The "Poky Tree Mode" has been replaced with "Build System Derived
Toolchain". SDK Root Mode has been replaced with Stand-alone
Prebuilt Toolchain.
(From yocto-docs rev: 453f7c030e6d7625d382563e2f2ec569f76e95eb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Used clearer wording.
(From yocto-docs rev: faa35ea8cdb1747ba2b6b7717d1881830bed175b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated wording to reflect proper use of build tree terminology.
(From yocto-docs rev: 82b47279b55b6d15bf260e0903505fe578c985c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the command examples so the variables contained underscore
characters.
(From yocto-docs rev: 34bfceb14a04c5fa026486f33d32df7c21f8c742)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Armed with a better understanding of sysroot I made some edits to
help better define what is going on with the various sysroot
variables in the adt installer configuration file.
(From yocto-docs rev: 2b63e1f0f57c701eb38de7f9b9057567786b9899)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Small correction to refer to sysroot instead of root filesystem
in opening paragraph.
(From yocto-docs rev: e9af5bbd69ab9421a97ce87d5210d31838e93151)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note indicating where you can get sample kernels and
filesystems suitable for QEMU had a wrong path. I added
"machines" to the path. Also made a wording change.
(From yocto-docs rev: 75261eb7a44dcc990a817b5b59323042c38b6839)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example command I used to setup the cross-toolchain environment
was incorrect. I added the "1.0" to it.
(From yocto-docs rev: b8bb60ec69296e9c927735f3fca86013e8b2624e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Significant re-write to every section in this chapter except the
"Setting Up the Environment" and "Kernels and Filesystem Images"
chapters. I established some terms to communicate the build and
source trees and the build and source top-level directories for
YP. These terms had not been consitently communicated. I also
stepped through each of the three methods by which a user can
install ADT (and the cross-toolchain) and meticulously documented
the steps. The result is a much more complete and clear set
of procedures.
(From yocto-docs rev: 37076a07ccc748ceb416c4bc3a57b698f6e8d80a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I provided more detail in the section that introduces QEMU and tells
how it is made available to the user.
(From yocto-docs rev: 9145fee2d550af57669120b1b413585b69ab14bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual previously defined the "ADT" as the toolchain, the sysroot,
QEMU, and user-space tools. This definition was creating some confusion
when it came to installing the "ADT". Namely, some of the items you
don't even install, such as the user-space tools. So I recast the
definition of ADT to mean the cross-toolchain and sysroot. I cast the
other items as part of the overall development environment.
(From yocto-docs rev: 6ee891660d3b6bf6e2a3f4b5a872ade7a007ce02)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out that the package libtool is necessary for working with ADT during
the installation process. I need to mention this in the ADT manual but
it would be helpful if it was one of the packages in the QS along with
all the others. I added libtool to the package requirements lists
for the three supported hosts.
(From yocto-docs rev: 5f95fa1af0cfe9a97e437b8239e139479a1d5317)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Partial commit for supported distribution change.
(From yocto-docs rev: 4a84894dc2964f0153294b87f6205c432a482ac2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I included a new note to help users of pre-15 release Fedora enable sudo.
Along with this I repositioned the note about using non-supported
distros into the main text. Overall the section includes more information
and is organized a bit better.
(From yocto-docs rev: b0ae94b97ae46562ddde79df83462adf88b94527)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the packages section to also include the zypper command
and supporting commands so that the OpenSUSE user can install
packages.
(From yocto-docs rev: 3a9a0f7fb03bf264e1587d181db111a542e7964d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text suggesting that BB_NUMBER_THREADS be set to twice the number
of available processor cores and that PARALLEL_MAKE be set equal to the
number of processor cores. Similar changes were made to local.conf
based on work by Josh.
(From yocto-docs rev: e342a4af4d3ba000b348bbb9d125977fc0e95273)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the note that tells users YP must have Python 2.6 I added Python
2.7.
