I added some detail about what really happens when you use the
'make defconfig' command when working with your own sources.
Fixes [YOCTO #6611]
(From yocto-docs rev: 653c7726e024dcaa908127f0df1d1856f26f4ff0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Poky's commit edde3e58da included
the biosfilename option on the runqemu script.
(From yocto-docs rev: 3c834547ace29c14bce6afa0369a727f3afbd650)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new description.
(From yocto-docs rev: e17fe8da8a9d2cbca54dd45451b35103d7d89fa0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was a complete re-write of the YP Quick Start in an attempt
to streamline it, remove unecessary detail, and make it flow better
with the examples. In doing so, many manuals were affected due to
section headings being renamed, information being moved, etc. Here
is a list of the changes by manual:
Makefile - Removed two figures from TARFILE list for the
yocto-project-qs.
Added building-an-image.png to the ref-manual TARFILE list.
Added using-a-pre-build-image.png to the adt-manual TARFILE
list.
Repositioned 'eclipse' in the adt-manual TARFILE list.
adt-manual: Fixed a cross-reference so that it goes to the new
'Building Images' section that is within the YP QS.
Added new section 'Example Using Pre-Build Binaries and
QEMU' to hold the information that was formerly in YP QS.
dev-manual: Removed a cross-reference into the YP QS that promised how
to configure the most efficent build.
Changed a cross-reference into the YP QS from 'The Packages'
to 'The Build System Packages'.
Changed a cross-reference into the YP QS from 'Building an
Image' to 'Building Images'.
Changed a text reference from the YP QS to the adt-manual.
Moved the bit about getting YP files by using the YP website
from the YP QS to the dev-manual.
Changed a cross-reference into the YP QS from 'Using Pre-Built
Binaries and QEMU' to 'Example Using Pre-built Binaries and
QEMU', which was moved to the adt-manual.
ref-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto Project'.
Moved the note about if your system has oss4-dev in the
packages area in the YP QS to the appropriate area in the
ref-manual.
Moved the introduction information regarding building an image
along with the figure from YP QS to the ref-manual's section on
building images.
toaster-manual: Changed a cross-reference into the YP QS from 'What You
Need and How You Get It' to 'Setting Up to Use the Yocto
Project'.
yocto-project-qs: Complete rewrite that changed many section headings and
removed much detail, which was placed in other manuals.
(From yocto-docs rev: da4ed8147b04963a700caa784bda709c57b4eb6e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed wording in section 7.78 to use "nativesdk-myrecipe.bb".
Fixed message to say "non-dev/-dbg/nativesdk- package contains symlink..."
Reported-by: Rene Fichter <rene@fichter.se>
(From yocto-docs rev: 80a5b51a0416dc610edf1526079102fee661375b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Applied some review edits to the wording from Ross Burton.
(From yocto-docs rev: 4cb0d0f463cb6c9b103d01b7c5e800e7b1a04a3e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a clarifying paragraph at the start of the section that talks
about building on the target hardware. Included kernel-devsrc and
rationale for why a user would even do this (it is not normal).
(From yocto-docs rev: 5c42f981e9e54ae286b5ea5faf4dd29486c6350c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7271]
Removed all traces of the daemon requirement.
(From yocto-docs rev: 1c1da060322e7e964f860dc4b80b5411ea19b1b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Once again... having to try and match what is done by the release
team. I think going forward we will use this form for
YOCTO_RELEASE_NOTES
(From yocto-docs rev: 0ea252a4eed6be93ded0b746b7d1267a2893e5ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information to note when it is used (insane.bbclass) and only
if the recipe inherits the autotools.bbclass.
Fixes [YOCTO #7755]
(From yocto-docs rev: eeb3006e0a440464af89e336b9eff0ea60702601)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #6611]
Added a new step to the "Working With Your Own Sources" section
so that the user is aware of needing to provide a defconfig file
or configuration fragments to the SRC_URI variable when working
with the yocto-linux-custom.bb recipe.
(From yocto-docs rev: dd25274979f689ae9135158279080add19a98393)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in about the various varflags the user can
use to define the type of archive.
(From yocto-docs rev: 9035c415d4453750f016fe4ea2fa8179549330ca)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The customization layers were pointing to Sourceforge site for the
XSl files needed to build the manuals. Throuhgout time, this site
has failed me enough to warrent trying to get these XSL files from
some other source. Rather than ship the XSL files with the YP release,
we decided to create some mirrors and point the customization files
there.
(From yocto-docs rev: 4fd1703870694dff1f593b421f90aad0803d9e65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
There was a TBD section here that needed filling out.
