Fixes [YOCTO #9554]
I applied some review comments for the section on using GDB
on the target for debugging. Included a new note on optimizations
considerations.
(From yocto-docs rev: 23f0dd82f682ea39849de0f589ee1ebfb16be749)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small grammatical changes.
(From yocto-docs rev: efa1e9c3948f7dd240372a1a1c773286072fbccd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9166]
In the dev-manual, I added a new section titled "Using a
Development Python Shell." This section is similar to the
section that talks about using devshell. The section is
tied to a reference section on the do_devpyshell task.
In the ref-manual, I entered a new task reference for the
do_devpyshell task. It is brief and references into the
new section in the dev-manual.
(From yocto-docs rev: 637128809e298c3d5e660f6da2366f8e9e307218)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9554]
I added a new section titled "Debugging with the GNU Project
Debugger (GDB) on the Target" that provides requirements for
this type of debugging.
(From yocto-docs rev: 5d15c6c5f2030395f9faea8a5ef3ead1b98042d8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Altered the wording to more accurately reflect the issue.
(From yocto-docs rev: 66cda9997a6c17752903a0b5600fb8cae98566e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8631]
These fixes cover the following:
* New glossary entry for SYSROOT_DIRS
* New glossary entry for SYSROOT_DIRS_NATIVE
* New glossary entry for SYSROOT_DIRS_BLACKLIST
* New section titled "Sharing Files Between Recipes" in the
dev-manual's "Writing a New Recipe" section.
(From yocto-docs rev: e541a3c8967f51b903d9dd7978009f4fa7c2f014)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9679]
I added a new section titled "Dependencies" inside the section
that talks about writing a new recipe. This section details
both build-time and runtime dependency behavior and conditions.
(From yocto-docs rev: 37305ea09473dcaee2db4f9cc37c7ce0fc33c52a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10298]
Added a better front part description to the variable.
(From yocto-docs rev: ce8a093235aa78761fde66f345f993ab7cfac6c6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied various edits to the "Writing a New Recipe" section.
Several nits.
(From yocto-docs rev: 17818ff89805e0df3a0445f64a4f9133550fa7d0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied several nits across the manuals based on reviewer
comments. All these corrections relate to the task of shuffling
topics around that have to do with the extensible SDK and the
devtool.
(From yocto-docs rev: 9f8079adc7fa2897fd885aff8e64f9721212e9c7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10297]
Updated the "Other Tips" section to include a couple new tips.
* Remove the /tmp directory as a way to work-around temporary
build issues.
* Create a little method to help you search the massive
amounts of bits for whatever. Also, suggested filing bugs
against the docs if a feature is too hard to find or figure out.
(From yocto-docs rev: d9829dd096f7cc56f8e55fba3190be2a59b80fe5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10295]
Added a third item to the list of mechanisms in the
"Automatically Added Runtime Dependencies" section. The new
mechanism is depchains.
(From yocto-docs rev: 304fe159bfbd426b8b42e1245db83ee57b9e5588)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10294]
Provided text noting that if packages in the PACKAGES list are
empty are not generated, unless generation is forced through
the ALLOW_EMPTY variable.
(From yocto-docs rev: 1c89e0edf7e038f733b9b95bb884648d953b9574)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10292]
I added an additional paragraph at the end of the section that
provided more detail on what the bitbake -e and bitbake -e recipe
commands provide in the way output.
(From yocto-docs rev: 1dcdb6781105f046328271e2b4ba7d875b222dcf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed the note box formatting for the cross-reference
from the sdk-manual and dev-manual sections that
talk about devtool. The reference is now non-note
form and goes to the ref-manual devtool quick ref.
* Added devtool upgrade as a third item in the list that
introduces methods to use devtool.
* Fixed the working on the devtool finish step 5 for both
the dev-manual and sdk-manual.
* Renamed the new chapter that describes different projects
you can use devtool on. The focus is on using the SDK
toolchain directly.
* Scrubbed the entire sdk-manual for the term "toolchain
installer" and replaced with "SDK installer".
