The link does not exist yet.
(From yocto-docs rev: e74440f299eee8372090a749a301b10871eb297f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several editing corrections for various terms and phrasings based on
Scott Garman's review.
(From yocto-docs rev: a21ba80151ce82683d45cd67ddb0728d779b007a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield suggested adding a note near the explanation of creating
a bare clone that suggests if the user already has a linux yocto kernel
Git repo handy they can reference that repo in the 'git clone --bare'
command rather than referencing the upstream source repository as
a way to speed up the process.
(From yocto-docs rev: 132a9cfcef3397677b54eace7831d25f8a321b93)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. now refer to the linux 2.6.39-rc1 as the 'latest upstream release
candidate available.
2. Noted where you can find the linux-2.6 kernel - in the meta-kernel-dev
area.
These changes were from Bruce Ashfield's review of an early version
of the Yocto Project Development Manual.
(From yocto-docs rev: 83d6e75e7d5f4d60040c4b7ebb0c7bb11b1b67e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Bruce Ashfield's review comments indicated that we will be using
linux-yocto-3.0 and not linux-yocto-2.6.37. So I am putting these
changes in to anticipate the 1.1 release.
(From yocto-docs rev: ecbe1c90c5aa65b2dde77ba6094b5956e37d061d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to set to scalefit="1" so this figure would appear correctly in the
PDF version of the manual.
(From yocto-docs rev: 166305f39859e11f15702a8f6eb1f5a524b589c4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two additional section placeholders added for changing kernel
configuration and for adding kernel recipes added to the appendix.
(From yocto-docs rev: 27c0ea3dddb652c4367b097b612edbdb76d7725d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
After getting the example in kenerl example appendix working I discovered
much that was wrong in this overview. The overview attempts to generalize
all the situations for kernel modification. These include code changes,
configuration changes, and the addition of new recipes. It also includes
the situation where a developer wants to gather all the changes into a
separate layer for distribution and for when they want to push them up
the tree.
(From yocto-docs rev: 5498d7b38d3a2f14befa82b66af9919a449e0f04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are some issues with the fact that the build process parses
all kernel .bbappend files whether they are used or not during the
build process. I added an extra build configuration note regarding
editing the .bbappend file. I noted that you either have to edit
every .bbappend file and comment out the COMPATIBLE_MACHINE statement
or simply remove all the kernel recipe append files except the one
you are interested in.
(From yocto-docs rev: ecece911a1623b9b12bb73bab50891fbdea7afbe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37'.
Also started a new note.
(From yocto-docs rev: c78a937b9df37f68beee31c51914811ddd4d771f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed 'linux-yocto-2.6.37.bbappend' to 'linux-yocto_2.6.37.
(From yocto-docs rev: 0eb284374ef9dfb26142ae4d0254a0fe4056d0ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to tweak the viewing area to get two figures to display
correctly in the PDF version of the file.
(From yocto-docs rev: 89b2618e11c05744f54a9fbd39cd899117a2affc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure provides a conceptual look at the repos and file structures
needed to run the example. Or, for that matter, to get set up to
modify the kernel.
(From yocto-docs rev: d469449f1d416a6a96bdde297daae68a9f3094e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I performed a major re-write of this section that touched all
aspects of it. This was necessary due to the fact I could not get
the example running because of not understanding the repo location
and branch needs to set it up.
(From yocto-docs rev: 160e66d0c8ddf11584c53306def916a45a05f62b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I separated the section that explains how to set up the poky-extras
git repository. This used to be in the kernel area right after
creating the bare clone and the copy of the bare clone. I thought
it would be better as a stand-alone bulleted item.
(From yocto-docs rev: 4ea917c7218f238e2b0d2bb377a97f4b1f5eb1f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added instruction on how to set up a bare clone of the linux yocto
kernel files and then how to create a clone of the bare clone.
Finally added a part about setting up the meta-kernel-dev repository.
This setup should do it for those that want to modify the kernel and
not have to download source files from the upstream everytime they
make a change.
(From yocto-docs rev: 90ae8249d119d5db17507eea37eb6deb0822a682)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
still working on the kernel example.
(From yocto-docs rev: 90c8cb778d3c146f24626a681f05b88bab1e9766)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new section for the example that ensures the image for qemu
is available.
(From yocto-docs rev: a3ca52cb7088ec85502b507093082f35f23befd4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed an anchor point in the Index of Downloads bulleted item for
reference from other documents.
(From yocto-docs rev: 7d4f96d20667fbf5f52e25840b39f1994b1c4cd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various things going on in the kernel example. Far from complete.
(From yocto-docs rev: 0c0548b79589a606f91bdb39e5a2ece71f4c108e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that describes how to get the local Yocto Project files
I was referencing the general section. I have added a more specific link
to the bulleted item that describes how to get these files.
