The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
There was a TBD section here that needed filling out.
(From yocto-docs rev: 84efce1622dec2782aadfb9cc9338c3f7aab1472)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the new section "Using an "In-Tree" defconfig File"
section. This section addresses the ability to not use the
default location for defconfig files, which is usually in the
metadata layer. The section describes how to use the
KBUILD_DEFCONFIG variable.
Fixes [YOCTO #7474]
(From yocto-docs rev: d68f7b47d974d94177b344247056778742f57786)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Kernel" section did not address "defconfig"
files. In my opinion, this is a hole in the docs for this section.
I added a new section titled "Creating a defconfig File" that is a
sub-section of the "Configuring the Kernel" section.
Additionally, I added a brief sentence in the introductory paragraph
to include the fact that this new information exists.
Finally, I included the bitbake command that ensures that the
proper configuration steps are minimally run before a user attempts
to use bitbake to get into menuconfig.
Fixes [#YOCTO 7474]
(From yocto-docs rev: 13c0c7dddca59474ef65dacc12f0bfaa38933887)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
The "Generating Configuration Files" section has a procedure that
starts with a step to complete a build at least through the
kernel configuration task. This is needed but we could use a
bit of explanation here. I added some rationale behind why you
should do this.
(From yocto-docs rev: 63df3474f4ed211dd6b7d1cf4f4e90bbc92c2595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been deprecated a while and Paul Eggleton suggested
we finally remove it from the glossary. I removed it and also
took away the two links from where the variable was referenced
in a couple spots in the migration section.
(From yocto-docs rev: 2b3c762428bd9ca64087ba6359c4eb5fb5a3db84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Added a new description for this variable. Based it on information
given to me by Paul Eggleton.
(From yocto-docs rev: eb0101027ed18b6bae2d80166b73b41ee1ebeb9f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added better wording to show that you use spaces to separate
multiple features.
(From yocto-docs rev: b21d73acb23e0e3b78cff332fdc4a09166eb7392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section needed some more information. It referenced the yocto-kernel
script and menuconfig. I added references to the appropriate areas of
YP documentation for these. I also changed wordings to that it is
apparent that .config is created by menuconfig when changes are saved.
(From yocto-docs rev: bd1a3f6fa0268635f52bc77d9b35b5110b18a9f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way to include tcf-agent now in an image that you are going to
remotely deploy and debug using the Eclipse IDE is to simply include
the eclipse-debug image feature as part of the image. I updated the
section around getting images to reflect this simple method.
Reported-by: Adam Lee <adam@gumstix.com>
(From yocto-docs rev: 9aec91d7f4fda558baa0e8a0290b42d76e735c63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #7632]
Looked for, updated, and added (if necessary) the following
variables:
* ROOTFS_PREPROCESS_COMMAND
* ROOTFS_POSTPROCESS_COMMAND
* SDK_POSTPROCESS_COMMAND
* POPULATE_SDK_POST_TARGET_COMMAND
* POPULATE_SDK_POST_HOST_COMMAND,
* IMAGE_POSTPROCESS_COMMAND
* IMAGE_PREPROCESS_COMMAND
* ROOTFS_POSTUNINSTALL_COMMAND
* ROOTFS_POSTINSTALL_COMMAND
Each of these variables no longer accepts arbitrary shell commands but
rather functions. The wordings now support that behavior.
Also, updated the migration section for going to 1.6 release to note
this change.
(From yocto-docs rev: e1ab48f7def9d1eb080e007b88f75172470b8007)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied a little more information to this section to help
round out the variable explanations. Part of the change involved
adding PARALLEL_MAKEINST to the list of scaled variables.
I had left that variable off. Also added a new trade-off.
(From yocto-docs rev: 3d85d5385c03841c17dd33afb94c110edc12170f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some more detail to these two variables. The system sets
them according to the perceived number of cores. These default
setting are cool for single socket systems. However, if you
have some big system with a lot of physical CPUs, you might want
to cap off the values at 20. This is according to Darren Hart.
I also put in some cross-references to the "Speeding Up the Build"
section.
(From yocto-docs rev: 20eafc8290f46d8deea84dd6ff721b65cb8a1463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7665]
Added descriptions in the glossary for the following variables:
* SDK_HOST_MANIFEST
* SDK_TARGET_MANIFEST
* SDK_VERSION
* TOOLCHAIN_OUTPUTNAME
(From yocto-docs rev: d8a7e3443d33d02d88e9d603dcff917a5508ae17)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the "Optionally Building a Toolchain Installer" section
to emphasize using 'bitbake <image> -c populate_sdk' as the method
for building outa toolchain. Before the change, equal emphasis was
put on for this preferred method and the 'bitbake meta-toolchain'
method.
