Re-write of the section describing how to update package source
code. I added some rationale to the process and provided more
detail regarding where to find the source files and the naming
scheme behind it. The new section is on review so changes could
occur.
(From yocto-docs rev: 2a1d37a87abb82c66a0ad3fc39d5da9f2f5b1b7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Last edits to the "Git" section and the bulleted item that defines
the term "Yocto Project Files." These edits were from a review of
Joshua Lock.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: 57cbb06aac566e02bb2e2a1ad05c3ff6dbb0359c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added "tasks" to the bullet item that says the manual describes
common development models. Now with the "Common Tasks" chapter
in here the intro needed tweaked.
(From yocto-docs rev: 8faa6308dbee2138f404d18c6d384b9af7bad5cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Broken link fixed.
(From yocto-docs rev: 6c9102ed8651ab93de46781dede05b2312d102d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another pass through the document and cleaned up some
mistakes and also removed redundant links to manuals where I had
already provided a link to the specific section.
(From yocto-docs rev: 5da8ffe100127f5fe4bfd2b478f177d6bef3a968)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moving the "Common Tasks" section from the YP Reference Manual into
the YP Development Manual upset a bunch of links. I have corrected
these links.
(From yocto-docs rev: 69ee73c59958aaab6f6370231c65300d1d8c92f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated dev-manual.xml to include the new common tasks file
'dev-manual-common-tasks.xml' and updated poky-ref-manual.xml
to not have the file 'extended.xml'. This reflects the new
chapter swap between the YP reference manual and the YP
development manual.
(From yocto-docs rev: 978e3be4f20b0a95cf124ce1a9136016a3e71da1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am moving the "extended.xml" file from the YP Reference Manual
to the YP Development Manual. This will be the basis for a common
tasks chapter that talks about common things developers do.
(From yocto-docs rev: 874b3a399c69e5eabf5001a5df5a3064a6d1f0ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the tarball and Git repo example in section where user
is getting the source files. I was not using the default
Yocto Project Files top-level name for the tarball method.
Reported-by: Joshua.lock <joshua.lock@intel.com>
(From yocto-docs rev: 770c6799ea58df3d81df8f466f1bb9878532a995)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I split the Git section into a couple sub-sections. One talks
about concepts and the other is the section on simple commands.
Hopefully the concepts section now addresses the confusion
people are having over branches, tags, etc.
Also changed the definition of the term "Yocto Project Files"
based on some input by Joshua Lock.
(From yocto-docs rev: d76a9942dd12e6bd3ccba5331039477b26c02379)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the example to use a different kernel (linux-yocto-3.0-1.1.x)
and the example that creates the bare clone and the copy of the
bare clone to use better names that are more easily distiguishable:
linux-yocto-3.0-1.1.x.git and my-linux-3.0-1.1.x-work, respectively.
(From yocto-docs rev: b1366d35155121f5aa576715541036304c99f13b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits help explain the differences between local YP files
created through a tarball extraction vs cloning a Git repository.
(From yocto-docs rev: ed368800c3e9ece71d27d6d690f0ddc264a4c2da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the section describing how to set up the YP files before the
BSP example. I am working with Joshua Lock on these to settle them
down. The edits are trying to establish understanding between a
Git repository and a tarball... just what the user has a hold of
after getting the files by either method.
Reported-by: Joshua Lock <joshua.lock@intel.com>
(From yocto-docs rev: ddb8333ea2f9898b7016ca01887e1acdc0581c06)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is confusion as to how to set up the Git repository and be
sure you have the snapshot of the release. I have changed the
description to use a tag rather than the branch names. The
stuff is out for review with Josh.
(From yocto-docs rev: 2521873e1bf8e1ad398fae4b7297f8746a34258f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The information surrounding the central download directory was
pretty scant. Jim Abernathy pointed this out in an email sent to
me. As a start, I have added quite a bit more information to
the glossary description for DL_DIR. Part of that added information
is a pointer to the FAQ entry that describes exactly how the
build system gets source files. Then, in the YP Development Manual
in the section that introduces the build process, I added several
references to various variables that are set in the local.conf
file prior to kicking off the build.