(From yocto-docs rev: 2b03c4d39a83d731581a6cd63a5c9e5c7e4cb57b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the flow section for the kernel modification section I added a new
step for getting a local copy of the linux yocto kernel files. The section
indicates that you need a local Git repository of the files and then
references back to the Getting Started section for an example.
(From yocto-docs rev: 6601e06635c6f57ddbf8109cc1dfdc8a8e7f74af)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section that shows how to get various groups of files needed for
using YP I added a bulleted item to show how to clone the linux yocto
kernel files. this section will be referenced from the kernel example
flow section and the kernel example appendix.
(From yocto-docs rev: 4126d1456290d677ab8dc1d02d11aac6eb8add46)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the user should use Git commands..no probably about it.
(From yocto-docs rev: 84b0b4e8c7b6b89c81503f40ba855e9f624887c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the image description list to the Yocto Project Reference manual
where it really belonged. Appropriate references were added.
(From yocto-docs rev: fc74439c09d1f45cdfbc24d972045e574ffa91ec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made another edit pass through the high-level kernel modification flow
list. this is the list I will work from while trying to actually do
the task.
(From yocto-docs rev: ac9b2d8961abec9016c6c1e10222d0af36c4be4c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New flow suggested by Dave Stewart.
(From yocto-docs rev: 101a464f0f17f3816bfb32f6e3a5da714cc32a06)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the introduction paragraph to cast the chapter more for YP than
just generic newbie information. Also, added three screenshots for
the source areas at Dave Stewart's suggestion.
(From yocto-docs rev: 26d3c58ff6295515c593c8b0b12dc3d6952b752a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Character does not display in PDF version.
(From yocto-docs rev: 8f9b114190257cfe5425f6e322dcfb6f03941bf8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PDF version was not allowing the image to have enough room for proper
display. Increased to 8.5 inches.
(From yocto-docs rev: 425abd53eac41a9466af45e277be8b0d8202e27d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put the note about manual differences in the legalnotice area.
this produced a better looking note.
(From yocto-docs rev: 8d44a5fba7c52d5798758467e93c9c64e48d512a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Note mentions possible differences between docs in the released
tarball and docs on the website. Suggests website for latest
docs.
(From yocto-docs rev: 1675c31aa02a4daed356af4ea9c78d493a9a2597)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the BSP flow illustration.
(From yocto-docs rev: 82ec8528c058d702402767ffa471695eb82e259c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In dev-manual-model.xml I included two references: one to the
BSP Development Example and one to the Kernel Modification Example.
I had to add the target "id" stuff to both dev-manual-bsp-appendix.xml
and dev-manual-model.xml
(From yocto-docs rev: bcae1e723610e1769f0a524e3c1d9918c7cb1061)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No need for this chapter any longer. Re-org has ash-canned it.
(From yocto-docs rev: 085a514133f4326c1da372b95507a3665e8f91ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the cases chapter and added an appendix for kernel example.
(From yocto-docs rev: 60c8ec3444c08e94468ff349b676652c7f6ff0cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the Docbook tags to make this an appendix.
(From yocto-docs rev: fd5658872a9d48a2ee8f0229cb0fca90961aee32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New file for the kernel example. this will be an appendix.
(From yocto-docs rev: fca7e4fbb3d1e738700349d6169d7217c04e4b31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this is now in the model chapter. Eventually the cases chapter
will disappear.
(From yocto-docs rev: fde20eede9f04899b61742b05ce73c97b2737bf3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added structure to contain sub-sections for system (BSP and kernel)
and application overviews.
(From yocto-docs rev: 028f65219b001081d221d63f368ff06066a95a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "models" chapter is going to be the overview section for the cases.
Thus, the cases chapter will disappear. This is a first step in that
direction.
(From yocto-docs rev: fe3985db8e1dbc7bff6565d3624bccac0f809621)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some of the more general BSP development information was more appropriate
in the dev-manual-cases chapter. I removed this information and left
example-specific (mostly) text.
(From yocto-docs rev: d44c0fa8bdea9a2cad51ae3ca4b861a12d9fcdf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because the BSP example is now in an appendix, I re-wrote this section
to overview the case.
(From yocto-docs rev: c0d88c6050bd17d65d8fe8c8abb227998fd4c11e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section for changing the recipes was deep and complex. So I broke
it into several sub-sections.
(From yocto-docs rev: f964b7644502fe5995c57de4a7a4fff47f71cf79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the Getting your Base BSP section to reflect the example only.
Previously, there was a lot of information in there about getting BSP
files that was deemed universal and was moved to the getting started
chapter.
(From yocto-docs rev: addcbca37e3dfad27b388245a4085cd0a2747177)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the YP BSP naming scheme to the general getting started section
where it talks about getting BSP files on the local system.