(From yocto-docs rev: 6d4daef49cc6d54a700a8c3965c9e8814f75d20a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put in some introductory material for the new devtool
quick reference chapter.
(From yocto-docs rev: dc46f47692a533ac2450bf459c098435c57e6c07)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several improvements to this section.
* fixed a typo where a YP release was referred to as 7.1
instead of 1.7
* Added a note box to the "Using Variables" list item
elaborating on the expansion behavior.
* Removed the detail around the WORKDIR discussion.
* In the "Loccate or Automatically Create a Base Recipe",
I added the devtool add method to the list of ways to
create a base recipe.
(From yocto-docs rev: 79c86fc3653c747ae42f08528063a8984cdd3b4d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extracted the sections on Makefile, Autotools, and Eclipse into
their own new chapter. Seemed to make sense as they are projet
types for both standard and extensible SDK types. Also, swapped
the order of appearance from standard first to extensible first.
This swapping caused a bit of rewriting.
(From yocto-docs rev: 138a4d5576123da800a8fd8d99462a138ceeb743)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed a new figure and a new section.
(From yocto-docs rev: d413ca7b9b946450af7c2c15ab0e68e9181517e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure to use the new devtool finish command. Also
updated the text to provide an approprite description.
(From yocto-docs rev: b26ee800e457a84fe45ecf031cb94f65c38d05f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New maintainers for python(3) modules: Edwin for python3 and Jose for
python2
(From meta-yocto rev: b0e7ac3b54d36977ac46abe5b17ddce54d44a2c7)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In order to load balance Alejandro H. there are new maintainers for the following
packages: aspell, bc, cronie, libusb(-compact), nfs-utils, pcmanfm, ruby, swig,
texinfo, tex-info-dummy-native, ttf-bitstream-vera, unzip and which.
(From meta-yocto rev: 63236ba175569c90a6bb9ec3024e18cdd3437e3d)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Anibal agreed to maintain most perl related recipes (include perl and
perl-native).
(From meta-yocto rev: 20e37fd391a2e9c6f529d4f16d83ed9a4ac12c73)
Signed-off-by: Leonardo Sandoval <leonardo.sandoval.gonzalez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When trying to obtain the current directory from a directory
that does not exist anymore, an exception is raised.
This patch handles such exception.
[YOCTO #10331]
(Bitbake rev: 4bcf77589312d9936340d8c308006c2fc9baf67c)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we weren't testing the deb backaned for sstate correctness
and there was a bug that had crept in. Ensure we cover all package
backends with the test regardless of what the distro/conf sets.
(From OE-Core rev: cdaafc3729700778d95afc2413553d7b41c1317b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, the sstate checksums vary for dpkg-native depending
on which MACHINE is set and this is clearly incorrect. It leads
to dpkg-native rebuilding far too often.
(From OE-Core rev: bbce0f0fed2e2e1a79ae28540915696c6383cd53)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function never worked because the SDK_OUTPUT and SDKPATH vars are
written bash-style in a python function. The only reason it never failed
a build is because the function bails out the start because of the flag
CHECK_SDK_SYSROOTS.
And I guess nobody tested with CHECK_SDK_SYSROOTS enabled until now.
(From OE-Core rev: 9f60dfdaaa74b90ebcfcdd9f3817c62a56243e92)
Signed-off-by: Ioan-Adrian Ratiu <adrian.ratiu@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
galculator configure seems to be so old it does not
recognise --with-libtool-sysroot: regenerate configure.
Fixes [YOCTO #10191].
(From OE-Core rev: 3e838773462e77cb2e3ba9a69534260f89ca4904)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This function was broken by the multi-config changes, and isn't needed anymore
now that recipeutils.pn_to_recipe can handle provides. Without this, the
newappend sub-command fails.
(From OE-Core rev: 4a5028dc3d1ab2f97465e63db5b05de73daebdfa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This dependency was manually added in 3dec9ad1cd6a ("perl: module
overload rdpends on overloading") but was (mistakenly?) removed by
06d43a90acbe ("perl: 5.20.0 -> 5.22.0"). Restore it.