Reported-by: Jim Abernathy <jim.abernathy@intel.com>
(From yocto-docs rev: 4d7835a3bff5bd054301fa9ab6954c11c88dad58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poor flow for the config_smp example. Upon reading this example
it did not stand well on its own. I added some text, albeit
redundant but necessary I felt, so that the example would stand on
its own.
(From yocto-docs rev: f8c0c9469eae0788f1bfba309deefb4e03d4bc29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy pointed out an area where the bitbake command is
run from the top-level poky directory. This is incorrect and the
user should run this from the build directory. I changed the
instance so that the example instructs the user to either run the
environment setup script first, which would place him into the
build directory. I also reinforced it by adding supporting text
saying that you should run the bitbake command from the build
directory.
Reported-by: Jim Abernathy <jim.abernathy@intel.com>
(From yocto-docs rev: b111e5e4faa6d4e5e99f48b886aeb72bb12e2914)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In resolving a commit conflict I accidently inserted some "1.1.1"
strings in some URLs where they should have been "latest". I fixed
these back.
(From yocto-docs rev: a78a28f317b426413ec0bd8c4115d5e69f609283)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the kernel repos needed the git push
command fixed. There was no ":" character in it.
(From yocto-docs rev: 4add1c83a8e3f4fec9ec6b678e31e259c700c077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the figure again and I updated the surrounding
text.
(From yocto-docs rev: ed0aea8ad3670aace1eb51ca7a72e75a4c129fba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the picture that shows the index of releases. they renamed
this from index of downloads.
(From yocto-docs rev: 38ffbb3138fa43fcb44456e6b6f46dc78cc87a14)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is note instructing the user to delete unused .bbappend files
or comment out the COMPATIBLE_MACHINE statements in those unused
files before running the build in the example. the note was not
clear about the COMPATIBLE_MACHINE statement in the .bbappend file
that is actually being used. I edited the text to be clear about
that.
(From yocto-docs rev: 73ed4df6f312c25103c41a1ee1dcdb9f7114ca45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the console output created when you create the bare clone
and the copy of the bare clone.
(From yocto-docs rev: cc6290e416fb113f687645517bccf3f6f177395e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the console output returned when you set up the
poky-extras repo.
(From yocto-docs rev: f0fe9a6e04f72c727562719244719ce1058256e4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a link that had a spacing problem and should not have
been linking to the manual in general. Fixed the spacing problem
and removed the links to the book in general.
(From yocto-docs rev: ce274c0290c4f8998bb682f8d84f5ee456837c62)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found another broken link to the Git documentation. They must have changed
this stuff up. So I set the link to point to the appropriate area in
the Git Community Book. Talks about distributed workflows.
(From yocto-docs rev: f81d6bbff20629b2b3af73ef53f471090b9d828b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
there was a link to some Git documentation referencing workflows that
apparently had gone stale. I replaced the reference with a link to
the Git Community Book.
(From yocto-docs rev: 7a2cbe4c45eb9bb53d5ddbc014bd6005c2844d56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Git Workflow was missing a pull line from the second (bottom) contrib
box into the project's master Git repository. I added the line.
(From yocto-docs rev: e7e2f92a92cec3798395470595ba1a2beaf36575)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the Bug Tracking section to include rudimentary use of
Bugzilla for entering a new bug.
Fixes [YOCTO #237]
(From yocto-docs rev: 8f2702444812c9dc25195340acebbaae15cd59d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Text that suggests setting the BB_NUMBER_THREADS and
PARALLEL_MAKE variables to speed build time has been updated to
suggest a setting of twice the number of host cores supported.
The 2x number came to light through a discussion on the project
mailing list initiated by Robert P. J. Day.
Reported-by: Robert P. J. Day
(From yocto-docs rev: 1846b41a595b7bd905ca828eaa04112d1533d7a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi provided a review up through part of the "model"
chapter. I have implemented his comments mosty verbatim.