(From yocto-docs rev: 611ad6331a8b3e1acc98f2029a181a92f32220e0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entry previously stated that only Python 2.6 is required. I
added Python 2.7 to that requirement. I also changed the URLs that
point to our pre-built tarballs from which the user can get Python
2.6 to be in the yocto-1.0 download area. They were pointing to
an area in the index of downloads that was up one level. According
to Beth the official location is
http://autobuilder.yoctoproject.org/downloads/miscsupport/yocto-1.0- \
python-nativesdk.
(From yocto-docs rev: f5ba36dee8094209fa6d3c6f97656588ded0567f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104: The section that describes how to customize images
with new features failed to mention the variable EXTRA_IMAGE_FEATURES.
I added text to include that option and referenced the variable.
(From yocto-docs rev: 128b53594be02e486ca3f4658b9f93b9913a3972)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104: The section describing the local configiuration file
local.conf lists out variables used. One variable it had in there
was IMAGE_FEATURES. This variable is not in local.conf. But,
EXTRA_IMAGE_FEATURES is the variable that is there. I corrected this.
(From yocto-docs rev: 2698d0fc61adc8971a84436529a54190c998d4d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Images reference section states you can control what features are
in an image by using the IMAGE_FEATURES variable. It failed to mention
the EXTRA_IMAGE_FEATURES variable. I included this variable in the
discussion.
(From yocto-docs rev: 6c7789bd409f43a3978c09c43db31010bc461573)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a cross-reference to the EXTRA_IMAGE_VARIABLES glossary
term and provided more explanation describing the relationship
between the variable and the IMAGE_FEATURES variable.
(From yocto-docs rev: 227c11b8d81e9ae266b7e60172d0a5e9e1237ed0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
YOCTO #1104 - Added a glossary entry for the EXTRA_IMAGE_FEATURES
variable.
(From yocto-docs rev: f81a85322d944d33484da73020593891811a045a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed several instances to the 5.0 Bernard release. I replaced
these with the 5.0.1 release. I also re-wrote a paragraph that
instructs the user on where to find and download the most recent
YP tarball. It used to point to the Index of /Downloads into the
"yocto-1.0" folder. I now instruct the user to go to the
Yocto Project website and download the desired release from there.
(From yocto-docs rev: 30b5163730139b2b852d64c87a7e710b7fcc7dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an entry to represent the Yocto Project 1.0.1 Release into
the manual history table for all of the manuals except the Yocto
Project Quick Start, which does not have a table.
(From yocto-docs rev: d2c570b18854b3f15dfb20436a2212f569e96d5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID#_1025] - I added some conditionals to handle the
Yocto Project Quick Start case. This manual does not have
a PDF version. I put in tests for publishing and for a case
where a user might attempt to specifically generate a PDF
using 'make pdf'. I also converted the version variable into
a command-line argument so we don't have to edit the make file
when a new release comes out.
(From yocto-docs rev: 8e98871c9771096ec635f592cca752c63697bd5e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was some URL problems with the publish statement.
Beth debugged it.
(From yocto-docs rev: 6c13bce3cbdd576463f5e3b1e61ab6f4046e47c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes fix the following issues:
1. Multiple Makefiles. There really is no need for this.
2. Unable to maintain more than one version of the docs on the webserver.
This is a quick fix to enable the above.
In order to build the documentation, at the top level, issue a:
make all DOC=<doc directory name>
make all DOC=kernel-manual
Also, some changes need to occur on the webserver to fully
incorporate these fixes.
http://www.yoctoproject.org/documentation/
The docs are now published to:
http://www.yoctoproject.org/docs/<Release MM.mm>/<doc name>
The main page should be changed to point not only to the current doc release,
but also to the prior releases. This will enable us to maintain prior release
documentation without stomping over it when we publish new docs. Also, we'll
need to repoint the yocto-quick-start link to yocto-project-qs. Or rename
documentation/yocto-project-qs/* to support the website naming.
(From yocto-docs rev: 2651790d80fd32cd4619eeb5375f6ee28e7e7fda)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new FAQ entry per Richard Purdie answering the question
'How do I use an external toolchain?'