(From yocto-docs rev: 447ad6167570bf1bd227771153de421d1154443d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7524]
The "Writing New Tests" section needed more clarification in the first
paragraph. One requirement is that minimally, an empty __iniit_.py
file must exist in the runtime directory.
(From yocto-docs rev: 519d0ff95e2ffbdb615d6dc27a6c11b393eb4b53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, added a cross-reference link from the archiver.bbclass section
to the new description.
(From yocto-docs rev: f825ba932970e9d62d335f249365a34b2992b6cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use usermod here not useradd.
(From yocto-docs rev: 7f4a5523c14304985ab8b277fd5010fd22903dea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are the gummiboot tests recently removed from OE-Core, with the
following changes:
* Make them use MACHINE = "genericx86-64" instead of "nuc" and remove
all usage of meta-intel
* Use DEPLOY_DIR instead of assuming build directory will be in the
default path relative to COREBASE
* Fix build test to actually check if the file was created as part of
the test instead of possibly being around from a previous build
* Fix wic test to actually check the output to find the name of the
.direct file that wic has created, instead of passing if any .direct
file happens to exist in /var/tmp/wic
(We can now add these in this layer courtesy of Chris Larson's OE-Core
commit 182b8ed9f26ed8b6a8eb6dcaec82db9aca14b010).
(From meta-yocto rev: 8e945e39327869c6b53959c5eb324ba3e4cb0b20)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since shell scripts run with 'set -e' the final exit at the end of the
script can only be returning 0. However, for correctness and to follow
the original intention of the 'cleanup' commands, let's fix the typo
and return the success of the last shell function rather than the
success of unhooking the exit trap handler.
(Bitbake rev: bef724057f1ea81571dd3ac5a9cf862f818434b5)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix error '[[: not found' if /bin/sh is not bash.
This issue was introduced by the recent addition of tar_ignore_error.patch
to the opkg-utils recipe.
(From OE-Core rev: 2cf2242fc30b3d1ceb538ff5106e000cd888652e)
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change
ensures that if another libc is used, symlinks are present such that the
compiler can be found. The base version is always assumed to be "glibc"
with symlinks from musl and uclibc compiler names.
This means gcc-cross-canadian is consistent regardless of which libc is
selected when its build in multimachine builds.
[YOCTO #8025]
(From OE-Core rev: 83ead626c0da75edec2833ffb1a29011ec7b83d2)
(From OE-Core rev: ee16cb0a3f40384f509083f0ef3f36b68f73b7cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change ensures
that if another libc is used, the compiler correctly selects the right one.
[YOCTO #8025]
(From OE-Core rev: da2e92e256054b137a1646fdad1fe1a47ba3215a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If start() returns False due to create_socker() failing, stop() may still get
called and currently this gives a track back since server_socket doesn't exist.
Avoid this.
(From OE-Core rev: 26fb69ec663afd05134822dc5e48fc8928ea5bf1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently nativesdk-qt4-tools can't be built if the DISTRO_FEATURES doesn't contain x11.
To make it build we add a dependency to x11 only if the feature is activated.
(From OE-Core rev: 7216116c9552e812d8c75c0687223f9a84204a28)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With gcc 5, we need to disable the PIE flags for more recipes in order
to have successful builds.
(From OE-Core rev: ec2f1b5af102ab6a8fcc23bf115c8f0451ab7eb8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging purposes, 5 lines often isn't useful as it doesn't even
cover a full backtrace. Show 25 instead.
(From OE-Core rev: 5b3ff562b2c56df301fc402c8b84420d8d4e5705)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We've had a few cases on the autobuilder where we've lost logs of
the boot and been unable to debug it further. Show this information
onto the console to be more useful.
(From OE-Core rev: 5302b7b8fa1349ae99040fe8fdcc4e42c722cc10)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use the common code we now have to run QEMU instead of running it
ourselves, avoiding reliance on the machine showing up at 192.168.7.2.
This also makes a copy of the image rather than using -snapshot so if we
need to inspect the image after a failure, we can.
Fixes [YOCTO #7928].
(From OE-Core rev: 3d3748a237bb06ce7d9520bf485ef0c6cf1adc86)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These tests were _deleting_ meta-intel if it happened to appear under
COREBASE, which could have been catastrophic if there was any work in
progress in that directory. It turns out we don't even need meta-intel,
but we do need a machine that's set up appropriately (e.g.
genericx86-64). Tests that involve layers outside of OE-Core don't
really belong in OE-Core, and genericx86-64 is in meta-yocto-bsp;
however we will soon have the capability to have selftest tests in other
layers, so remove this here so we can add a fixed version in
meta-yocto-bsp after that happens.