Reported-by: Tom Zanussi
(From yocto-docs rev: 693d4fadd4b34ffef9953fb1850d381ff7c028a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are many references to YP documentation throughout the
YP manual set. They used to have hard-coded links to the
current release (e.g. yoctoproject.org/docs/1.1 for Edison).
This created a situation where if you went to a document on
the website and clicked on a external reference to another
manual, you would redirect to the current manual on the website.
Really, you would want to go to the latest manual, which is
one that is under development. Changing the links to
"yoctoproject.org/docs/latest" makes the tip of master, which
is used for devloping the next release, always have references
to the manuals being developed and not back to the stable
released set of manuals.
This "latest" and "current" scheme for the links is not perfect.
What has to happen when the latest set of the manuals freezes
and becomes the next stable release, all the links in the docs
will need to be changed from "latest" in the URL to the new
release number. So for example, all the "latest" occurences
would need to be changed to "1.2". Then for the next cycle
as development begins again, the links need to be infused with
"latest" again.
(From yocto-docs rev: a234aef34303b07671da956de0e94b352797143e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert found five instances where I missed the correct usage of
"BitBake."
(From yocto-docs rev: 0819076e8677accd157497ed4fa33ebab2528044)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I increased the font size and darkened the type up for footnote
text.
(From yocto-docs rev: d43e99137c350d68484df6c0a361804d8ccd2877)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several notes were not producing a line-break betweent he end
of the note and the start of the next paragraph. Most work, but
for some reason these did not. It is a mystery to me.
(From yocto-docs rev: 2c87e0cb781b6d94297dc558504f869bd54a6ad0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For HTML formatting I added a new element to format the footnote
to pt-8 font.
(From yocto-docs rev: e0dd425a60ca6e1b75406c7711295e732cacebb9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Per Tom Zanussi's suggestion, we added a footnote to the paragraph
instructing the user on build problems for the example. I don't
have clean fonts in the HTML version of the output. I am still working
on figuring that out.
Reported by: Tom Zanussi
(From yocto-docs rev: 30fe7bd239292ed92f76fbc2f1fad62469f7fe9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some wording changes to keep things accurate. Also inserted some
" " characters in some headings to force an extra space between
normal font and courier font words. It appears the PDF version of
the generated manual shoves these words together with no intervening
space. Looks like hell.
Reported by: Tom Zanussi
(From yocto-docs rev: 5dcb9ae99f1752599fd56a276ccafd79a52334f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported by: Robert P. J. Day.
Two corrections identified by Robert. One is a wrong reference to the
tarball needed for the example. The other is a more complete description
of what the appendix is trying to accomplish.
(From yocto-docs rev: 387c6cbd84bafd7f15c064a8e801d0750b0b4007)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported by Robert P. J. Day.
Robert indicated that it was a bit of a search to find the tarball
for the example. Tom suggested that we have some text that helps
to locate the Crown Bay no-emgd tarball for edison. I added some
clarifying text to help.
(From yocto-docs rev: d21120bbae81f58a9816cf56c61181d287afd295)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Reported by Robert P. J. Day.
Robert was working through this BSP example in the development manual
and ran into some problems and some confusion in areas. This launched
a long "help-desk" session with Tom Zanussi. In addressing Robert's
issues, Tom decided to make a run through of the example as it was
written. For the most part the example was sound but needed some
technical tweaks as well as some expansion of the text to make things
clearer. Tom submitted the patch that addressed these concerns.
Scott Rifenbark reviewed the patch and further modified some of the
writing to make it consistent with the existing writing in the manual.
(From yocto-docs rev: deda08b372c02889398d24ae7159f8b2fbe3c8cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two typos fixed.
(From yocto-docs rev: 6d99eb7f728b812be37a3865cbebd3c4cb4b67be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two small corrections for better wording. A mis-spelling also
fixed.
(From yocto-docs rev: 915ec9f9adbde86008ffb086ac81a435d5910733)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert suggested some minor wording changes that are good.
