It doesn't make sense to create zero-sized partitions so assume user
error and notify the user they should be using a non-zero --size for
partitions that don't specify a --source.
(From OE-Core rev: 3231562c3c9f8173ddcc0812001aadf0988c8892)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a 'wic kickstart' help section to make it easy for users to access
the kickstart reference without having to go to an external website.
(From OE-Core rev: 136137ec1c124aee89d2120abded60a5cf0562b0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a general overview of wic to the help system as 'wic overview',
along with some introductory examples.
(From OE-Core rev: fa108caaa53878152e4856d32ce1ab7fe3802287)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add vfat as a supported rootfs type (in addition to the current
ext2/3/4 and btrfs support).
vfat partitions can now be created using --source rootfs along with
--fstype=vfat, or without --source but specifying a --size.
(From OE-Core rev: d9efc110fd73822629b2a3326761f2256b9f23b0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current code uses msger.debug() to note errors, effectively
squelching them if --debug isn't used. Apparently this is because it
can return non-zero for some loop device failures. We don't care
about loop devices, and not paying attention to the error code
actually results in invalid images, so error out on parted failures as
we should be.
(From OE-Core rev: b1c68e5446080f0743f7f8a530f3b00f90c8717d)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a category for help topics with an initial help topic discussing
source plugins.
(From OE-Core rev: a3dbe46dd28a6fd9e6c21f6bbb6a12578df9dff3)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a partition specified in a .wks file specifies a nonexistent
--source, print an error to that effect and exit. The error text also
points the user to a command listing valid sources, and help on adding
a new source plugin.
(From OE-Core rev: 4dff6945d2606cebc0ab26e877c5d8c7b457e179)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add both short and long text for the new 'wic list source-plugins'
command.
(From OE-Core rev: 4f20acc10b18c7353bd73f253943372dacd957ca)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a 'wic list source-plugins' command enabling users to get a list
of valid partition --sources. This is useful not only for determining
sources to use in .wks partition statements, but also for making sense
of errors in .wks partition processing.
(From OE-Core rev: 37db9423e7872012fabde67e8858db5b512832f6)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been copied and pasted around and is not needed, simply drop it.
The defaults in the recipe work just fine.
(From meta-yocto rev: 037bce9a5f196df3cded9dfe6200188c1dd1d84a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update qemu tune definitions to match changes in main qemu machines.
[YOCTO #6482]
(From meta-yocto rev: 0d78ffd509c6caba6c74c6e75c485fb8d923cd31)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a '\n' to the last line of the file to fix:
No newline at end of file
(From meta-yocto rev: 58cc5c502bd0309feed65ab7836ed8fbaab6ced9)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several of these scripts were using duplicated code (and slightly
different methods) to find the path to bitbake and add its lib
subdirectory to the Python import path. Add some common code to do this
and change the scripts to use it.
Fixes [YOCTO #5076].
(From OE-Core rev: 0b5e94e168819134dcda0433c8ae893df4ab13ce)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If wic is running as raw mode, it's better to check if BBLAYERS
is valid before inspect it.
No functional changes.
(From OE-Core rev: a3ee9cc7aebaecfa2223552a2c1865a9337de664)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix 'for' statement identention so plugin type directory will be
added only once in layers_dirs list.
No functional changes.
(From OE-Core rev: ba88329115a3d6f964febcbf554af8391e1b84a1)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Plugins are looked in 'scripts/lib/mic/plugins/[type]/' directory on all
BBLAYERS variable returned by bitbake environment. If found, it will
be load at runtime.
The user could create your own plugin and keep it inside its layers. For
now the path must be <layer-dir>/scripts/lib/mic/plugins/[type]/. Where
'type' could be 'imager' or 'source'.
(From OE-Core rev: bb6f5d7de1c7ce2680874a74949903db0f5bb91a)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
.wks file are looked in 'scripts/lib/image/canned-wks' directory on all
BBLAYERS variable returned by bitbake environment. If found, it will
be used.
The user could create your own .wks and keep it inside its layers. For
now the path must be <layer-dir>/scripts/lib/image/canned-wks.
