| .. |
|
A3000.h
|
* Patches by Yuli Barcohen, 13 Jul 2003:
|
2003-07-14 22:13:32 +00:00 |
|
ADCIOP.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ADNPESC1.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
ADNPESC1_base_32.h
|
* Patch by Stephan Linz, 09 Mar 2004
|
2004-03-14 15:20:55 +00:00 |
|
ADS860.h
|
Patch by Yuli Barcohen, 19 Apr 2004:
|
2004-06-06 21:35:06 +00:00 |
|
AMX860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
AP1000.h
|
Support passing of OF flat trees to the kernel.
|
2005-10-13 01:45:54 +02:00 |
|
APC405.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
AR405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ASH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
Adder.h
|
Add support for Adder boards with 16MB SDRAM;
|
2006-03-12 01:43:03 +01:00 |
|
Alaska8220.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
AmigaOneG3SE.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
B2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
BAB7xx.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
BMW.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CANBT.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
CATcenter.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
CCM.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
CMS700.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPC45.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
CPCI2DP.h
|
PMC405 and CPCI405: Moved configuration of pci resources into config file.
|
2006-01-18 20:03:15 +01:00 |
|
CPCI405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPCI405AB.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPCI405DT.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPCI440.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
CPCI750.h
|
Minor code cleanup
|
2006-03-06 13:03:37 +01:00 |
|
CPCI4052.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CPCIISER4.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
CPU86.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
CPU87.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
CRAYL1.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
CU824.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
DASA_SIM.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
DB64360.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
DB64460.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
DK1C20.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
DK1C20_safe_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1C20_standard_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
DK1S10_mtx_ldk_20.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10_safe_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DK1S10_standard_32.h
|
Patches by Stephan Linz, 30 Jan 2004:
|
2004-02-09 23:12:24 +00:00 |
|
DP405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
DU405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ELPPC.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
ELPT860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
EP88x.h
|
Add support for EmbeddedPlanet EP88x boards
|
2006-03-12 23:17:31 +01:00 |
|
ERIC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ESTEEM192E.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
ETX094.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
EVB64260.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
EXBITGEN.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
FADS823.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
FADS850SAR.h
|
* Patch by Robert Schwebel, 10 Jun 2004:
|
2004-06-10 21:34:36 +00:00 |
|
FADS860T.h
|
Patch by Yuli Barcohen, 19 Apr 2004:
|
2004-06-06 21:35:06 +00:00 |
|
FLAGADM.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
FPS850L.h
|
* Fix flash parameters passed to Linux for PPChameleon board
|
2004-06-17 18:50:45 +00:00 |
|
FPS860L.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
G2000.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
GEN860T.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
GENIETV.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
GTH.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
HH405.h
|
Merge the new NAND code (testing-NAND brach); see doc/README.nand
|
2006-03-06 11:25:22 +01:00 |
|
HIDDEN_DRAGON.h
|
* Patch by Yusdi Santoso, 22 Oct 2004:
|
2005-04-03 15:51:42 +00:00 |
|
HMI10.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
HUB405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
IAD210.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
ICU862.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
IDS8247.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
IP860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
IPHASE4539.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
ISPAN.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
IVML24.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
IVMS8.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
IceCube.h
|
Set SDelay register in the DDR controller for the MPC5200B chip.
|
2006-03-29 13:17:09 +02:00 |
|
JSE.h
|
Fix device partition intialization for SystemACE disks.
|
2005-10-05 00:25:17 +02:00 |
|
KAREF.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
KUP4K.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
KUP4X.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
LANTEC.h
|
* Fix PHY address argument passing with mii info command
|
2005-09-24 21:54:50 +02:00 |
|
M5272C3.h
|
* Some code cleanup
|
2004-02-12 00:47:09 +00:00 |
|
M5282EVB.h
|
* Some code cleanup
|
2004-02-12 00:47:09 +00:00 |
|
MBX.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MBX860T.h
|
Initial revision
|
2002-08-19 11:57:05 +00:00 |
|
METROBOX.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
MHPC.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MIP405.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
ML2.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
MOUSSE.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MPC86xADS.h
|
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
|
2006-03-12 01:55:43 +01:00 |
|
MPC885ADS.h
|
Switch MPC86xADS and MPC885ADS boards to use cpuclk environment
|
2006-03-12 01:55:43 +01:00 |
|
MPC8260ADS.h
|
Add board support for armadillo HT1070
|
2005-09-26 01:06:33 +02:00 |
|
MPC8266ADS.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MPC8349ADS.h
|
Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads
|
2006-03-12 21:49:19 +01:00 |
|
MPC8349EMDS.h
|
Some code cleanup
|
2006-04-16 10:51:58 +02:00 |
|
MPC8540ADS.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
MPC8540EVAL.h
|
Fix style issues primarily in 85xx and 83xx boards.