(From yocto-docs rev: 50822bc3722e2f3b0a73ed837842ddc5c7595c7b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert ear-marked some links to point to downloads.yoctoproject.org.
He also made several wording changes that resulted in better language
and in a couple of cases fixed incorrect subject/verb usage.
(From yocto-docs rev: 9106619c4264c2669be041c1e6d6124e022ab2d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert isolated a few technical errors and made some other wording
suggestions. I took the technical corrections and modified one
of his suggested wording changes.
(From yocto-docs rev: 3c6bbae05cdf2265e04d967050354ce75d62b4e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Open-source changed to open source (no hypen). Broken URL fixed for the
1.1 release notes.
(From yocto-docs rev: d34df01aef674448d4cc06cfe4ff63cab764fe64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I was not able to get to Bruce's comments he submitted to me for the
"Model" chapter of the development manual. His comments consisted of
various tweaks to terminology I used and the inclusion of some additional
technical information. This commit addresses all his comments for
the review.
(From yocto-docs rev: 206a22e1ccf077360974f18295b6df455cd50545)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The restructuring of the web site where we store manuals broke some
links that were cut-and-pasted in from older work. These slipped by
me so not changing them would direct the user to a 1.0 version of
the externally referenced manual rather than the 1.1 version.
I also got rid of a visible "WRITER'S NOTE" in the document that
was left behind.
(From yocto-docs rev: 1508826312a2fe35e5d693821a4c7737baafcb2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to add some changes to the way we invoke qemu to show multiple
processor support. I needed the qemuparam "-smp 2". There are
other minor edits as well.
(From yocto-docs rev: 508863634ce537b0936f8e44f87b90bef678c122)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the pathnames for kernel 3.0 from 2.37
(From yocto-docs rev: 220ce5fbb3663940b5940445190d30d98f58a438)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits for the kernel example.
(From yocto-docs rev: 01e9f01662efad746fbfc34820b6efeb34affecd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After greping through the documentation directory, I addressed
all the <ulink> statements that used to have yocto-1.0 in the URL.
They are now yocto-1.1.
(From yocto-docs rev: 97d160263c5905fdeaf4ec285bc5359918790581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-ran the exmaples to set up various Git repos and updated the output.
Also fixed a bad tarball name from edison-1.1 to edison-6.0
(From yocto-docs rev: 6538d588fa35986ff301a22d327af73c337ec43c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the book to clean up all areas in preparation to
running the examples again. Most changes were punctuation, manual
section reference formats, and wordings.
(From yocto-docs rev: 0d054f79c82ddc204938dea187312d1a80d0a2e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
More changes to the internal section references. Using <link> rather than
<xref> to get rid of the section number in the reference.
(From yocto-docs rev: 4351fd4898c517e25235611893b1cd059cbcc2f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I am using a certain form to reference other sections in the current
or other manual. I updated the references to follow this form.
(From yocto-docs rev: 2ba41ac2f355dbe66af19e356f9246b7485585b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the bernard examples used when creating Git repos to reflect
the edison release.
(From yocto-docs rev: d345cb08905e7f5e21b1649af5e876317cc68931)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several small things in the example as I worked through it
once again. The commit IDs changed for using the atom-pc kernel.
Also the command to build the sato image can no longer use 'live'.
(From yocto-docs rev: faff1e7f21b5059dfe708c6a3d83116c7349fe55)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title pages for the ADT, BSP, Dev, and Ref manuals to
contain the Oct 6 release date for the books. Also, changed the
author field for the BSP guide to include Tom Zanussi as well
as Richard Purdie.
(From yocto-docs rev: 301da0a5b305e4b332397bb67f6a6a77751991d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the directory where the list of know licenses are in the YP
files structure (meta/files/common-licenses).
(From yocto-docs rev: 6a8db1a5ac653dbc8730e61293221c0b0890888d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are the second edit pass for the new section.
There are some minor changes.