(From OE-Core rev: 1f3e312211f277a1befd707a59a0c0a9bf6cbcbc)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic command-line param --rootfs-dir gets extended to support
multiple directories and image names. Each '--rootfs-dir' could be
connected using a special string. This special string is a image
name which gets expanded by bitbake to get 'IMAGE_ROOTFS' or
a rootfs-dir path pointing to rootfs directory. Like this:
wic create ... --rootfs-dir rootfs1=core-image-minimal \
--rootfs-dir rootfs2=core-image-minimal-dev
.wks:
part / --source rootfs --rootfs-dir="rootfs1" --ondisk sda --fstype=ext3 \
--label primary --align 1024
part /standby --source rootfs --rootfs-dir="rootfs2" \
--ondisk sda --fstype=ext3 --label secondary --align 1024
(From OE-Core rev: 58417093d7ce83c8a2f683a356fddc23aaee5e8e)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This helper is used by source plugins to get specific bitbake
variable.
(From OE-Core rev: b8e51f73bc8e67ca60b7dd8d67091257aad62efd)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move find_bitbake_env_line() since they're going to need to be
accessible from source plugins.
(From OE-Core rev: d881ec6136255fd0f4a8cf36f9ce148ade02c103)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From meta-yocto rev: 5021839af713cb34bea5888981f2184104b6d35e)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add 3.14 kernel support, and remove support for 3.4.
(From meta-yocto rev: 342dce5873a9f1844fd7ce52a1c2656dcfb43053)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The wic command-line param --rootfs-dir gets generalized to support
multiple directories. Each '--rootfs-dir' could be connected using a
special string, that should be present in .wks. I.e:
wic create ... --rootfs-dir rootfs1=/some/rootfs/dir \
--rootfs-dir rootfs2=/some/other/rootfs/dir
part / --source rootfs --rootfs-dir="rootfs1" --ondisk sda --fstype=ext3 \
--label primary --align 1024
part /standby --source rootfs --rootfs-dir="rootfs2" \
--ondisk sda --fstype=ext3 --label secondary --align 1024
The user could use harded-code directory instead of connectors. Like this:
wic create ... hard-coded-path.wks -r /some/rootfs/dir
part / --source rootfs --ondisk sda --fstype=ext3 --label primary --align 1024
part /standby --source rootfs --rootfs-dir=/some/rootfs/dir \
--ondisk sda --fstype=ext3 --label secondary --align 1024
(From OE-Core rev: 719d093c40e4c259a4c97d6c8a5efb5aeef5fd38)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a .wks has more than one ROOTFS_DIR it's better to report
all ROOTFS_DIR that was used to create the image.
(From OE-Core rev: a8762f3be215678a6806cabe49647083f42323a8)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The '--rootfs-dir' option is optional and only takes efect is a
partition is set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ...
So '--rootfs-dir' is used instead of bitbake ROOTFS_DIR variable or
'-r' param.
(From OE-Core rev: d486db593e6643bd10b8fe90257d547a9f341043)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a partition from .wks file is set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ... --label \
--label secondary
This means that 'rootfs' must use '<special rootfs>' as rootfs and
the default partition filename in /var/tmp/wic/build/ will be create
using the '--label' as part of the name. E.g:
/var/tmp/wic/build/rootfs_secondary.ext3
(From OE-Core rev: c7efb3a21618ce3069811042279a0d898237ac0f)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The do_prepare_partition() method from RootfsPlugin class need
to know what will be the rootfs_dir. This makes sense when .wks
file has a partition set up like this:
part /standby --source rootfs --rootfs-dir=<special rootfs> ...
then do_prepare_partition() will work with the correct rootfs.
(From OE-Core rev: 6042b097a8fc24f2b85eb9848fb007a3c6c090a9)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the 'rootfs' case when internal call code is used and
replace to call the general-purpose plugin.
For now RootfsPluing class continues to invoke prepare_rootfs()
method from Wic_PartData. However RootfsPlugin could implement them.
(From OE-Core rev: 26cd93b79318cbfaebb971d1e728041904e015f1)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement RootfsPlugin class. The do_prepare_partition() method
is implemented using code in Wic_PartData class.
This class have 'rootfs' name, which is the name that should
be used in the --source parameters of the .wks partition commands.