|
2005-08-01 13:20:47 -05:00 |
|
MPC8541CDS.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
MPC8548CDS.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
MPC8555CDS.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
MPC8560ADS.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
MUSENKI.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
MVBLUE.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
MVS1.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
NC650.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
NETPHONE.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NETTA.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
NETTA2.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NETVIA.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
NSCU.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
NX823.h
|
Initial revision
|
2002-08-20 16:13:03 +00:00 |
|
OCRTC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
ORSG.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
OXC.h
|
* Patch by Mark Jonas: Remove config.tmp files only when
|
2004-04-08 22:31:29 +00:00 |
|
P3G4.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
PATI.h
|
* Patch by Ronen Shitrit, 10 Dec 2003:
|
2004-01-03 00:43:19 +00:00 |
|
PCI405.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
PCI5441.h
|
Patches by Scott McNutt, 24 Aug 2004:
|
2004-10-10 21:27:30 +00:00 |
|
PCIPPC2.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PCIPPC6.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PIP405.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
PK1C20.h
|
* Patch by Scott McNutt, 21 Oct 2004:
|
2005-03-30 23:28:18 +00:00 |
|
PLU405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM520.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM826.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM828.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
PM854.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
PM856.h
|
Fix build problems for PM856 Board
|
2005-08-08 00:47:14 +02:00 |
|
PMC405.h
|
PMC405 and CPCI405: Moved configuration of pci resources into config file.
|
2006-01-18 20:03:15 +01:00 |
|
PN62.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
PPChameleonEVB.h
|
Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440)
|
2006-03-31 14:32:07 +02:00 |
|
QS823.h
|
Patch by Wolter Kamphuis, 05 Dec 2003:
|
2003-12-07 22:27:15 +00:00 |
|
QS850.h
|
Patch by Wolter Kamphuis, 05 Dec 2003:
|
2003-12-07 22:27:15 +00:00 |
|
QS860T.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
R360MPI.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
RBC823.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
RPXClassic.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
RPXlite.h
|
RPXlite configuration fixes
|
2006-03-12 01:48:55 +01:00 |
|
RPXlite_DW.h
|
Add support for Lite5200B board.
|
2006-03-17 11:42:53 +01:00 |
|
RPXsuper.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
RRvision.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
Rattler.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
SBC8540.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
SBC8560.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
SCM.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
SL8245.h
|
* Add support for USB Mass Storage Devices (BBB)
|
2003-09-10 18:20:28 +00:00 |
|
SM850.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
SPD823TS.h
|
* Patch by Martin Krause, 17 Jul 2003:
|
2003-07-17 23:16:40 +00:00 |
|
SX1.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
SXNI855T.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
Sandpoint8240.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
Sandpoint8245.h
|
Fix problems with SNTP support;
|
2005-04-02 22:37:54 +00:00 |
|
TASREG.h
|
Code cleanup.
|
2004-12-16 21:44:03 +00:00 |
|
TOP860.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TOP5200.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM85xx.h
|
Add support for TQM8541/8555 boards, TQM85xx support reworked:
|
2005-11-30 13:06:40 +01:00 |
|
TQM823L.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM823M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM834x.h
|
Enable address translation on MPC83xx
|
2006-02-10 15:40:06 -06:00 |
|
TQM850L.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM850M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM855L.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM855M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM860L.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM860M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM862L.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM862M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM866M.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
TQM5200.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
TQM8260.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
Total5200.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
VCMA9.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
VOH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
VOM405.h
|
New PPC 405EP board added: CMS700
|
2005-11-15 10:35:59 +01:00 |
|
VoVPN-GW.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
W7OLMC.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
W7OLMG.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
WUH405.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
XPEDITE1K.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
Yukon8220.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
ZPC1900.h
|
Memory configuration changes for ZPC.1900 board
|
2006-03-12 01:45:44 +01:00 |
|
ZUMA.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
adsvix.h
|
Patch by Steven Scholz, 06 Apr 2005:
|
2005-04-06 13:52:31 +00:00 |
|
aev.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
armadillo.h
|
Add board support for armadillo HT1070
|
2005-09-26 01:06:33 +02:00 |
|
assabet.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
at91rm9200dk.h
|
Add support for multiple PHYs.
