Fixes [YOCTO #4927]
Provided a note and some explanation about YP support on the
official distributions.
(From yocto-docs rev: c2957ad400127d05f940dc326cb5da4994a66785)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4911]
This bug's comments determined that the link from the
"Supported Distributions" section to the wiki page that shows
a list of tested distros be removed. The wiki page has been
updated to link into the section of manual and the wiki page
states that it is out of date. So, the manual should not point
back to that wiki page.
(From yocto-docs rev: 8d22568b348c1ba34068f73711e70b5eb507f29e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording to better reflect what these sample images
in the chapter really accomplish.
(From yocto-docs rev: 8ae60cd52e5b8fba02b00bdd8b7b242a077e8196)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
New section for package feeds created. Includes a new figure
also.
(From yocto-docs rev: 6d8b41114ebadcfb06f6064a13c4da5b47a9f73c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4935]
Two typos located and fixed.
Reported-by: Laszlo Papp <lpapp@kde.org>
(From yocto-docs rev: 805ff913b85bff390609beabdbbf48e45589ee13)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4907]
Open Graphics Library was not included in the list of supported
distro features that could be included using the
DISTRO_FEATURES variable. It is now.
(From yocto-docs rev: 2e06fe0f8135c13d3a86857f9b0e450239cedbf4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4753]
Minor review edits to this buildtools section. Additionally, I
removed the "-y" argument from the CentOS package install
commands.
(From yocto-docs rev: 8f5991f7d3a5ceee63a022af19afd713dcf740c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
I updated the "Sources" section with review comments from
Paul. The figure needed changed as well as some text changes.
(From yocto-docs rev: 0a44dbdebce50fb599b8dcb2f17adc76f9fb862c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
The "Sources" section provides a more detailed look at where
BitBake gets source files from. This change included the
first draft of the text and the first draft of the expanded
figure.
(From yocto-docs rev: 4e432a05666e67c6494486f392a05f629c6c148a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Some small changes to the layer figure and the software
layer wording.
(From yocto-docs rev: 687652a4970910de8a4636999f63ad5c7e861069)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
Applied review comments from Paul Eggleton on the user configuration
and the layers section. Changes applied to the figure for the
user configuration section as well.
(From yocto-docs rev: b05af4b740f0daf3d6c59acf71c362decba2a176)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
I applied extensive review comments to the user configuration
and to the layer sections. These revisions also included
updates to the two figures.
(From yocto-docs rev: 029692b07cb7dff605b81aa45de7c891a3a77db1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2808]
This figure is slightly different than our reference environment
figure used in the QS. I did not want to simply duplicate it.
Here the only difference is boxing in the metadata layer input
to the left.
(From yocto-docs rev: d1c8c69dfb5ec4261b8e5d15de6d5088fde86024)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a pass through this before sending it out for review.
(From yocto-docs rev: 702f65bb497b157dfd2635f9b13ffd679dda9d0a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Start of the new section on the closer look into the development
environment.
(From yocto-docs rev: e1f1cee951433144d1adedcb4f0bbc8d8296c444)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4753]
I added the URL for where this tarball will be located once we
release YP 1.5. Until we release, the URL will not resolve.
(From yocto-docs rev: 694571690e91ecc49e9afa85b9084543b71a85c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #4753
This is the main change to address this bug. It is a new section
that describes how the user can get a buildtools tarball if their
system does not meet the proper Git, tar, and Python versioning.
(From yocto-docs rev: 0493a55c85f050ba29f605ab727e557849242bae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that a glossary entry for SDKMACHINE exists, I needed to
create some links to it where referenced in the ref-manual
and the adt-manual.
(From yocto-docs rev: 6efe13bcda22276e5ef71ebafff6f91961b34679)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #4519
I have added a note after the list of supported Linux distros
that states there might be problems on a given distro when
using YP. I cited the CentOS 6.4 example for this 4519
bug.
(From yocto-docs rev: 30c413739aae99462ec2b4771041d4c115917aa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of this new section. It included a figure so the
figure had to be added to the "figures" folder of the
mega-manual.
New section introduces concepts behind the types of cross-toolchains
YP develops through user commands that build images and build the
relocatable SDK.
(From yocto-docs rev: b3c9a2e3f90892a2175110393a962fd152316ca6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3882
This is the review draft for the wayland section.
