the graphics driver in use supports it.
Signed-off-by: <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To setup the default 'enable' setting the "dev_set_param(dev, "enable", "0");"
does not work as expected. After the call the parameter is still "<NULL>".
This is due to any change of the setting is rejected, if the same setting
is already active.
This patch also let the default setting be successfull, but only calls the
graphics backend if a change happens.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change device parameters so that the memory management is in generic
code. This also removes the need of storing statically initialized
parameters as they are stored in a struct list_head for each device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Bastian Stender
Antony Pavlov
Aleksey Kuleshov
Holger Schurig
Andre Heider
Jan Weitzel
Jean-Christophe PLAGNIOL-VILLARD
Juergen Beisert