(From yocto-docs rev: 84efce1622dec2782aadfb9cc9338c3f7aab1472)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the new section "Using an "In-Tree" defconfig File"
section. This section addresses the ability to not use the
default location for defconfig files, which is usually in the
metadata layer. The section describes how to use the
KBUILD_DEFCONFIG variable.
Fixes [YOCTO #7474]
(From yocto-docs rev: d68f7b47d974d94177b344247056778742f57786)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Configuring the Kernel" section did not address "defconfig"
files. In my opinion, this is a hole in the docs for this section.
I added a new section titled "Creating a defconfig File" that is a
sub-section of the "Configuring the Kernel" section.
Additionally, I added a brief sentence in the introductory paragraph
to include the fact that this new information exists.
Finally, I included the bitbake command that ensures that the
proper configuration steps are minimally run before a user attempts
to use bitbake to get into menuconfig.
Fixes [#YOCTO 7474]
(From yocto-docs rev: 13c0c7dddca59474ef65dacc12f0bfaa38933887)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7474]
The "Generating Configuration Files" section has a procedure that
starts with a step to complete a build at least through the
kernel configuration task. This is needed but we could use a
bit of explanation here. I added some rationale behind why you
should do this.
(From yocto-docs rev: 63df3474f4ed211dd6b7d1cf4f4e90bbc92c2595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been deprecated a while and Paul Eggleton suggested
we finally remove it from the glossary. I removed it and also
took away the two links from where the variable was referenced
in a couple spots in the migration section.
(From yocto-docs rev: 2b3c762428bd9ca64087ba6359c4eb5fb5a3db84)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7755]
Added a new description for this variable. Based it on information
given to me by Paul Eggleton.
(From yocto-docs rev: eb0101027ed18b6bae2d80166b73b41ee1ebeb9f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added better wording to show that you use spaces to separate
multiple features.
(From yocto-docs rev: b21d73acb23e0e3b78cff332fdc4a09166eb7392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section needed some more information. It referenced the yocto-kernel
script and menuconfig. I added references to the appropriate areas of
YP documentation for these. I also changed wordings to that it is
apparent that .config is created by menuconfig when changes are saved.
(From yocto-docs rev: bd1a3f6fa0268635f52bc77d9b35b5110b18a9f8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way to include tcf-agent now in an image that you are going to
remotely deploy and debug using the Eclipse IDE is to simply include
the eclipse-debug image feature as part of the image. I updated the
section around getting images to reflect this simple method.
Reported-by: Adam Lee <adam@gumstix.com>
(From yocto-docs rev: 9aec91d7f4fda558baa0e8a0290b42d76e735c63)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed [YOCTO #7632]
Looked for, updated, and added (if necessary) the following
variables:
* ROOTFS_PREPROCESS_COMMAND
* ROOTFS_POSTPROCESS_COMMAND
* SDK_POSTPROCESS_COMMAND
* POPULATE_SDK_POST_TARGET_COMMAND
* POPULATE_SDK_POST_HOST_COMMAND,
* IMAGE_POSTPROCESS_COMMAND
* IMAGE_PREPROCESS_COMMAND
* ROOTFS_POSTUNINSTALL_COMMAND
* ROOTFS_POSTINSTALL_COMMAND
Each of these variables no longer accepts arbitrary shell commands but
rather functions. The wordings now support that behavior.
Also, updated the migration section for going to 1.6 release to note
this change.
(From yocto-docs rev: e1ab48f7def9d1eb080e007b88f75172470b8007)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied a little more information to this section to help
round out the variable explanations. Part of the change involved
adding PARALLEL_MAKEINST to the list of scaled variables.
I had left that variable off. Also added a new trade-off.
(From yocto-docs rev: 3d85d5385c03841c17dd33afb94c110edc12170f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated both the PARALLEL_MAKE and PARALLEL_MAKEINST variables
by expanding the note to indicate how to prohibit parallel make
threads. Also, added a cross-referencing link to the
"Debugging Parallel Make Races" section.
I added a short note to the start of the "Debugging Parallel Make
Races" section noting that if they can't properly fix the condition,
they can always do a work-around to set the PARALLEL_MAKE or
PARALLEL_MAKEINST variables to null.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f8dccf3f115647cb039d91415819186cf38fa8bb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some more detail to these two variables. The system sets
them according to the perceived number of cores. These default
setting are cool for single socket systems. However, if you
have some big system with a lot of physical CPUs, you might want
to cap off the values at 20. This is according to Darren Hart.
I also put in some cross-references to the "Speeding Up the Build"
section.