(From yocto-docs rev: 58b78df0d78637234cbcb0e70e225b72ba0f9a2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Evidently the command 'runqemu' is not a valid command for Bernard.
I changed four occurances of 'runqemu' to 'poky-qemu'.
(From yocto-docs rev: 0296920cc07a6fb9871c5af4bb991fcee2949564)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the example for building an image the command
'source poky-bernard-5.0/oe-init-build-env poky-5.0-build' was used.
Torsten Scheck notified Jeff Osier-mixon and sent the fix to
change to 'source poky-bernard-5.0/poky-init-build-env poky-5.0-build'
I made the change.
(From yocto-docs rev: b96646efb203e482d53d922fb120672df5a09966)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_1083 - I added the -k option as part of the bitbake command in the
example that builds an image. I did not explain it as that is beyond
the scope of the quickstart. I did however point the user to where
they can find information on it.
(From yocto-docs rev: 620351d38c67ff14cefc7a52bbc0e98789011677)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the section 2.1.1 BitBake I added a paragraph at the end of the discussion
about BitBake explaining the benefits of the '-k' and '--continue' options.
(From yocto-docs rev: 409e01cedbe8d93c29856fa2a49d5f9db91f5201)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more explanation about the base directory (meta-<bsp_name>) to the
Example Filesystem Layout section. These changes were suggested by
Tom Zanussi to help users understand better how to add BSP layers
to the build system.
(From yocto-docs rev: ced445910363b2f10b5b5ca72236f54ae4b7e050)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new entry for we do not support spaces in filenames.
This entry was suggested by Richard.
(From yocto-docs rev: 27d7f951056fb55bddcd7a71374359583c635073)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the 'BSP Click-Through Licensing Procedure' section there was an
old link to the BSP download page on the Yocto Project website. The
link was non-functional. I fixed the link so that it points to the
Yocto Project BSP Download page. I also re-wrote the paragraph to
read better.
(From yocto-docs rev: b87714fa54f71aa061126b7f29d80723a90818e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.3 Pre-built User Binaries' section it said that the
ADT and minimal images were kept in the optional
meta-<bsp_name>/binary directory. Jianjun Xu pointed out that
in fact it is just the minimal and sato images here. I also
confirmed with Tom as well. I re-wrote this sentence to be
clearer and more accurate.
(From yocto-docs rev: 6757abff52841b5d1e1991ab22314fa7a243a87d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the '1.1.4 Layer Configuration File' section there was a BBFILES
statment that used the '\' character to indicate a continuation of the
command on the following line. However, the example did not use
a new line. I added the hard-return to correct that in the example.
(From yocto-docs rev: 185352ae2f5879a8418715053f3791b167bd6d7e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the example BSP name 'meta-intel_n450' to 'meta-n450' in
the section 'Example Filesystem Layout.' Error found by Jiajun Xu.
(From yocto-docs rev: 0dd6f97dcc51cec4bae96ca0430af9300619749f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a newer version of the yocto-environment.png file that has
OE-branding. This is the figure used now.
(From yocto-docs rev: 094c0c9661ec1c00da2a1fd0ab4818c0075a8b52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the hello_2.2.bb example to hello_2.3.bb
(From yocto-docs rev: b1d07533b82a37aa5e52ebdbb3e9629e2b8ba549)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The command used in the example to build an image was using
'bitbake core-image-sato', which is only available in master and
not Bernard. So, I changed the command to be 'bitbake poky-image-sato'
at Dave Stewart's request. He located and pointed out the error.
(From yocto-docs rev: 3fa83550aaec5a3549825814a77fa7a823a2daea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the hardcoded name from the publish option. This involved
updating the Makefiles. The publish option is still temporary as a
more permanent solution is being created.
(From yocto-docs rev: 6878b2ccdb98b18c438ca419e1caad0041a2bc00)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the hardcoded name from the publish script.
(From yocto-docs rev: 31f4b6c46944deb055f44fdbe2bdd93b97331849)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_807 - I updated the description of the BBFILE_PRIORITY variable
to provide more detail. Input from Tom Zanussi on this fix.