|
2005-10-28 22:30:33 +02:00 |
|
atc.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
bamboo.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
barco.h
|
Support passing of OF flat trees to the kernel.
|
2005-10-13 01:45:54 +02:00 |
|
bubinga.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
c2mon.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
canmb.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
cerf250.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
cm41xx.h
|
* Extend burst mode RAM test program to take a loop count
|
2005-05-23 10:49:50 +00:00 |
|
cm4008.h
|
* Extend burst mode RAM test program to take a loop count
|
2005-05-23 10:49:50 +00:00 |
|
cmc_pu2.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
cmi_mpc5xx.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
cobra5272.h
|
Patch by Florian Schlote, 08 Sep 2004:
|
2005-01-09 18:21:42 +00:00 |
|
cogent_common.h
|
* Patch by Shlomo Kut, 29 Mar 2004:
|
2004-09-29 11:02:56 +00:00 |
|
cogent_mpc8xx.h
|
* The PS/2 mux on the BMS2003 board needs 450 ms after power on
|
2004-01-20 23:12:12 +00:00 |
|
cogent_mpc8260.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
cpci5200.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
cradle.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
csb226.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
csb272.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
csb472.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
csb637.h
|
Fix the machine-id of the Cogent csb637 board
|
2005-10-06 01:26:16 +02:00 |
|
dbau1x00.h
|
* Fix dbau1x00 Board
|
2006-04-11 14:53:29 +02:00 |
|
debris.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
delta.h
|
Merge with /home/m8/git/u-boot
|
2006-04-12 12:26:32 +02:00 |
|
dnp1110.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
eXalion.h
|
* Patch by Pierre Aubert, 26 Feb 2004
|
2004-02-27 08:20:54 +00:00 |
|
ebony.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
ep7312.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
ep8248.h
|
Add support for ep8248 board
|
2005-08-06 01:42:58 +02:00 |
|
ep8260.h
|
Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs
|
2005-09-25 16:56:15 +02:00 |
|
evb4510.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
ezkit533.h
|
Coding Style cleanup
|
2006-03-12 02:55:22 +01:00 |
|
gcplus.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
gw8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
h2_p2_dbg_board.h
|
* Code cleanup (ARM mostly)
|
2004-07-01 16:30:44 +00:00 |
|
hermes.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
hmi1001.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
hymod.h
|
* Fix PHY address argument passing with mii info command
|
2005-09-24 21:54:50 +02:00 |
|
impa7.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
incaip.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
inka4x0.h
|
Update default environment for INKA4x00 board.
|
2006-02-07 15:18:25 +01:00 |
|
innokom.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
integratorap.h
|
Update ARM Integrator boards:
|
2005-10-04 23:10:28 +02:00 |
|
integratorcp.h
|
Update ARM Integrator boards:
|
2005-10-04 23:10:28 +02:00 |
|
ixdp425.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
kb9202.h
|
Complete support for the KwikByte KB920x boards
|
2005-10-06 01:22:22 +02:00 |
|
lart.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
logodl.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
lpd7a400-10.h
|
* Patch by Paul Ruhland, 10 Jun 2004:
|
2004-06-10 21:55:33 +00:00 |
|
lpd7a400.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
lpd7a404-10.h
|
* Patch by Paul Ruhland, 10 Jun 2004:
|
2004-06-10 21:55:33 +00:00 |
|
lpd7a404.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
luan.h
|
Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board.