(From yocto-docs rev: 5b8dc20a52053341ac726fe6662152397262d5e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the example for setting up meta-intel into the getting started
section. This information is universal and needs to be isolated.
(From yocto-docs rev: d43ecd16a95fa53cafa09e933c67cacd85227021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved the section that provides the universal methods of getting a local
version of the Yocto Project files and BSP files on the development system
into this section. this information needs to be referenced throughout
examples so it should be in one location.
(From yocto-docs rev: 718ea5b468d816ea4f61a6ffa4de7db396fe3ed4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the spacing to follow my indentation scheme for Docbook files.
(From yocto-docs rev: 6ed8cbc7dc48e5a380d27ee280fb92809b931223)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added the start of the kernel example. It is not complete.
There are other various edits made throughout the chapter as well.
(From yocto-docs rev: 39ba857b71aa643593a539d979186753fb7a9049)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the list of files to include dev-manual-cases-bsp-appendix.
(From yocto-docs rev: 0756e69e25fb4008fae592f3e06b03b3d773e0a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I decided to take the long detailed example of the BSP creation and
make it an appendix. This commit represents a simple copy of the existing
dev-manual-cases chapter. Further commits will change the text to
make it suitable as an appendix.
(From yocto-docs rev: 8c1308c4361f48ce7f7aa104cde7e6f6a820faa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completed the terminology scrub for the yp files.
(From yocto-docs rev: c99f64541bf09ad7267625828894e3364dcdf937)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through the chapter to try and lessen the confusion over
yp files in a git repo verses those unpacked from a tarball. Also
tried to write the example for the 1.1 release but I don't have the
real software yet and can't supply actual names of files.
(From yocto-docs rev: 2ad973bd1f17005a3922651060d025795634d222)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits to the workflow section. Also created a link to
to Bugzilla in the next section.
(From yocto-docs rev: 2e70b19d24bb4649fb525232fca9ab2e01c5ec61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
created a new section on YP terms that might be useful to the new user.
(From yocto-docs rev: ab81b6468c39b5c015c7c0654ddf8c4cfd8bd245)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I re-wrote the source repositories section a bit to better reflect the
overall picture of how the user finds and decides on source for YP.
Also added some punctuation to the licensing section.
(From yocto-docs rev: 12ec18e58eb4e4dc395c2161908a60d395684ab3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have a new understanding of the files resulting from setting up
Git repos as compared to getting files from tarballs. I changed
some wordings to help make those distinctions.
(From yocto-docs rev: b7ba9df07cf9d64f61ac73e501c253c42570970d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed "complete reference guide" to "a reference guide."
I don't really believe the Poky Reference Manual will ever really
be complete.
(From yocto-docs rev: 9afcfe03e4f3595ac78f2cda111e5bd025654595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These converted it to 1.1_M2. there were a lot of changes going from
the original example that used to bernard to 1.1_M2.
(From yocto-docs rev: c5dbc8da1ebc0b710e8133fcdd5893e33776148d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial stuff as I am working through the BSP example trying to
use git clone instead of git init per Darren Hart's suggestion.
(From yocto-docs rev: e829d761575786093c9ac1f1b901a2151011ce9d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initial content in and the formatting complete. Some bad links fixed
also.
(From yocto-docs rev: 2461522b77c8240476a14aef8f3e94336419af56)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial content for the chapter. Previous content was just
copied from an adt-manual chapter.
(From yocto-docs rev: 145fdacb2d080b97dc033f677fccb4fa5ab8e5d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the dev-manual-model.xml chapter to the list of chapters
to include.
(From yocto-docs rev: 513faf68cdf338b28020119266148287ea459916)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This version of the content is a placeholder only.
(From yocto-docs rev: 3c896a95f2d6593ef8af3d90829611122bef9aae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This content is the first cut for the chapter. The original was a copy
of some adt-manual chapter.
(From yocto-docs rev: 4a563c3ed1e82837410ed114a07e39a0ccaad6f7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The original content of this chapter was simply a copy of an existing
adt-manual file. I have added the content for the chapter.
(From yocto-docs rev: cac53540d8449f605ab40775c317b613711f3a80)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New content from my working chapter. Previously this file was just a
copy of one of the adt-manual chapters.
(From yocto-docs rev: a50e69c19c23808d44ac4448b30394eedbbdbdab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the make was failing due to me not following a naming convention.
I renamed all the files so they have a pre-fix of 'dev-manual' and
then deleted the old files that had a pre-fix of 'dev-man'.
(From yocto-docs rev: a4157ece0d994d5f269c94fce71c0b598bfd6a9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Copied from existing book and title changed.
(From yocto-docs rev: d522d738f527aac5449c7d7b60dd457c0e912c3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>