(From OE-Core rev: 68dd66849bbaca6e3a0cf00beec0dba1c08e9070)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake_env_command will choke if it isn't given an image, make sure
it does the right thing in that case.
(From OE-Core rev: a17f879cd5bc7401597ccee908801f8e3efa34c0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The special case when wic is set up to use SD/MMC-Cards in place
of sdX disks is not handled properly.
Append 'p' to the rootdev when disk is SD/MMC-Cards fix this situation.
(From OE-Core rev: 3a95c4549f743aa47456c76e687a863c64c7a7f4)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The switchover from populate-exfs.sh to mke2fs forgot to preserve
pseudo, add it back.
(From OE-Core rev: 032309928f931b32cf63a0ebf174de029ba17401)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-core commit f3a95ca6886b55e5819b068bdbd2cceb882d91a6 removed the
populate-extfs.sh. So mke2fs should be used to create ext2/3/4 image.
(From OE-Core rev: 4dea928eef325364922b1e0cbabc2a581356e804)
Signed-off-by: João Henrique Ferreira de Freitas <joaohf@gmail.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Because exec_cmd() return values can in certain cases be non-zero yet
non-fatal, we don't want to automatically make them fatal (though
there should at least be a warning in such cases, which this patch
also does); non-zero return values are definitely fatal however if
they mean that a native command wasn't found, so have
exec_native_cmd() check the return value of exec_cmd() for that case,
and bail out if so.
[YOCTO #5835]
(From OE-Core rev: 43ac6e3216c5d985d6f90a28e727e397df616267)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The path exported in exec_native_cmd() includes bogus 'PATH=' which
means the native paths for all but the first will be ignored.
(From OE-Core rev: e10c1102d958ffc6b521fb36c6bc51d896503218)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of simply creating partitions large enough to contain the
contents of a --source partition (and adding a pre-specified amount of
padding), use the --size used in the partition .wks statement.
If --size isn't used, or is smaller than the actual --source size,
retain the current behavior.
(From OE-Core rev: 23b6c5ea4d48cdf731e5202991961a0e4b10ff29)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hook up the existing --debug option to toggle the wic debug loglevel,
which is indispensible when things go wrong, and make it easy to use
from the command-line.
(From OE-Core rev: a5ece6f37656fa56b97fd8faf52917345238d015)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove all the Wic_PartData and DirectImageCreator code now
implemented by the BootimgEFIPlugin and BootimgPcbiosPlugin plugins,
as well as all the special-cased boot_type code, significantly
cleaning up the code.
Replace the calling code with general-purpose plugin invocations, in
essence calling the appropriate implementations at run-time based on
the --source value in effect.
Change the directdisk.wks and mkefidisk.wks scripts to make use of the
new plugins.
(From OE-Core rev: 43558610a5793888ff2b18bd3a27c7ab558e5ad0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Implement the BootimgPcbiosPlugin and BootimgEFIPlugin SourcePlugin
classes. The configure/prepare_partition() methods are implemented
using code derived from similar code in the Wic_PartData class.
These classes have the corresponding names 'bootimg-pcbios' and
'bootimg-efi', which are the names that should be used in the --source
parameters of the .wks partition commands.
(From OE-Core rev: 6e147488b40f730e07f1e0f232083ed75388daa0)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Define the SourcePlugin class, which is the class that should be
subclassed to create a 'source' plugin.
'Source' plugins provide a mechanism to customize various aspects of
the image generation process in wic, mainly the contents of
partitions.
The initial version of wic defined a --source param for partitions,
which was in the first revision hard-coded to two possible values:
rootfs and bootimg.
This patch essentially removes the hard-coded --bootimg param and
replaces it with a plugin system that maps the value specified as
--source to a particular 'source' plugin instead.
A 'source' plugin is created as a subclass of SourcePlugin and the
plugin file containing it is added to scriptsl/lib/mic/plugins/source/
to make the plugin implementation available to the wic implementation.
When the wic implementation needs to invoke a partition-specific
implementation, it looks for the plugin that has the same name as the
--source param given to that partition. For example, if the partition
is set up like this:
part /boot --source bootimg-pcbios ...
then the methods defined as class members of the plugin having the
matching .name class member would be used.
