The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
There was a TBD section here that needed filling out.
(From yocto-docs rev: 84efce1622dec2782aadfb9cc9338c3f7aab1472)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been deprecated a while and Paul Eggleton suggested
we finally remove it from the glossary. I removed it and also
took away the two links from where the variable was referenced
in a couple spots in the migration section.
(From yocto-docs rev: 2b3c762428bd9ca64087ba6359c4eb5fb5a3db84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Added a new description for this variable. Based it on information
given to me by Paul Eggleton.
(From yocto-docs rev: eb0101027ed18b6bae2d80166b73b41ee1ebeb9f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added better wording to show that you use spaces to separate
multiple features.
(From yocto-docs rev: b21d73acb23e0e3b78cff332fdc4a09166eb7392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #7632]
Looked for, updated, and added (if necessary) the following
variables:
* ROOTFS_PREPROCESS_COMMAND
* ROOTFS_POSTPROCESS_COMMAND
* SDK_POSTPROCESS_COMMAND
* POPULATE_SDK_POST_TARGET_COMMAND
* POPULATE_SDK_POST_HOST_COMMAND,
* IMAGE_POSTPROCESS_COMMAND
* IMAGE_PREPROCESS_COMMAND
* ROOTFS_POSTUNINSTALL_COMMAND
* ROOTFS_POSTINSTALL_COMMAND
Each of these variables no longer accepts arbitrary shell commands but
rather functions. The wordings now support that behavior.
Also, updated the migration section for going to 1.6 release to note
this change.
(From yocto-docs rev: e1ab48f7def9d1eb080e007b88f75172470b8007)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied a little more information to this section to help
round out the variable explanations. Part of the change involved
adding PARALLEL_MAKEINST to the list of scaled variables.
I had left that variable off. Also added a new trade-off.
(From yocto-docs rev: 3d85d5385c03841c17dd33afb94c110edc12170f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some more detail to these two variables. The system sets
them according to the perceived number of cores. These default
setting are cool for single socket systems. However, if you
have some big system with a lot of physical CPUs, you might want
to cap off the values at 20. This is according to Darren Hart.
I also put in some cross-references to the "Speeding Up the Build"
section.
(From yocto-docs rev: 20eafc8290f46d8deea84dd6ff721b65cb8a1463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7665]
Added descriptions in the glossary for the following variables:
* SDK_HOST_MANIFEST
* SDK_TARGET_MANIFEST
* SDK_VERSION
* TOOLCHAIN_OUTPUTNAME
(From yocto-docs rev: d8a7e3443d33d02d88e9d603dcff917a5508ae17)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, added a cross-reference link from the archiver.bbclass section
to the new description.
(From yocto-docs rev: f825ba932970e9d62d335f249365a34b2992b6cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use usermod here not useradd.
(From yocto-docs rev: 7f4a5523c14304985ab8b277fd5010fd22903dea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the requirement that debug-tweaks is needed in order to
individually use the allow-empty-passowrk, empty-root-password,
and post-install-logging features. These three features can be
individually turned on an off regardless of debug-tweaks.
(From yocto-docs rev: ea33b98c0a7ceb80adb15bf63eee8d6872099235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In response to community input where developers were attempting to
locate information on how to write packages out to a directory
other than ${DEPLOY_DIR}/<package_type>, I updated the "Package
Feeds" section, added several new DEPLOY_DIR_* variables, updated
four classes, and updated four tasks. Here are some details:
* Made changes to the "Package Feeds" section to provide more
accurate information in the package feeds directory structure
used by the build system in build/tmp. These changes included
updating the figure itself and some explanatory text.
* Updated the DEPLOY_DIR variable description.
* Added new variable descriptions for DEPLOY_DIR_DEB, DEPLOY_DIR_IPK,
DEPLOY_DIR_RPM, and DEPLOY_DIR_TAR.
* Updated the related classes: package_deb, package_ipk, package_rpm,
and package_tar.
* Updated the related tasks: do_package_write_deb, do_package_write_ipk,
do_package_write_rpm, and do_package_write_tar.
Reported-by: Trieu Nguyen <trieu.t.nguyen@intel.com>
(From yocto-docs rev: e8742267506bf9359346cfcd3965f762ed2c7d6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7630]
I applied some feedback from Laszlo Papp suggesting that the user
can also use '-fpic' as well as '-fPIC' for a command-line option.
(From yocto-docs rev: ec79c9a39955b22cb2b8cec44ffcaab22aba479b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently the "‐" ENTITY used throughout the YP manual set to
get literal "-" characters in example commands renders into a unicode
that is not a dash. This results in users getting errors if they
attempt to cut-and-paste a sample command that uses a "-" character
from the manual into a shell. I have universally replaced all the
"‐" strings in the YP manual set to "-" strings.
(From yocto-docs rev: ef6dbf591eee70866f163e3c98454b6145f4fa3a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I typically try to use the underscore character to string together
multi-word user-input descriptors in examples. I fixed a bunche
here.