(From yocto-docs rev: 54234dae5c2957ef2c1a6cb03a7e7fe0fa2cea34)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-wrote some stuff to be clearer.
(From yocto-docs rev: 7c8f529d099d1a234be5e5652acdbb63c9d44d42)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated some of the explanation to be more specific about
the default paths the build system uses and just exactly how
a user should use FILESEXTRAPATHS.
(From yocto-docs rev: 5eba1437fb07300d0b42011eb82200215201c8ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The URL naming convention for the YP Release Notes has changed.
It now takes the following form:
http://www.yoctoproject.org/download/yoctoproject-15-poky-1000
The above is an example for YP Release 1.5 and poky release 10.0.0.
I have set up three new variables in the poky.ent file to somewhat
automate the links in the docs to point to the location of a given
set of release notes:
1. DISTRO_COMPRESSED - set to the DISTRO string with no period
(e.g 15 for 1.5).
2. POKYVERSION_COMPRESSED - set to the poky version with no
periods (e.g. 1000 for 10.0.0).
3. YOCTO_RELEASE_NOTES - set to the full-blown release note
URL.
I made two changes to existing links for the Release Notes. One
was in the dev-manual and one was in the ref-manual.
(From yocto-docs rev: e6088927980a1de8022b22f7f38b3046fea20235)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I created a partial draft of the new section that describes
how to use the wayland feature.
(From yocto-docs rev: a03d1897a39ee2eb0fbb551c66c63b10928aebc4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added a new glossary entry for the THISDIR variable.
2. Inserted a link in the note of the FILESEXTRAPATHS variable
to the new THISDIR glossary entry.
(From yocto-docs rev: a4e704ff165959fab9c1e6f7d28906e8f15c6d27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit more clarification (different wording) on why to
use the immediate expansion operator and on why to include
the trailing separating colon character.
(From yocto-docs rev: d5789c98fe570f48de8546d1fc218b4d5c577d0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These two packages are required for all the supported distros
if you are going to build the BitBake manual.
(From yocto-docs rev: 76b19462aa1dd850c00b7addccdafcc0f1a67e1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some discussion about this variable indicated that the importance
of the immediate expansion operator was not being called out
enough. I added further information to the existing note that
states to be sure to use ":=" when using the variable.
(From yocto-docs rev: b97d3fa714a7c71356cd00548d3d01280034afc2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In line with our policy of supporting the current and previous
releases of host distributions (and additionally the latest LTS release
of Ubuntu):
* Add Ubuntu 13.04 (released on 25th April)
* Remove Fedora 16
* Remove 5.x versions of CentOS
* Remove OpenSUSE 11.4 and 12.1
* Remove pre-1.3 versions of Poky
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 9ae656fb351a7df735f87f99d9823a53774ffb0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Changed the variables in poky.ent to contain the "1.5"
string and the "tbd" string for the unknowns.
2. Updated the manual revision history tables so to replace
the 1.4.1 release entry, which should not be there, to the
1.5 entry.
(From yocto-docs rev: d03a09875b1fe0d244b7a7c1bde718319d95a8ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Edited poky.ent to have 1.4.1 and 9.0.1 for release stuff.
2. Updated the manual revision tables to have a new entry
for 1.4.1 release.
(From yocto-docs rev: bd4058b98f93ea5fd5d878f24018ce78b8ce1a53)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some re-wordings as suggested by Bill Traynor.
Reported-by: William M.A. Traynor <wmat@alphatroop.com>
(From yocto-docs rev: 2510d9795720afc0309a10b18605e5af4a83769b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert read through the BSP Guide and noted several issues.
There were several typos, inacurracies for crown bay code,
out-dated kernel usage example, etc.
One change I had to make that was related was to fix two cross-reference
links to a re-named section. These links were the changes in the
FAQ chapter of the ref-manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ae45df660ebf33105ebf5e60e606b0ec76eb9a6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Release 1.4 requires the user to create an append file to the
new recipe init-ifupdown if they want to create their own
custom /etc/network/interfaces file. Previously, they needed
to append the netbase recipe.
Changes needed in the migration section of the ref-manual as
well as the exmaple used in the bsp-guide.
(From yocto-docs rev: 1903df0c21dbc018f0dbb4ce90eac192b428606b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review comments from Paul. Took the warning formatting
out because it sucks.