|
2005-11-29 18:18:21 +01:00 |
|
lubbock.h
|
Fixes to the Lubbock (PXA 25x) support:
|
2005-09-26 00:29:53 +02:00 |
|
lwmon.h
|
* Patch by Detlev Zundel, 30 Jun 2005:
|
2005-07-04 00:03:16 +00:00 |
|
mcc200.h
|
Fix Quad UART mapping on MCC200 board due to new HW revision
|
2006-04-13 16:35:22 +02:00 |
|
ml300.h
|
Cleanup (PPC4xx is AMCC now)
|
2005-09-23 11:05:55 +02:00 |
|
modnet50.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
mp2usb.h
|
Add support for AT91RM9200 OHCI Controller.
|
2005-09-26 01:26:56 +02:00 |
|
mx1ads.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
mx1fs2.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
netstar.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
ns9750dev.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
o2dnt.h
|
Change port configuration for O2DNT (CODEC1 on PSC1)
|
2005-12-06 20:33:07 +01:00 |
|
ocotea.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
omap730.h
|
* Patch by Rishi Bhattacharya, 08 May 2004:
|
2004-06-08 00:22:43 +00:00 |
|
omap730p2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1510.h
|
Add support for Siemens SX1 mobile phone;
|
2004-03-12 00:14:09 +00:00 |
|
omap1510inn.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1610h2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap1610inn.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
omap2420h4.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
omap5912osk.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
p3p440.h
|
Merge with /home/sr/git/u-boot/cfi-flash
|
2006-04-06 00:16:58 +02:00 |
|
pb1x00.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pcu_e.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pf5200.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pleb2.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
ppmc8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
purple.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
pxa255_idp.h
|
Add Vibren (was Accelent) PXA255 IDP Support
|
2005-09-25 15:59:01 +02:00 |
|
quantum.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
rmu.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
rsdproto.h
|
* Patch by Jon Loeliger, Kumar Gala 2005-02-08
|
2005-07-23 10:37:35 -05:00 |
|
sacsng.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
sbc405.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
sbc8240.h
|
* Rename SBC8560 into sbc8560 for consistency
|
2004-07-10 22:35:59 +00:00 |
|
sbc8260.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
sbc8560.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
sc520_cdp.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
sc520_spunk.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
sc520_spunk_rel.h
|
* Code cleanup:
|
2003-06-27 21:31:46 +00:00 |
|
scb9328.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
shannon.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smdk2400.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smdk2410.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
smmaco4.h
|
Rename SMMACO4 board into smmaco4 for consistency with Linux.
|
2006-02-22 10:25:39 +01:00 |
|
sorcery.h
|
Add PCI support for Sorcery board.
|
2005-05-16 15:23:22 +00:00 |
|
spieval.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
stamp.h
|
Coding Style cleanup
|
2006-03-12 02:55:22 +01:00 |
|
stxgp3.h
|
* Patch by Jon Loeliger, 2005-05-05
|
2005-07-25 14:05:07 -05:00 |
|
stxxtc.h
|
Fix JFFS2 support for legacy NAND driver.
|
2006-04-08 19:08:06 +02:00 |
|
suzaku.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
svm_sc8xx.h
|
Re-factoring the legacy NAND code (legacy NAND now only in board-specific
|
2006-03-05 18:57:33 +01:00 |
|
tb0229.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
trab.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
uc100.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
utx8245.h
|
Adjust "echo" as a default command
|
2006-03-12 16:51:59 +01:00 |
|
v37.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
versatile.h
|
* Patch by Philippe Robin, 28 Sept 2004:
|
2004-10-11 22:51:13 +00:00 |
|
voiceblue.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
walnut.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
wepep250.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
xaeniax.h
|
Adjust configuration of XENIAX board
|
2005-08-04 19:45:01 +02:00 |
|
xm250.h
|
Patch by Steven Scholz, 4 Apr 2005:
|
2005-04-04 12:44:11 +00:00 |
|
xsengine.h
|
Add common (with Linux) MTD partition scheme and "mtdparts" command
|
2005-08-08 01:03:24 +02:00 |
|
yellowstone.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
yosemite.h
|
Change all '$(...)' variable references into '${...}'
|
2005-11-20 21:40:11 +01:00 |
|
zylonite.h
|
SDRAM now working for delta board, but there are still aliasing problems,
|
2006-02-22 14:05:44 +01:00 |
cf48eb9abd