(From yocto-docs rev: 6c81617a2782d2f02d4900a68dd4e8c6eeb70fa1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits up through the BSP and Kernel overview sections. I also put
in place holder text and began on the application development over
section.
(From yocto-docs rev: 9c1b681ff253b469bffc355f0a938643997d85d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is an example whose output exceeds the PDF manual version's
page width. I had to artificially break the line up.
(From yocto-docs rev: d8a5714a2f8193c1efc8a7080b8f6e0744da610a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to the dev-manual-model.xml chapter for general improvements.
Also had to update the figure that shows the kernel development flow.
(From yocto-docs rev: 2aacccb03d167eac74a1b45c39a9edac160efc7f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note indicating where you can find the maintainer for yocto
code. Suggestion by Robert Berger.
(From yocto-docs rev: 8e55cc4c460582964b0267b4f43c14e7100f17fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
somehow I lost three or four changes that are credited to Robert
Berger (Community Member). I have re-introduced them here.
(From yocto-docs rev: a23564ada0e072bea63739aeb1eb5c66d595e728)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided a link to the OpenEmbedded wiki page created by Mark Hatle
that provides good guidelines on how to create well-formed commit
messages.
(From yocto-docs rev: ea7b0100a7b45c369cb67daa0705dcc5acef40c8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General pass-through for consistency in referencing sections.
Also, added Darren Hart's review comments for the "Submitting a
Change" section. I added more about the mailing lists and how to
submit a proper commit message.
(From yocto-docs rev: d9c8f5db8c862b1be724915cc43da6d12b88b97d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied consistent section referencing formats. Also cleaned up some
terminolgy for the YP Git repo.
(From yocto-docs rev: fa3cbb835b61158357d3f6fb9ebe017b9ba405cf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some indentations applied. Also, a few minor changes to some
wordings.
(From yocto-docs rev: a166f41a5bbf3590d8a2fabbee267bdd190f19dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the terms "Yocto Project Files" and "Yocto Project Build
Tree" into this development manual. They were previous defined
in the ADT manual. It makes more sense to have them where with other
terms.
(From yocto-docs rev: 2133110fd280db8cfbe998e6b46cdee0b260e777)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on submitting a change was very sparse and incomplete.
I have significantly upgraded this section to provide more details.
(From yocto-docs rev: af43bb1e4902c45afb5ac4b0f099877acd7a81a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made several edits here. There is some mystery as to which changes
are actually part of this commit. I did a 'git diff' and am only seeing
one small change. If I later find they are not there I will delete the
file and replace with a back up I saved prior to submitting this commit.
(From yocto-docs rev: 62c63b3a812eaf92ca2bffa5714a6d327ac32d64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a type and also qualified the ability of YP as a testing environment.
(From yocto-docs rev: e158615eba04709e05cccaf29238bde6c9843671)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarification on the ability for testing. The wording as
it was implied that the YP provided a complete testing framework,
which is not true.
(From yocto-docs rev: e40b39179c69b69f012f231009131b1efa7e732b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jim Abernathy ran into an error in the BSP example. The error had the
BBFILES_COLLECTIONS_mymachine in it (incorrect). It needs to be
BBFILES_COLLECTIONS.
(From yocto-docs rev: 267a385aa5ab0eb46cf583db418cbbcab1e8b89b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dave Stewart said that good coding practice is to set the variables
before any print statements. So I moved one statement above the
example printk statements.
(From yocto-docs rev: bad0537a5a6472fb3fef06de9763990a0c352e25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback per Dave Stewart added to clarify which two important
configuration files need editing.
(From yocto-docs rev: f37ade7f0d31ae6284c3bfee184c88b523f5fe69)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
these are new figures to support the "Modifying the Kernel" conceptual
section.
(From yocto-docs rev: 1a0ecc104479b54a8122e3de2b30694fac8d7e73)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Complete re-write of this section based on feedback from Dave Stewart.
Dave's comments centered around not being able to understand the overall
concepts of the Git repositories, the source areas on the host, etc.