(From yocto-docs rev: 6c4162777cb686c8b24b15ded2594f4f4a6acba6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more clarity about how this variable works and the
implications for using the default setting from the base.bbclass
file. Namely, if you are going to have the build system look
for files in your layer and your layer uses an append file,
then you need to also use the FILESEXTRAPATHS variable to
extend FILESPATHS.
(From yocto-docs rev: 2826fa6f9286efb1d5ca6cf85f65266a35bb8cfc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found it confusing due to not specifically accounting for
.bb and .bbappend files. I added some wording to clearly
specify use given the two types of "recipes". Specifically,
if you are going to use a SRC_URI statment from an append
file, the user really should be aware that they will need
to extend the FILESPATH variable by also using FILESEXTRAPATHS
from within that append file.
(From yocto-docs rev: 8fd0047bd5c4598532afc6f0803f6ae23fa213b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "Yocto Project" distros and renamed the
openSUSE-project to openSUSE.
(From yocto-docs rev: 8e29abce57d5bfca04633b1b0c5a57809513056f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul gave this a review and we found some issues.
Slight changes.
(From yocto-docs rev: 1e64fe277a6daaf484e56c3e9117fd72bb107614)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some formatting to fix up Kevin's patch. One thing important was
that the <ulink> line cannot span multiple lines. I fixed this.
When they span multiple lines, the sed script used to convert the
links for the mega-manual breaks.
(From yocto-docs rev: e31012878c709eccae94734f7933559cb1187c47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Patch from Kevin that adds a new class. Note that the
patch removed the existing src_distribute_local.bbclass
class.
(From yocto-docs rev: 4ce602093bc9ddfcbcd9392bcc8fd6187885bdf1)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a cross-reference to the "How to Submit a Change"
section. I added a bit of text to note that the ready can
go there to find out who maintains code.
(From yocto-docs rev: 30a2602c4c0945f1c9bd2a7fa71c1b98e790b2eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton provided quite a series of patches that I previously
applied. These changes represent the edits from an interactive
review he conducted with me. The series of changes represents
his review for the entire set of changes in the original patch
series.
(From yocto-docs rev: e26f615a01de2b101e97eb6fd7175b813f74295e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed some spelling checks against the files associated
with a large number of patches sent by Paul Eggleton.
(From yocto-docs rev: 8b16924aa1da161271cbfce5410344d94c840fa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New section for the Migration chapter.
Reported-by: Paul Eggleton <paul.eggleton@linux.com>
(From yocto-docs rev: 34745eec0f30d1ee5e02c1e681d7506a85d78aa9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Link put in the "Migration" section.
(From yocto-docs rev: 43c8fd145737bb504cae6cf24a1553af7ad121b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New variables DISTROOVERRIDES and MACHINEOVERRIDES resulted in
needing a couple links from the "Mirgration" chapter.
(From yocto-docs rev: cd1b7f7c430eddd5953dc1dac1defe968cfde0aa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
STAMPS_DIR was split out of STAMP recently.
Added some specifics about who is doing what.
(From yocto-docs rev: dafb13f4b3c4cf40292d43ea53fe9150d4dfc0ee)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some specifics and a bit of a rewrite.
(From yocto-docs rev: 03435b52f9f27729d81d46ec6d87cf73b4bd92cb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took out the clause in the parantheses set and replaced
with better structure.
* Ensure we mention what kind of files go into T
* We're talking about recipes here, not packages
(From yocto-docs rev: 8783bb7beb10e0fdfca22648f1dff4a85b760cd7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed some ambiguous text.
(From yocto-docs rev: cdf5cf7505af9c2c61e7b7d8a7db61ec0baad254)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Broke the long first sentence up.
(From yocto-docs rev: bfccfc6401c3e1dd88e7a965f1df1a68801844fa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tightened up the writing for both entries.
(From yocto-docs rev: b6a0679fb74aef4a718e42d20343f5b7ae8e9679)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some more specifics for who is doing what.
(From yocto-docs rev: 3156a8f3af24cfd21478f2cf29ca9fdac699c0dd)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rewrote the description to break it up a bit and flow better.
(From yocto-docs rev: 7f0e8cf693b3b0a77537a15f7962f9e0e05fddfa)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recast the sentence to read better.
(From yocto-docs rev: 522f7b2bb8a8f25e5ce1f4397a581c289beae51f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a consisten introductory sentence before jumping into
how to use the variable.