(From yocto-docs rev: 20eafc8290f46d8deea84dd6ff721b65cb8a1463)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7665]
Added descriptions in the glossary for the following variables:
* SDK_HOST_MANIFEST
* SDK_TARGET_MANIFEST
* SDK_VERSION
* TOOLCHAIN_OUTPUTNAME
(From yocto-docs rev: d8a7e3443d33d02d88e9d603dcff917a5508ae17)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the "Optionally Building a Toolchain Installer" section
to emphasize using 'bitbake <image> -c populate_sdk' as the method
for building outa toolchain. Before the change, equal emphasis was
put on for this preferred method and the 'bitbake meta-toolchain'
method.
(From yocto-docs rev: 447ad6167570bf1bd227771153de421d1154443d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7524]
The "Writing New Tests" section needed more clarification in the first
paragraph. One requirement is that minimally, an empty __iniit_.py
file must exist in the runtime directory.
(From yocto-docs rev: 519d0ff95e2ffbdb615d6dc27a6c11b393eb4b53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also, added a cross-reference link from the archiver.bbclass section
to the new description.
(From yocto-docs rev: f825ba932970e9d62d335f249365a34b2992b6cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We need to use usermod here not useradd.
(From yocto-docs rev: 7f4a5523c14304985ab8b277fd5010fd22903dea)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are the gummiboot tests recently removed from OE-Core, with the
following changes:
* Make them use MACHINE = "genericx86-64" instead of "nuc" and remove
all usage of meta-intel
* Use DEPLOY_DIR instead of assuming build directory will be in the
default path relative to COREBASE
* Fix build test to actually check if the file was created as part of
the test instead of possibly being around from a previous build
* Fix wic test to actually check the output to find the name of the
.direct file that wic has created, instead of passing if any .direct
file happens to exist in /var/tmp/wic
(We can now add these in this layer courtesy of Chris Larson's OE-Core
commit 182b8ed9f26ed8b6a8eb6dcaec82db9aca14b010).
(From meta-yocto rev: 8e945e39327869c6b53959c5eb324ba3e4cb0b20)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since shell scripts run with 'set -e' the final exit at the end of the
script can only be returning 0. However, for correctness and to follow
the original intention of the 'cleanup' commands, let's fix the typo
and return the success of the last shell function rather than the
success of unhooking the exit trap handler.
(Bitbake rev: bef724057f1ea81571dd3ac5a9cf862f818434b5)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fix error '[[: not found' if /bin/sh is not bash.
This issue was introduced by the recent addition of tar_ignore_error.patch
to the opkg-utils recipe.
(From OE-Core rev: 2cf2242fc30b3d1ceb538ff5106e000cd888652e)
Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change
ensures that if another libc is used, symlinks are present such that the
compiler can be found. The base version is always assumed to be "glibc"
with symlinks from musl and uclibc compiler names.
This means gcc-cross-canadian is consistent regardless of which libc is
selected when its build in multimachine builds.
[YOCTO #8025]
(From OE-Core rev: 83ead626c0da75edec2833ffb1a29011ec7b83d2)
(From OE-Core rev: ee16cb0a3f40384f509083f0ef3f36b68f73b7cf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross-canadian-<arch> is only built once. It needs to target all the
different libcs, not just the currently selected one. This change ensures
that if another libc is used, the compiler correctly selects the right one.
[YOCTO #8025]
(From OE-Core rev: da2e92e256054b137a1646fdad1fe1a47ba3215a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If start() returns False due to create_socker() failing, stop() may still get
called and currently this gives a track back since server_socket doesn't exist.
Avoid this.
(From OE-Core rev: 26fb69ec663afd05134822dc5e48fc8928ea5bf1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently nativesdk-qt4-tools can't be built if the DISTRO_FEATURES doesn't contain x11.
To make it build we add a dependency to x11 only if the feature is activated.
(From OE-Core rev: 7216116c9552e812d8c75c0687223f9a84204a28)
Signed-off-by: Pascal Bach <pascal.bach@siemens.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With gcc 5, we need to disable the PIE flags for more recipes in order
to have successful builds.
(From OE-Core rev: ec2f1b5af102ab6a8fcc23bf115c8f0451ab7eb8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For debugging purposes, 5 lines often isn't useful as it doesn't even
cover a full backtrace. Show 25 instead.
(From OE-Core rev: 5b3ff562b2c56df301fc402c8b84420d8d4e5705)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Leonardo Sandoval
André Draszik
Paul Eggleton
Andre McCurdy
Cristian Iorga
Dominic Sacré
Richard Purdie
Pascal Bach