(From yocto-docs rev: 90f9fd0c3bcf5c772423fa53f1f00579eba1bdeb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The directory screenshots is no longer used in this manual. Previously,
only one file (ss-sato.png) was used and I have moved it to the
figures folder.
(From yocto-docs rev: 1c75a62b33910ff951601dedd32b79bebb41090c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have removed the multi-colored POKY image that was used for
the title of the Poky Handbook. The image I put in here is in
line with the other graphics used as titles for our Yocto Project
documentation. To accomplish this I had to create and add a new
PNG file named poky-title.png. I placed this image in the figures
folder. I removed the poky-ref-manual.png file (old figure).
I also had to alter the Makefile to use the new figure as part of the
tarball. Finally, I had to alter the HTML style sheet (style.css)
to include the new file.
(From yocto-docs rev: 6c44fca054c1c105daea6fa42f89a7f78a6d12cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved this file from the screenshots directory to the figures
directory so that all figures would be in the figures directory.
(From yocto-docs rev: b61915e6cdf7dfedc4588cd59f252088a1069b65)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed two figures from the figures directory:
cropped-yocto-project-bw.png and yocto-project-transp.png.
Both figures are relics and not used in the manual. I also
altered the Makefile to pull the ss-sato.png file from the
figures directory instead of the screenshots directory. I moved
this PNG file from the screenshots directory to the figures
directory so that all figures would be in the figures directory.
Finally, I updated the introduction.xml file so that the html
code to include the ss-sato.png file pulls it from the figures
directory and not the screenshots directory.
(From yocto-docs rev: daa15c232d8c46d94cafd080e03318c733ec089f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_956: I updated the publish option so that the HTML and PDF
versions of the manual are automatically pushed to the Yocto Project
website. This fix takes care of BUGID#_956 for the Poky Reference Manual.
(From yocto-docs rev: aed87d15ce9df0835b704fda1e9d8f464d070e32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed the figures/kernel-big-picture.png file as it is not used
in the manual. I also had to update the Makefile so that it would
not include this PNG file in the tarball.
(From yocto-docs rev: 461ab9525d16dbbdf5f5c56c16028cae911309b9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_956 - I updated the makefile so that the publish option automatically
pushes the HTML and PDF files to the Yocto Project website. This takes
care of BUGID#_956 for the Kernel Manual.
(From yocto-docs rev: d67a05f2256df63e182e43f8dd10ec7a54763762)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed this PNG file as the picture is not used in the manual.
(From yocto-docs rev: be06cb5854d66974606616c73c9574152bf80973)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
BUGID#_956: I updated the Make file so that it will push the HTML and PDF files
automatically to the yocto project site. This takes care of
BUGID#_956 for the BSP Guide.
(From yocto-docs rev: 684f1836056c977c08a27a0a80d622e360977919)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed this figure as it is not used in the manual.
(From yocto-docs rev: 6fa2c18a7ea647386a113e0e50860d66ecb83e4a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the makes file so that the HTML file and the CSS file are
automatically published to the appropriate directory in the Yocto
Project website. Also the PNG files (4) are published to the directory's
'figures' folder. This fixes BUGID#_956 for the Quick Start manual.
(From yocto-docs rev: e315f2ca65c5003e2ad02bd89f0850a79dc548bf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two figures (cropped-yocto-project-bw.png and white-on-black.png)
were not used in the manual. I removed them from the figures
directory.
(From yocto-docs rev: 45bbf6566e034fe47e5fd6afe8ddb7de7f021443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was an occurance of 'the the' in the manual. I removed it.
(From yocto-docs rev: fae94d71d74434abd8d306a045cdb95efe1dd9b3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several changes made so that the HTML and PDF files as well as the
CSS style sheet and any PNG figures get published to the Yocto
Project website in the ADT Manual directory. This fixes BUGID#_956
regarding the ADT Manual.
(From yocto-docs rev: 4dde2130b6ee6816f2cf012fc488c972bdd668c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This figure is not used in the manual. I removed it.