(From yocto-docs rev: 3e68a345d233ca2fd60e02290547578001b2fa0c)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed a redundant use of "and" and broke the long sentence into
two.
(From yocto-docs rev: d6087ffaf36a3e3f16a7910c2b065bebaaf20a23)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that BB_SIGNATURE_HANDLER is OEBasicHash in OE-Core (which has
already reflected in this section) this statement makes no sense, so
drop it.
Changed "metadata" to "Metadata" for consistency across the
manual.
(From yocto-docs rev: 7bdf37f4930a96402344a9b988aee1012b602a77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable must be set to 1 in order to inhibit stripping, so specify
this.
(From yocto-docs rev: 35c4a025b68857495f252b35bb50288e308dc5c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Tightened up the text.
(From yocto-docs rev: 9b697681e0c2c3658c6552ec0c9951fc987c9b10)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some key words to tighten things up.
(From yocto-docs rev: 8da0f8bd5c54c16e62c0f226d7473e32f3fb5928)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A bit of rewriting to tighten things up.
(From yocto-docs rev: a2b30eb3fc6b6ef276f5b95aff0ddb7e2e26c8c3)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The existing definition was sparse and not quite correct.
I did some rewriting for active voice and present tense.
(From yocto-docs rev: da1eb14573e2050dc03046311d9f2621f5dcc825)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This also necessitated adding HOST_SYS so we can point to it being
matched against by COMPATIBLE_HOST; similarly MACHINEOVERRIDES and
SOC_FAMILY needed to be added for COMPATIBLE_MACHINE (and while we're
at it, let's add DISTROOVERRIDES; however I've drawn the line at
OVERRIDES since that ought to be covered by the BitBake manual).
Quite a bit of rewriting here to clear up some ambiguity created
through article use not specifically associated with subject matter.
Also, some recasting to active voice and present tense.
(From yocto-docs rev: 4090073899e3dfd0e0e6a17aea8210546f08a942)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added quotes around the cross-referenced section title.
Cleaned up some passive voice and future tense.
(From yocto-docs rev: 4ee5834f8262ced5417a63fa76baa6594138e087)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-wrote to be active and in present tense.
(From yocto-docs rev: 7fabb25ab15da501ac3aae64a56d41c9cad6bbe7)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added quotes around the section head for the cross
reference. Made some sentences present tense rather
than future tense. Shortened a sentence.
(From yocto-docs rev: 77f8a2778e5880928cc79e56636a12a39f25492a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a few edits to clean up some sentences. Broke one long
sentence up into two.
(From yocto-docs rev: 7641113906e062b751abb5366827fe302ec4a2b9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added proper text formatting and cross-reference links to the
variables that exist in the reference glossary. Did a bit of
writing to shorten some long sentences and perform general
clean up.
Add the following missing QA checks to the section on insane.bbclass:
* textrel
* pkgvarcheck
* xorg-driver-abi
* libexec
* staticdev
(From yocto-docs rev: 2857cc20b3b136b17d1d2892e046b2ae7f4b699d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Just a couple of examples that didn't use quotes around the value, which
is mandatory, so correct these.
(From yocto-docs rev: 2903ce2b232536c566bd8c29a8772823b44c19df)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the line breaks so new sentences start on a new
line.
(From yocto-docs rev: 6bb50f51edc44222970db42d7441303d042a2262)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I rewrote the class description to conform to the existing
manual style. Mainly making voice active and breaking up
long sentenced.
(From yocto-docs rev: e715167e280eb647be52c142f733942dab3f4dfb)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662.
Per comments from Paul Eggleton, I updated the description to
include best practices of prepending and from using within
append files.
(From yocto-docs rev: 368055bc046277fe601ff3a64913044be0a15e6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Applied changes from Paul to the read-only-rootfs section.
2. Applied changes form Paul to the customizing images by using
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES variables. This
was a simple rewrite of a sentence.
3. Updated the note in both the IMAGE_FEATURES and
EXTRA_IMAGE_FEATURES glossary entries to specify inside
of an image recipe (more specific).
(From yocto-docs rev: 762b9e4d3b45a9602284cf4dd1ac281dcbbed7f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Comments from Paul Eggleton applied. Basically, reinforcing
enabling features from inside and outside of the image. Changed
the wording of the respective notes.