(From OE-Core rev: ff03fccde0177307195a3c918fb914b8ddb6315f)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is obviously meant to be RDEPENDS.
(From OE-Core rev: 7080a5919154ed9dd24872e82352d6d619db8656)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the upgrade to 2.8, lttng-tools' test harness silently succeeds
but doesn't actually run the tests. This is because upstream made
some changes in their test harness:
83666813ca
Updates to address this include:
- drop now-irrelevant patch
- change the ptest-run make target
- remove indiscriminate search/replace commands from do_install_ptest
- copy entire build directory into PTEST_PATH and then remove unneeded files
- use lttng binaries installed on the system for the tests
- add lttng-tools-ptest runtime dependencies
- lttng-tools itself
- babeltrace, used by the test harness to process traces
- perl modules required by babelstats.pl test script
- procps (for pgrep, pidof)
- gawk
- remove unnecessary chmod and munging of utils.sh script library
- remove checkpatch from ptest installation tree
- avoid path-munging of libtool artifacts altogether
- use more efficient find+sed patterns to munge Makefiles
- reduce test harness output to conform to ptest rules
On qemux86-64 and qemuarm I get relatively stable results, with
PASS/FAIL varying by +-1 on successive runs.
TOTAL: 2345
PASS: 1735
SKIP: 311
XFAIL: 0
FAIL: 292
XPASS: 0
ERROR: 7
There are some ERRORs worth looking into further but this should be a
useful basis for future work.
(From OE-Core rev: 9e9875fc19df6b924aa7f9d06e7b4e07222d0799)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Deals with a CVE issue
Drops a patch applied upstream and no longer needed.
(From OE-Core rev: ee590ac736ca2a378605fa1272a1c57a1dbc7a57)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed parted-native dependency from do_image_wic as it's
already mentioned in IMAGE_DEPENDS_wic variable.
Thanks to Christopher Larson for pointing out to this.
(From OE-Core rev: 82353471ccaae59967df7f14de0b4065cbc8169a)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This check ensures that when the PREFERRED_PROVIDER for virtual/kernel
changes, the previous instances gets removed correctly so when the new
instance installs files into the shared area there is not an overlap of
old and new.
[YOCTO #10278]
(From OE-Core rev: 6b67018c2c0229a91fbc55c6aafb86781caf2499)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the change of crosssdk to use SDK_SYS, we need to update the script
to match.
(From OE-Core rev: 8ab1f6073f86d05493bb32a8135c9d912d72f5f0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When changing SDKMACHINE, we may encounter an error forcing us to wipe the TMP folder.
Since only SDK_ARCH is captured in the PN of the crosssdk recipes, changes to SDK_OS
result in conflicts. Eventually we hit the error:
ERROR: ...: The recipe <...> is trying to install files into a shared area when those files already exist.
The build has stopped as continuing in this scenario WILL break things
This patchset addresses the problem by SDK_SYS as the recipe name suffix instead
of SDK_ARCH.
[YOCTO #9281]
(From OE-Core rev: d2eccccb70e809d482c493922f23aef4409cfd82)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
By default, libsolv uses the rpm logic for version comparison, which is
not quite the same as debian. Opkg now sets the distribution type for
libsolv to be debian. But for that to work, libsolv needs to be compiled
with MULTI_SEMANTICS=ON.
(From OE-Core rev: 66e2b56aa5166440f565f9722886bab680d5c4d1)
Signed-off-by: Alejandro del Castillo <alejandro.delcastillo@ni.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has always silently failed on hardware without AMD Northbridge,
and a recent kernel patch made it not silent. It would be ideal to only
whitelist the error for genericx86 MACHINEs and disable the CONFIG
option that enables it in intel-* MACHINEs, but in order to disable
this configuration option we would have to enable EXPERT and
DEBUG_KERNEL, which we don't want. Instead just whitelist it on all
x86 MACHINEs.
Fixes [YOCTO #10261].