To be more concrete, here's the plugin definition that would match a
'--source bootimg-pcbios' usage, along with an example method that
would be called by the wic implementation when it needed to invoke an
implementation-specific partition-preparation function:
class BootimgPcbiosPlugin(SourcePlugin):
name = 'bootimg-pcbios'
@classmethod
def do_prepare_partition(self, part, ...)
If the subclass itself doesn't implement a function, a 'default'
version in a superclass will be located and used, which is why all
plugins must be derived from SourcePlugin.
This scheme is extensible - adding more hooks is a simple matter of
adding more plugin methods to SourcePlugin and derived classes. The
code that then needs to call the plugin methods the uses
plugin.get_source_plugin_methods() to find the method(s) needed by the
call; this is done by filling up a dict with keys containing the
methon names of interest - on success, these will be filled in with
the actual methods. fPlease see the implementation for examples and
details.
Note that a source plugin need not restrict itself to methods that
apply directly to partitions - methods can also be defined for higher
level processing such as at the 'disk' level. The
get_default_source_plugin() of DirectImageCreator allows the default
source plugin to be retrieved; by default this is set to be the same
plugin used for the /boot partition, but that can be overridden by
specifying a different --source and therefore different plugin on the
'bootloader' line. This isn't ideal, but it avoids forcing a new
high-level object to be defined for that purpose.
Note that the '--source rootfs' param remains as its current
hard-coded value, which is just the rootfs to be used to populate the
partition - by default, that's just the value of the bitbake
ROOTFS_DIR variable (or whatever was passed in using the -r param).
Note that this also could also be overridden by creating a source
plugin using a different name; at this point, unlike with bootimg,
there's been no need to do so.
(From OE-Core rev: 663833d8ecccb36ab42150bc5c9c00be79fa5b93)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a new wic-specific bootloader subclass so we can add a --source
param to hang non-partition plugin off of.
By default, the bootloader gets the /boot partition source plugin, but
this can be overridden by the --source bootloader param if needed.
(From OE-Core rev: f90e4097c4e69d4f61c69923cb5d1ebb6b74d2ff)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add get_bitbake_var() and bitbake_env_lines() functions for use by
plugins, which will need access to them for customization.
(From OE-Core rev: f0bb47b0d7ab6520c105ce131844269172de3efd)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Move a couple items into a more common location since they're going to
need to be accessible from source plugins.
(From OE-Core rev: 95ca523949e838850b5afa090ba16f91b8557c12)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the x86_64 architecture bsp creator to include choices for core2
and corei7 tune files.
(From meta-yocto rev: 06a16db32eae5b2280642643009fa653dc6f7839)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the substrates to use x86-base instead of ia32-base and core2-64
instead of x86-64. Update the core2 bit to include the DEFAULTTUNE to be
explicit.
(From meta-yocto rev: 3ccc079192ca147382231f0379bae1d04d47a89c)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The qemu BSPs were picking up the wrong interfaces file, resulting in
some erratic interface behavior seen with qemu-based BSPs - this fixes
the problem.
[YOCTO #5636]
(From meta-yocto rev: bbc3d56d6ec28b4cd92874fe4f98e1cd499415be)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If the build environment is misconfigured (e.g. a bad path
for a layer in bblayers.conf) the yocto-bsp script crashes with a
standard python error, not very explicit. This fixes the problem.
Signed-off-by: Bastien JAUNY <bastien.jauny@gmail.com>
(From meta-yocto rev: 4a8e80b812eebdc1c9570b5d88aa0f3b34824b68)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This seems to be an obsolete check - we don't have any problems with
image creation under selinux, so remove it.
(From OE-Core rev: 12e81eceab9e0a483765566ad3791b14718195b5)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove unnecessary pseudo exports i.e. PSEUDO_DISABLED and move the
setup to the top-level prepare_rootfs().
(From OE-Core rev: 4bf11cd7d7301da664c098c8a0ae9c0294a6f423)
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tom Zanussi
Richard Purdie
Robert Yang
Paul Eggleton
João Henrique Ferreira de Freitas
Otavio Salvador
Darren Hart
Tom Zanussi
Bastien JAUNY