(From yocto-docs rev: 3fb4d33727f24382a96e4ad8fe110706af113be1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the remote publish URL so that the HTML version of the manual will
get pushed to the yoctoproject.org site automatically.
(From yocto-docs rev: a83537af7d44357a71f66ca1105e2f44089f4fb5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the remote publish URL used to push the HTML and PDF files to
the website.
(From yocto-docs rev: c5c170c582ca0a483aca13b7ddaa7f4d99a3aaf9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the URL used to publish the HTML and PDF docs to the
yoctoproject.org server and website.
(From yocto-docs rev: 887a007ae9203317e0bbb7e8b2c5be3843aae3dc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the URL for the manual to the rcp publishing process. This
is part of the fix for this bug.
(From yocto-docs rev: 4d25c5e1cd6f0b067d0a88fbde1ac6df7066dfa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the publish statement so that the HTML and PDF files will
be published to the Yocto Project website.
(From yocto-docs rev: 3b09ca5ee4e1919dbc72d680064083271dec544c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a reference to the pokylinux.org home site. I commented this
item out so it does not show in the user documentation. I was unclear
on whether the reference should have been entirely removed from the manual
or not.
(From yocto-docs rev: 1cda8aab1336cc81648536e1f7d2777047673a64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a link whose URL was http://autobuilder.pokylinux.org:8010.
I changed the link to use yoctoproject.org. Note that this URL
was not visible to the reader in the manual. However, it was there
in the DocBook code.
(From yocto-docs rev: ca1cf9fb404f148fe4f0868630dc4f109231c5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID#_1004] - The statement indicating to comment out EXTRA_IMAGE_FEATURE was
incorrectly shown as IMAGE_EXTRA_FEATURE. I corrected this.
(From yocto-docs rev: e18da2d4e4520a60045f869ca0c63a34c16e3e89)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Substituted 'pokylinux.org' with 'yoctoproject.org' in an URL
to locate the OProfile viewer and server.
(From OE-Core rev: 6e2553b07be5f06a68f0967775111d7598d9404f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a stray "0.9" in an URL for the Yocto source downloads.
I changed it to 1.0.
(From OE-Core rev: 82890a85c0422aa6b081497be394aa756da567b2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The link to autotools was incorrect. It had 'www' in the URL
when it should not have. it is now
'http://download.eclipse.org/technology/linuxtools/update/'
(From OE-Core rev: 56965da0631d4619282b5548fc19118429183507)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got rid of the <filename class='directory'...> and
<filename class='extension'...> and replaced with simple
<filename>/</filename> pairs.
(From OE-Core rev: 1bcdaf8d3d39680c154144227ee2caca9a7bb3e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In section B.1 (Parsing) it said that BBFILES variable by default
specified the direcotyr 'meta/packages/' as the place to look for .bb
files. This directory is invalid and needed to be changed to
'meta/packages/'.
(From OE-Core rev: c48325b1f23201a1e7790bfd7c52191baf14878f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Due to some changes in the file structure for 1.0 there is a new directory
for the shared state. The variable SSTATE_DIR can be used to point to
the directory. I added this variable to the list of documented variables.
(From OE-Core rev: fe939d7181856145ea26c193be131883da182fcd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits reflect changes in the directory structure from the 0.9
version of the software to the 1.0 version. This set of changes still
is missing a few items. Changes were based on Saul Wold's input.
(From OE-Core rev: 6288e2af1b05d849e53b90071c66bc893ba015b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the various styles for commands and such and replaced with
simple <filename>/</filename> pairs.
(From OE-Core rev: c5a0cc3e6a2f1e7eb1a90c67d2a038d3dc18b1ba)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section C.2 (Autotooled Packages) was re-written. I removed a bunch
of <variable> tags and replaced them with <filename>. Also removed
some Britishisms.
(From OE-Core rev: 7a932962fb8f0dbfe14eb2d3636ddbb1c974b947)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to fix the <variable> tag by replacing it with <filename>.
Previous commit didn't work so this is fixing it.
(From OE-Core rev: 263e572055b09ad2f432f1feda797813ef254e74)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I got rid of the <function> tag and replaced with <filename>. We
have too many styles.