(From OE-Core rev: 9c432dae1045a087f8eb2de7c9bd3a9cbd46c459)
Signed-off-by: California Sullivan <california.l.sullivan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On some machines, visualizations in gst-player trigger a bug in
xvimagesink. Till we have a proper fix, disable the visualization
rather than downgrading the xvimagesink.
Fixes [YOCTO #10041]
(From OE-Core rev: b79d1bf49b56a97216fb719ac19e4dd9022f15b4)
Signed-off-by: Maxin B. John <maxin.john@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When a recipe uses more than one source which isn't a plain file (for
example, multiple git repos), then do_ar_original created the source
archives using the same filename and thus only archived one source.
The "name" parameter is used as file suffix to create unique names for
each source, leading to archives following this pattern:
deploy/${TARGET_SYS}/${PF}/${PF}[-<name>].tar.gz.
The ${PF} part is a bit redundant, which may or may not be
desirable. The patch is more localized this way (no need to modify
create_tarball()).
For example, meta-oic's iotivity_1.1.1.bb uses:
url_iotivity = "git://github.com/iotivity/iotivity.git"
branch_iotivity = "1.1-rel"
SRC_URI = "${url_iotivity};destsuffix=${S};branch=${branch_iotivity};protocol=http;"
url_tinycbor = "git://github.com/01org/tinycbor.git"
SRC_URI += "${url_tinycbor};name=tinycbor;destsuffix=${S}/extlibs/tinycbor/tinycbor;protocol=http"
url_hippomocks = "git://github.com/dascandy/hippomocks.git"
SRC_URI += "${url_hippomocks};name=hippomocks;destsuffix=${S}/extlibs/hippomocks-master;protocol=http"
SRC_URI += "file://hippomocks_mips_patch"
url_gtest = "http://pkgs.fedoraproject.org/repo/pkgs/gtest/gtest-1.7.0.zip/2d6ec8ccdf5c46b05ba54a9fd1d130d7/gtest-1.7.0.zip"
SRC_URI += "${url_gtest};name=gtest;subdir=${BP}/extlibs/gtest"
url_sqlite = "http://www.sqlite.org/2015/sqlite-amalgamation-3081101.zip"
SRC_URI += "${url_sqlite};name=sqlite3;subdir=${BP}/extlibs/sqlite3;unpack=false"
These now get archived in deploy/sources/*/iotivity-1.1.1-r2/ as:
gtest-1.7.0.zip iotivity-1.1.1-r2-recipe.tar.gz sqlite-amalgamation-3081101.zip
hippomocks_mips_patch iotivity-1.1.1-r2.tar.gz
iotivity-1.1.1-r2-hippomocks.tar.gz iotivity-1.1.1-r2-tinycbor.tar.gz
(From OE-Core rev: 5c63ffc706c0fff8cfb797a238f4f0e73ee2813d)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Support for absolute paths in the "subdir" parameter was recently
added (bitbake rev: c3873346c6fa). The git fetcher has supported
absolute paths in "destsuffix" already before.
When the path is absolute as in destsuffix=${S}/foobar, the tmpdir
used by do_ar_original gets ignored, which breaks:
- source code archiving (tmpdir is empty)
- compilation due to race conditions (for example, ${S} getting
modified by do_ar_original while do_compile runs)
To solve this, these parameters get removed from URLs before
instantiating the fetcher for them.
This is done unconditionally also for relative paths, because these
paths are not useful when archiving the original source (upstream
source does not have them, they only get used by the recipe during
compilation).
(From OE-Core rev: c27c464e267db3f4b08cbd966412d19b0e756d28)
Signed-off-by: Patrick Ohly <patrick.ohly@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Leonardo Sandoval
Juro Bystricky
Richard Purdie
Ioan-Adrian Ratiu
Jussi Kukkonen
Christopher Larson
Nathan Lynch
Bruce Ashfield
Ed Bartosh
Saul Wold
Alejandro del Castillo
California Sullivan
Maxin B. John
Mingli Yu
Patrick Ohly
Daiane Angolini