(From OE-Core rev: 7bf55e7b8036bb09f49ee0987fd002ec25e3e9e0)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use our new runqemu function
* Don't hard-code the RPM4 version
* Double-check the native version is RPM4
* Check that an rpm 4.x package is in the image manifest (this isn't
strictly necessary, but "belt-and-braces" and it serves as an example
of how to do that)
* Check that the database is working on the target
* Ensure the image actually has openssh in it so we can connect to it
Initial runqemu adaptation by Richard Purdie <richard.purdie@linuxfoundation.org>
Part of the fix for [YOCTO #7994].
(From OE-Core rev: 80289106423746b7d7fd4c4fd181ffbae93f71d1)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* We need to set EXTRA_IMAGE_FEATURES outright or existing values will
affect the test
* For test case 1107 we need "empty-root-password" to match the behaviour
described in the test case
* For test case 1115 we shouldn't be able to connect as root with the
features we are setting
Test cases 1107 and 1115 have been updated in Testopia to match.
(From OE-Core rev: f1e66398eaba495ea6d8d39e2b489e594ac88a0e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Create a runqemu function which uses the QemuTarget() code from
oeqa.targetcontrol to setup the QEMU instance, with all of the added
robustness that that gives us. To do this, a datastore is needed for the
recipe in question (core-image-minimal) so we do the work needed to set
this up. We then use this runqemu function within the imagefeatures
tests instead of a hand-rolled implementation.
We can then use SSHControl to run the SSH tests rather than rolling our
own code to do that as an added bonus.
Fixed and extended by Paul Eggleton <paul.eggleton@linux.intel.com>.
Part of the fix for [YOCTO #7994].
(From OE-Core rev: 7d18d1169204ee80f1c00b35998f10fffaefa107)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we use this outside of testimage we don't have a task log; so let's
just explicitly write the log output to a file all the time so it's
always there to look at (particularly useful when runqemu exits
immediately with an error.)
(From OE-Core rev: 09b7ed39df150257cfe2eb55a8f8c7475e73217e)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Don't wait for QEMU to start if it's never going to (because runqemu
exited with an error)
* Don't error out if killing the process fails with "no such process"
(we don't care if it's already dead)
(From OE-Core rev: 1789b89de6c4642464abadd9f8a4746385e6b4a7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
runqemu-internal runs stty to return the terminal to its previous state
in case QEMU hasn't done that properly (which it at least used to do
when it crashed). For some reason I have yet to determine, stty blocks
(on tcsetattr() according to gdb) when run within QemuRunner() under
oe-selftest, with the result that we always wait until the timeout and
then we kill the script, which adds an extra delay after QEMU is
stopped. Naturally you would assume that this is something to do with
the nature of the terminal under which it is being run; however no
amount of playing around with stdin/stdout/stderr seemed to fix the
issue, apart from passing in subprocess.PIPE as stdin which makes stty
error out with "stty: standard input: Inappropriate ioctl for device". I
was also unable to come up with a reliable test for the terminal which
we could use inside runqemu-internal to avoid calling stty. For now, go
with the stdin=subprocess.PIPE workaround to at least avoid the delay
with minimal ill effect.
(From OE-Core rev: a058d07cd7251749fa9c1c8eca3caa80144664fe)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OE-Core commit 519e381278d40bdac79add340e4c0460a9f97e17 unfortunately
broke logging in two different ways:
1) it prevented logging to the task log from working within bitbake
-c testimage. This is due to the logger object being set up too early
which interferes with BitBake's own logging. If we prefix the name
with "BitBake." everything works (and we don't need to set the
logging level).
2) Additionally because it called the log functions on the logging
module and not the logger object it set up, this caused the
oe-selftest logging to start printing everything from that point
forward.
Fix these two issues and return us to the desired behaviour for
do_testimage.
(From OE-Core rev: 429b1971be06d5146bb1c14f4697966cddab3b33)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The test directory might not exist at this point so just go ahead and
create it.
(From OE-Core rev: 7ef86ce62b52f0f3d0c51e3c20d7b4f37025bf41)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In particular, this allows us to use code from bitbake's bb module
(such as tinfoil).
(From OE-Core rev: 5ca91cd0b56eb2da80c781fb46ae0b600c3f1eb9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is provided for use by subclasses.
(From OE-Core rev: 95330664826e80c56360645ea90b59d265c2c50e)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
André Draszik
Paul Eggleton
Andre McCurdy
Cristian Iorga
Dominic Sacré
Richard Purdie
Pascal Bach
Christopher Larson