(From yocto-docs rev: 68474b5a8b5c96b0fc19fda29e667369f4606e31)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the introduction, the ref-manual references several other YP
manuals. If the manual is build separately, these references resolve
to the appropriate manuals. When the mega-manual is built, the
same references are designed to not become links. In otherwords,
mega-manual.sed processes those links out. This is by design.
I found a #profile-manual tag on one of the links in the introduction.
This resulted in a link in the mega-manual that would go nowhere. I
removed the tag.
(From yocto-docs rev: fdaf114ece20994ec55061612ab53e9334afde26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an attempt to keep the project as much open source as possible,
I removed the link to Intel from this list of resources. We don't
list Linux, OpenedHand, Wind River, etc.
(From yocto-docs rev: 5efe375a94a14d4a70aa2c3ff9ab39d6c7362526)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An old note still existed in this entry that stated we don't support
glibc. This is not true. I deleted the note.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e72f248f45678fb445e60106dd338c4d9cd114d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7630]
Apparently the text relocation being done here can cause runtime
performance issues. I documented a potential work-around for the
issue and provided a cross-reference link to an external site for
more general information about text relocation at runtime.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: f7ba2fd03ee40c5dbe6a07a24a63d9147857ed78)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Style sheet was not spacing after the first paragraph for glossary
entries.
(From yocto-docs rev: fb08aec5303ed21315839c55b413873569497f23)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This involves the following:
* Inserting a new row for all manual revision history tables
to have "October 2015" and 1.9 as the release information.
* Updating the mega-manual.sed file to process links for 1.9
* Updating variables in poky.ent to deal with the 1.9 release
variables.
(From yocto-docs rev: 1ed55c08b96cf0fded38833635111a5c6da86781)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7559]
Added some explanation on the syntax. As it was, the positionally
dependent nature of the script's parameters was not accounted
for. This is now explained. Also, talked a bit about the
bitbake-cookerdaemon.log file.
(From yocto-docs rev: fcf52a15acea2d75df9c84550d7e73c988ffb4bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A cut-and-paste error had left a "package_deb" string in the
first sentence of the section. Replaced with "package_rpm."
Reported-by: Geoffroy VanCutsem <geoffroy.vancutsem@intel.com>
(From yocto-docs rev: 38b20d775ba41cb14d86177dddd85ada32fb3f86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7559]
Removed the information stating that the port address 12345 is used.
Really what happens is a random port address is used.
(From yocto-docs rev: f469c2431b26593a762e348e9c5d0e84c582eab8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated this according to some changes Richard and Paul wanted to
see make it into the 1.8 release.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f571e35169818355fea2a20715df3e8f7405134f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added xlstproc to Fedora and CentOS package lists for building out
the docs.
I abbreviated the list of references in the end chapter by leaving
just the main URLs for bigger areas such as Intel, OE, etc. Then
I put in a link that goes back to the dev-manual list of other
informations as that is much more comprehensive.
(From yocto-docs rev: 81667b85cd8c639dd32cd5a8f614b4c890eb4dde)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed an out-dated note near the bottom regarding a distro
we don't support
(From yocto-docs rev: 4211914f16d4ab01182633785068b56a258c0d04)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We did not have time to do this for 1.8. So, I restored the look
of the glossary pre-images. I did leave commented code in both
the glossary chapter and the style sheet for later.
(From yocto-docs rev: 9f1472b7d4cd86545e7927b0f693aafc88ae2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some suggestions from Paul Eggleton to downplay the role
of this variable. It is basically ignored now in all parts of the
manual set except for the descriptions of the variable itself
and the BBLAYERS variable. I added some text reinforcing the fact
that BBLAYERS_NON_REMOVABLE is ignored by the build system and only
matters if you are using Hob.
(From yocto-docs rev: 98112751aaec6e25de48d9e3ee56592be3f53a07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The docs are not building on CentOS and we think it is due to the
XSL templates being called for the Eclipse parts. I located all
the "current" templates and switched them out for "1.76.1" version
as are used by the mainstream doc builds.
(From yocto-docs rev: afbddde6524630433dfec973bbe886de32395bc8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example was ancient so I consulted Bruce Ashfield for a better
example and implemented it.
(From yocto-docs rev: e737f380ca5bb36c0095f11182cd3e3a93791e61)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7386]
Apparently, copying HTML displayed commands that have a
double dash created through "‐‐" in the docbook source
causes some issues in the shell. I have scrubbed the manual set
to replace any "‐‐" strings with "--".
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: e88b813b71d7d6d8acd8a8638f2db71265145b64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tweak a number of doc lines so that the KERNEL_FEATURES variable
refers directory to .scc files, and does not take advantage of
potentially confusing shortcuts.
(From yocto-docs rev: 6236fb098fc2d518f6f4f63e16b19a06a775d2d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fill out missing machines for the MACHINE variable.
(From yocto-docs rev: 2b8179cfb7e3a25d95c43f9160d284ebd5deefc7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
André Draszik
Paul Eggleton
Robert P. J. Day