(From yocto-docs rev: 23897c6ebc56dde63803293c0992b2d5c6ff7345)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor adjustments such as creating alphabetized lists,
fixing a typo, eliminating a repeat, separating out the
recipes that were moved into a new section, etc.
(From yocto-docs rev: 34f73b62b4acdc6136b22916811cd9156b6422f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Paul Eggleton sourced this information.
(From yocto-docs rev: 61ab295071718c4fedd258a0545c17cb43c8c093)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* BBFILES should be appended to with +=
* BBPATH should be appended to with .=
* Immediate expansion is not necessary for BBFILE_PRIORITY
* Immediate expansion is not necessary for references in layer.conf
to LAYERDIR since these are automatically expanded at the end of
parsing the file (and have been for some time).
* Add collection name override to BBFILE_PRIORITY example
* Fix comments referring to old structure ("packages directory" or
"recipes directory")
(From yocto-docs rev: 0aaac8f5ad97c802ebe1d4f3ffb7987050533292)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a paragraph to the top of the section on buildhistory mentioning the
metadata-revs file and the top-level directories.
(From yocto-docs rev: ae7c7c64dd31f5b5c57eac9c772972523f49c05a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some rewriting to conform to the manual's style and
formatting.
(From yocto-docs rev: 6a961978b207d8992ade86f82838914b858accdb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Additional information added to the end of the
"Build History Package Information" section."
Buildhistory now collects information on SRCREV values for recipes
fetched from a version control system e.g. Git; additionally a
buildhistory-collect-srcrevs tool is provided to gather this and
convert it to a format suitable for inclusion in global configuration.
Add information on these new features to the appropriate section.
(From yocto-docs rev: 8c38bcbe8e737d7dfb41a763c87a3a6269e6f980)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a bit of cleanup on the text from Paul's patch number 1.
Just some active voice stuff mainly.
(From yocto-docs rev: f08fa3da997e53c587e3f17ef908e41594654db3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New section titled "Build History SDK Information" added.
(From yocto-docs rev: aaa9ee5690a68f72b21ca3ab731942d80acac2f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inserted parallel wording so the description is more similiar
to IMAGE_FEATURES description.
(From yocto-docs rev: 535a9676ac9d2a5778fb6978027f018e83460157)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to show the best way to use this variable in relation
to the EXTRA_IMAGE_FEATURES variable.
(From yocto-docs rev: 3afa91f8fdecae18320364d9332639e725ecef5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information suggesting best use is from the
local.conf file.
(From yocto-docs rev: acfe2a58cab3ffbddaa1631e7df37d36f4f1422a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A couple sets of review comments from Paul applied here.
1. Added the "read-only-rootfs" item to the EXTRA_IMAGE_FEATURES
variable description and a link to the appropriate section
in the dev-manual.
2. Pulled the how-to-create a package repository section out
of the section on how to customize an image with the
IMAGE_FEATURES and EXTRA_IMAGE_FEATURES section and made
it a stand-alone section in the "Tasks" chapter of the
dev-manual.
3. Integrated the SSH server example into the main topic
because we don't want an isolated sub-section within a
main topic.
4. In the image features section of the ref-manual, I fixed
the link with the "read-only-rootfs" feature to go to
the now-isolated section on how to do that instead of
going to the customizing an image using the IMAGE_FEATURES
and EXTRA_IMAGE_FEATURES variables section.
(From yocto-docs rev: 9c79b5f40d8dc6b37fbe636a2459f89b70bd8ea8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes are the review comments from Paul Eggleton regarding
setting up the optional package repository on the host that
can be used by Smart. These changes reflect the fact that
the task is not package-type dependent or host web server
dependent.
(From yocto-docs rev: 779989878bcc9501ddc4570519d93325442a8493)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
these edits are on the fly with Saul Wold. Probably more to
come. They are eliminating some of the "new" wording and
other bullets that are out of date.
(From yocto-docs rev: 9e5da05f722e1e17af91e1831e34a69a3df79dcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modeled this after the re-write of the IMAGE_FEATURES
variable.
(From yocto-docs rev: 14f9e9926ad8abc0e2936ac59c90514406675bd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more explanatory text with appropriate links. Included a
link to the new "how-to" section in the dev-manual.
(From yocto-docs rev: 929185c387d9f745857786086750bf68cb4c7b9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created the first draft of the new "Setting Up Runtime
Package Management" section in the dev-manual's common
tasks chapter.