I have added several illustrations and written around them to try and
better explain the kernel storage system in Git used by YP and how
that tranlates into host-resident code that the developer ultimately
uses and the Poky build system uses for the build.
(From yocto-docs rev: 4e37f68f77261f6519426fb81ba407c456f8d1a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on how to contribute changes to the YP resides in this
development guide. I took additional information from the YP reference
manual and merged it into the section here.
(From yocto-docs rev: 945dd29417cf51044332114e499b08fe24ef3077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The YP reference manual had an appendix that included reference or
resource information such as mailing lists, bugzilla link, and
IRC chat stuff. This type of information is best suited for the
introductory area of the development manual.
(From yocto-docs rev: a5576ed0d3360cdb32070ade6577cb7687923b10)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul sent me a bunch of minor edits and technical corrections
for the ADT, BSP, Development, and YP reference manual.
Most changes were taken as he submitted them. However, some
formatting conventions were not followed in the commits he made
to yocto-docs/paule/docs2. After merging them to my yocto-docs/master
branch I fixed some issues.
(From yocto-docs rev: 93f4ea2dee976448f623953e801a80d59736450a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These documents do not have titles when showing up on the website; set
the title tag value so that they do.
(From yocto-docs rev: baf958e3f49317689275b14dd31c6141f36c8c65)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Not sure if I need to commit these again. They are showing up in the
git status command so I might have updated them and forgot to commit
them. Doing so to be sure.
(From yocto-docs rev: 75c87592c10647ec09f42a1363a8ae123cd6e33d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a reference to the Image appendix for the description of
images. Also, added a new term "meta-toolchain."
(From yocto-docs rev: a9c1110ec7499afa669416c00bc81573fcbf920d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Comment from Bruce Ashfield indicated that this statement needed to be
SRCREV_meta_pn-linux-yocto_mymachine ?= \
"84f1a422d7e21fbc23a687035bdf9d42471f19e0"
(From yocto-docs rev: 917bfca1af7f82ad330854849e0ec4f30289543a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this example uses the CONFIG_SMP configuration. By default, this configuration is
disabled. The example shows how to use menuconfig and explains the .config file
role and how you can use it combined with menuconfig to manage multiple configuration
changes.
Thanks to Darren Hart for identifying this simple change to demonstrate how to
change the kernel configuration.
(From yocto-docs rev: c571c01b8589ad6f76e66388c3ae24a1de029f65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link does not exist yet.
(From yocto-docs rev: e74440f299eee8372090a749a301b10871eb297f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several editing corrections for various terms and phrasings based on
Scott Garman's review.
(From yocto-docs rev: a21ba80151ce82683d45cd67ddb0728d779b007a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield suggested adding a note near the explanation of creating
a bare clone that suggests if the user already has a linux yocto kernel
Git repo handy they can reference that repo in the 'git clone --bare'
command rather than referencing the upstream source repository as
a way to speed up the process.
(From yocto-docs rev: 132a9cfcef3397677b54eace7831d25f8a321b93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. now refer to the linux 2.6.39-rc1 as the 'latest upstream release
candidate available.
2. Noted where you can find the linux-2.6 kernel - in the meta-kernel-dev
area.
These changes were from Bruce Ashfield's review of an early version
of the Yocto Project Development Manual.
(From yocto-docs rev: 83d6e75e7d5f4d60040c4b7ebb0c7bb11b1b67e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37. So I am putting these
changes in to anticipate the 1.1 release.
(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to set to scalefit="1" so this figure would appear correctly in the
PDF version of the manual.
(From yocto-docs rev: 166305f39859e11f15702a8f6eb1f5a524b589c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two additional section placeholders added for changing kernel
configuration and for adding kernel recipes added to the appendix.
(From yocto-docs rev: 27c0ea3dddb652c4367b097b612edbdb76d7725d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After getting the example in kenerl example appendix working I discovered
much that was wrong in this overview. The overview attempts to generalize
all the situations for kernel modification. These include code changes,
configuration changes, and the addition of new recipes. It also includes
the situation where a developer wants to gather all the changes into a
separate layer for distribution and for when they want to push them up
the tree.