Updated the "Packaging - package*.bbclass" section in the
ref-manual to mention this capability and point off to the
dev-manual's new section.
(From yocto-docs rev: d91c8530dba20839f36c5e247cc447adbedac7fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are steps the user can take to create a host-resident
package feed (repository) whose front-end is Smart.
The setup allows the user to install packages from the host
feed during runtime on the target. The changes I made now
include that fact.
I also reformatted into a list some of the RPM limitations
and benefits as they now numbered such that I could list
them out as such.
(From yocto-docs rev: bb733ec59c9275071ff5ff017adc52073d4dcef8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second thoughts caused me to adjust this title again.
Also fixed the cross-ref in the FAQ.
(From yocto-docs rev: 0553790236c60d30306b796587cd5b5213456aff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some small, general edits. Added a few links to some terms.
Did a little re-wording in various places.
(From yocto-docs rev: 621c5094789921874461c6618b54e50e00a2d141)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note to the general wiki page where we show the
validated distros and a note to the specific RHEL wiki
page.
(From yocto-docs rev: 6bf7c8b6f0eecdcd9c646c9317e5cc46934a71d9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference to the TMPDIR variable.
(From yocto-docs rev: 13a21ed4db6e685f4497451d09dcefe945e52451)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some cross-references to some other parts of the YP
documentation. Also, re-orderd the list to be alphabetical.
(From yocto-docs rev: c2faf4ab4b9fd0ef2670f5c31deaa933b3119779)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "systemd" and "wayland" features. Also re-ordered the
list to be by alphabetical order.
(From yocto-docs rev: a68247e2f3da2563ca851898eea21bd83aa6853c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made sure the list of shipped (supported) images was up-to-date.
Had to add a couple. Also, some extra edits to support the
new list.
(From yocto-docs rev: db5bc1dd0079d0d8db67653a9878205d4b89258f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ross Burton suggested this might be good to have so I added
it. The changes include the entry itself and a link to it
from the beginning of the "Classes" chapter where it is
talked about.
Reported-by: Ross Burton <ross.burton@intel.com>
(From yocto-docs rev: 5b0263fa5e01706ccb815db51b8f1b7f86275721)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed the "meta/lib/" and "meta/files/" descriptions
beneath "meta/conf/*" to match the actual repo.
(From yocto-docs rev: 74b9cb2b42db7f6acd5a19a1856ede98ff29e775)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small correction to "build/downloads" as well.
(From yocto-docs rev: ae8cf055ba14c1223b0834d9acd662e3707dfc58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Broken link to Hob webpage fixed.
(From yocto-docs rev: 70f238f10641c20ab78314fe2bbb768560f31ea6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This whole section was very complicated and difficult to follow.
I have rewritten it to clear it up.
(From yocto-docs rev: 6ad1828eaa3e91b850696590cc732485a52f4cb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some minor edits to the "Other Variables Related to Commercial
Licenses" section.
(From yocto-docs rev: 8f58836ce31f01135c139890d6edaad628015c62)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this was really old text and had not been touched since the
original poky handbook days. It was terrible.
(From yocto-docs rev: 4f3efdbf2920f7d3f2d0d0526d08340c6204856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple cross-references for some general debugging
information within the manual set.
(From yocto-docs rev: d102e90fc9b24aa703eeb4488561058c258600d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a reference to the BSP Manual.
(From yocto-docs rev: f65c6d41bfe92c6bbc795982a1d1113e60cbf7dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various section heading titles were not using capital letters
for primary words. Fixed this up.
(From yocto-docs rev: da15d2ac3d043a0296a51d1a9fac69e7b4229f75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
These changes help tie in the relationship between how the OE
build system uses checksums and such and the PR Service that
can track revision.
(From yocto-docs rev: 39a3010a3bb4b2c1d37aef60984ac16e85b56aac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2790
Created a new section in the "Debugging Build Failures"
section to deal with host issues that cause a build to
fail.
(From yocto-docs rev: 9efc00146764086646b0c558d12168ab9813d683)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
three PNG files go away from the eclipse folder due to the
renaming of the poky-ref-manual to ref-manual.
(From yocto-docs rev: 29907784ecb509b3d4fba633b2c4970e4105bea2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds the three *.customization.xsl files. I
(Scott Rifenbark). Split the commit because after applying the
18 patches, the list of stuff to stage was huge and I did not
want to add them one-by-one. So I staged them using git add -u.
Here is the general cover letter information from Timo included
with the 18 patches:
-----------------
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
(From yocto-docs rev: eff391a17d0a2403634adfb2f4cd2ff50ad0b771)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
This patch set originally contained 18 patches. I (Scott Rifenbark)
had to push these changes as two parts. This is the first part.
It does not include creation of the three cusomization files.
(From yocto-docs rev: 9b1889f6e31ee70dae704fa08763fb9196616dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3838
First draft of edits for this class. Removed specific variable
definitions as they are now deprecated. Added a general
explanation of the variable functions. Pointed user to the
commented code in the actual class for details. Removed
statement saying that the build system supports only one
binary per package.
(From yocto-docs rev: bd574f2c8a95470c5a44500b70743a6e039522b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the question that asks "How doe the OpenEmbedded build
system obtain source code and will it work behind my firewall
or proxy server?". Some of the variables did not have links
or proper font type.
(From yocto-docs rev: be1f665b480a47483595381c9a837892100007e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added links for the PREMIRRORS and MIRRORS variables used in
the description.
(From yocto-docs rev: 1ec0f9cbeebeaeaadee8cc8b3631e6194c013a2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things fixed:
1. A couple examples for setting up a layer.conf file were
using the meta-yocto configuration file as an example.
Turns out this is a bad example because the BBPATH variable
is appended to the LAYERDIR when setting BBPATH rather
than the other way around. That is because meta-yocto
is a distro layer. BSP layers, however, are not distro
layers and are the norm here. So I switched up the way
BBPATH was set and actually called out meta-yocto-bsp
config file as a template.
2. Added a link for the BBPATH variable in the
FILESYSTEM_PERMS_TABLES variable description in the
glossary. Just happened to notice this so I fixed it
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1a594b6dde1a494a5f7322b510e1e67d23635298)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
I added more information to the variable desription in the
glossary for BBMASK. The information included a bit more
syntax information as well as some more complex examples.
I added more reference information to the "Excluding Recipes
From the Build" section to help better describe how the
BBMASK variable works.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f10f43a543e7b0892863e165d2902741a8823009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed YOCTO #3662
Updates to the description so _prepend is used to add paths
to the front of the search order and use of the variable
without _prepend just adds paths to the end of the
FILESPATH order.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 44c98058c1a75a9e6c95e4f33dbe1696e23d97d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
New entry added.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 73f8b28f6b6cea16cf63b99db88c961f87088fe1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3661
The value for FILESPATH was incorrect. I have replaced it with
the value found in base.bbclass.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: bc100cdd1bec48a65fcc4bed281f42953b1c9077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
Updated the section that declares what the default BB
Signature Handler is.
(From yocto-docs rev: e4c64add4a54e5583bf88fc71f00c90f7a1f6440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a cross-link to the new YP Linux Kernel Development
Manual up in the introduction.
(From yocto-docs rev: ba00acb1a0db9494b0d0ff1335f2532b5e2a7994)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also put in a cross-reference in the existing KERNEL_SRC
variable.
(From yocto-docs rev: 705074a16490155cd64469af3b2ea12a0780281c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. LINUX_VERSION_EXTENSION: Added a link on the
LINUX_KERNEL_TYPE variable.
2. Added a new variable description for the
LINUX_KERNEL_TYPE variable.
(From yocto-docs rev: f4ace3c64838044e2eb700af4b024a96ab1e2315)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Darren Hart's review comments. Namely, use the
example from the linux-yocto recipes and not the custom
recipe.
(From yocto-docs rev: 4a537a02bbf6fca4ff1a3beddd03d8115099cddd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about the variable being used to define PV for the
recipe.
Also, fixed a couple indentation problems with some nearby
variables.
(From yocto-docs rev: bec65049218c9c549fe8cd4d5c16e9d917e87866)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the examples used "startline" instead of "beginline".
Correction made.
(From yocto-docs rev: 1ed3ae72b0492e03b37dc2c9519cf37209a7034b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the folder that holds the YP Reference Manual to be
"ref-manual". This will help with confustion over the manual's
intended purpose.
(From yocto-docs rev: 1106442964b5080cb0b6b3bd3af32e9407c0f7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>