(From yocto-docs rev: 5498d7b38d3a2f14befa82b66af9919a449e0f04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues with the fact that the build process parses
all kernel .bbappend files whether they are used or not during the
build process. I added an extra build configuration note regarding
editing the .bbappend file. I noted that you either have to edit
every .bbappend file and comment out the COMPATIBLE_MACHINE statement
or simply remove all the kernel recipe append files except the one
you are interested in.
(From yocto-docs rev: ecece911a1623b9b12bb73bab50891fbdea7afbe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37'.
Also started a new note.
(From yocto-docs rev: c78a937b9df37f68beee31c51914811ddd4d771f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37.
(From yocto-docs rev: 0eb284374ef9dfb26142ae4d0254a0fe4056d0ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to tweak the viewing area to get two figures to display
correctly in the PDF version of the file.
(From yocto-docs rev: 89b2618e11c05744f54a9fbd39cd899117a2affc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure provides a conceptual look at the repos and file structures
needed to run the example. Or, for that matter, to get set up to
modify the kernel.
(From yocto-docs rev: d469449f1d416a6a96bdde297daae68a9f3094e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a major re-write of this section that touched all
aspects of it. This was necessary due to the fact I could not get
the example running because of not understanding the repo location
and branch needs to set it up.
(From yocto-docs rev: 160e66d0c8ddf11584c53306def916a45a05f62b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
still working on the kernel example.
(From yocto-docs rev: 90c8cb778d3c146f24626a681f05b88bab1e9766)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New flow suggested by Dave Stewart.
(From yocto-docs rev: 101a464f0f17f3816bfb32f6e3a5da714cc32a06)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Character does not display in PDF version.
(From yocto-docs rev: 8f9b114190257cfe5425f6e322dcfb6f03941bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the BSP flow illustration.
(From yocto-docs rev: 82ec8528c058d702402767ffa471695eb82e259c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the Docbook tags to make this an appendix.
(From yocto-docs rev: fd5658872a9d48a2ee8f0229cb0fca90961aee32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New file for the kernel example. this will be an appendix.
(From yocto-docs rev: fca7e4fbb3d1e738700349d6169d7217c04e4b31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this is now in the model chapter. Eventually the cases chapter
will disappear.
(From yocto-docs rev: fde20eede9f04899b61742b05ce73c97b2737bf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the more general BSP development information was more appropriate
in the dev-manual-cases chapter. I removed this information and left
example-specific (mostly) text.
(From yocto-docs rev: d44c0fa8bdea9a2cad51ae3ca4b861a12d9fcdf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the BSP example is now in an appendix, I re-wrote this section
to overview the case.
(From yocto-docs rev: c0d88c6050bd17d65d8fe8c8abb227998fd4c11e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section for changing the recipes was deep and complex. So I broke
it into several sub-sections.
(From yocto-docs rev: f964b7644502fe5995c57de4a7a4fff47f71cf79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the Getting your Base BSP section to reflect the example only.
Previously, there was a lot of information in there about getting BSP
files that was deemed universal and was moved to the getting started
chapter.
(From yocto-docs rev: addcbca37e3dfad27b388245a4085cd0a2747177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the YP BSP naming scheme to the general getting started section
where it talks about getting BSP files on the local system.
(From yocto-docs rev: 5b8dc20a52053341ac726fe6662152397262d5e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the example for setting up meta-intel into the getting started
section. This information is universal and needs to be isolated.
(From yocto-docs rev: d43ecd16a95fa53cafa09e933c67cacd85227021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the section that provides the universal methods of getting a local
version of the Yocto Project files and BSP files on the development system
into this section. this information needs to be referenced throughout
examples so it should be in one location.
(From yocto-docs rev: 718ea5b468d816ea4f61a6ffa4de7db396fe3ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the spacing to follow my indentation scheme for Docbook files.
(From yocto-docs rev: 6ed8cbc7dc48e5a380d27ee280fb92809b931223)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added the start of the kernel example. It is not complete.
There are other various edits made throughout the chapter as well.
(From yocto-docs rev: 39ba857b71aa643593a539d979186753fb7a9049)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the list of files to include dev-manual-cases-bsp-appendix.
(From yocto-docs rev: 0756e69e25fb4008fae592f3e06b03b3d773e0a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I decided to take the long detailed example of the BSP creation and
make it an appendix. This commit represents a simple copy of the existing
dev-manual-cases chapter. Further commits will change the text to
make it suitable as an appendix.
(From yocto-docs rev: 8c1308c4361f48ce7f7aa104cde7e6f6a820faa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed the terminology scrub for the yp files.
(From yocto-docs rev: c99f64541bf09ad7267625828894e3364dcdf937)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the chapter to try and lessen the confusion over
yp files in a git repo verses those unpacked from a tarball. Also
tried to write the example for the 1.1 release but I don't have the
real software yet and can't supply actual names of files.
(From yocto-docs rev: 2ad973bd1f17005a3922651060d025795634d222)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits to the workflow section. Also created a link to
to Bugzilla in the next section.
(From yocto-docs rev: 2e70b19d24bb4649fb525232fca9ab2e01c5ec61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
created a new section on YP terms that might be useful to the new user.
(From yocto-docs rev: ab81b6468c39b5c015c7c0654ddf8c4cfd8bd245)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the source repositories section a bit to better reflect the
overall picture of how the user finds and decides on source for YP.
Also added some punctuation to the licensing section.
(From yocto-docs rev: 12ec18e58eb4e4dc395c2161908a60d395684ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have a new understanding of the files resulting from setting up
Git repos as compared to getting files from tarballs. I changed
some wordings to help make those distinctions.
(From yocto-docs rev: b7ba9df07cf9d64f61ac73e501c253c42570970d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed "complete reference guide" to "a reference guide."
I don't really believe the Poky Reference Manual will ever really
be complete.
(From yocto-docs rev: 9afcfe03e4f3595ac78f2cda111e5bd025654595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These converted it to 1.1_M2. there were a lot of changes going from
the original example that used to bernard to 1.1_M2.
(From yocto-docs rev: c5dbc8da1ebc0b710e8133fcdd5893e33776148d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial stuff as I am working through the BSP example trying to
use git clone instead of git init per Darren Hart's suggestion.
(From yocto-docs rev: e829d761575786093c9ac1f1b901a2151011ce9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initial content in and the formatting complete. Some bad links fixed
also.
(From yocto-docs rev: 2461522b77c8240476a14aef8f3e94336419af56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial content for the chapter. Previous content was just
copied from an adt-manual chapter.
(From yocto-docs rev: 145fdacb2d080b97dc033f677fccb4fa5ab8e5d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the dev-manual-model.xml chapter to the list of chapters
to include.
(From yocto-docs rev: 513faf68cdf338b28020119266148287ea459916)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of the content is a placeholder only.
(From yocto-docs rev: 3c896a95f2d6593ef8af3d90829611122bef9aae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This content is the first cut for the chapter. The original was a copy
of some adt-manual chapter.
(From yocto-docs rev: 4a563c3ed1e82837410ed114a07e39a0ccaad6f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original content of this chapter was simply a copy of an existing
adt-manual file. I have added the content for the chapter.
(From yocto-docs rev: cac53540d8449f605ab40775c317b613711f3a80)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New content from my working chapter. Previously this file was just a
copy of one of the adt-manual chapters.
(From yocto-docs rev: a50e69c19c23808d44ac4448b30394eedbbdbdab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the make was failing due to me not following a naming convention.
I renamed all the files so they have a pre-fix of 'dev-manual' and
then deleted the old files that had a pre-fix of 'dev-man'.
(From yocto-docs rev: a4157ece0d994d5f269c94fce71c0b598bfd6a9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied from existing book and title changed.
(From yocto-docs rev: d522d738f527aac5449c7d7b60dd457c0e912c3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>