(From OE-Core rev: 5ac97ba191c8707ff20105626427998df997d221)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section B.4 (The Task List) had the typo "taksks". Changed to
"tasks."
(From OE-Core rev: 7cbd6bb020e16ceb1894a408852648a915f193f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section B.2 (Preferences and Providers) had a grammar error.
It said "An common example is..." I fixed it.
(From OE-Core rev: 6d04a9ff381b7771b6f080928d4416b76e76cbb0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I replaced varname style with filename style. Looks better. We have
too many styles.
(From OE-Core rev: 1b63d69c3c2e4b5561dc59d020b59d875420872f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section A.1.1 (bitbake/) contained two URLs. One supposedly went to
a BitBake site and the other to the BitBake online manual. In reality,
they both went to the online manual. I removed the one referencing
the site.
(From OE-Core rev: 02c360c3e57409a3982db73ed2b998a7c58610a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 5.3.2 (Using OProfileUI) was out of date. Several of the URLs
would not resolve. They were pointing to openedhand links that had
not been maintained. I updated the entire section.
(From OE-Core rev: 4678fcba5ab02669009d0ab67ec802f2ce1b087f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In section 5.2.2. (Building the Cross-GDB Package) there was a resulting
directory listed where you could find the binary. The directory had
a couple of variables for 'host-arch' and 'target-abi'. There was
a mis-guided angle bracket wrapping the 'host-arch' variable. This
was fixed.
(From OE-Core rev: a4fbf5caabb9ded34885612ae093759c82d7d2cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the URL that points to the Yocto Eclipse Plug-in to
http://www.yoctoproject.org/downloads/eclipse-plugin/1.0.
(From OE-Core rev: 6657ee7563efecdaa091ef614c5c1e20a2a4665e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I commented out a large section of the chapter, which went into detail
on how to locate, install, configure, and use the Yocto Ecliple
plug-in. This information is redundant in this book and is better
explained in the ADT Manual. I am referencing the information from
this chapter now.
(From OE-Core rev: f4f4efbf3f0b19fdb05ddf48ab48b4f42109a289)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the revision history table for the manual.
(From OE-Core rev: 65c7bb8489de654cc02dcff0dfff21754e2e5ce8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a few small edits and I added a reference to the
wiki page 'https://wiki.yoctoproject.org/wiki/BuildingOnRHEL4'
that has entries for older development hosts. Right now all that
is there is the RHEL4 notes but the wiki page can be expanded as needed.
(From OE-Core rev: a23acbd48ee911d9882a78491280977fb62ea156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "YP" from another spot in the manual.
(From OE-Core rev: 22f701b97a8d1412638f5ae79343a37791dde9e6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some reason the PDF version of this manual was not being included
in the tarball created by the Makefile. I fixed this.
(From OE-Core rev: f8ec09ab31c04b2ae9570b71174f50c58ad09f00)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In chapter 2 where we talk about building images I added a new
note indicating that the user should not switch around using different
GPL versions when trying to rebuild an image as it can cause dependency
failures.
(From OE-Core rev: f84441dbcc8254062d55d2452d3d6f4bc6f907fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I removed this YP acroynm since we never use it.
(From OE-Core rev: b37cab45b4f0dbba0dedbbbe240e91db30df4b8c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note in the "Installing the ADT" section (2.1) saying that
if you need to build the ADT tarball you can use
'bitbake adt-installer'. I also changed the location of the
toolchain from '...yocto-0.9' to '...yocto-1.0'. Finally,
I changed the host sub-directory in the toolchain directory
from 'i586' to i686'.
(From OE-Core rev: 18124c5065fc570e672d068e915e0f476d20379c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 931] - I have removed the Note indicating that the user must run
'bitbake make-native' if running Fedora 14.
This is no longer a requirement for YP Release 1.0
(From OE-Core rev: 33a529f94c494531dbbfca5050898eb4c42f64df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quick Start there is a note indicating that you should run
'bitbake make-native' followed by 'bitbake poky-image-sato' if you
are running Fedora 14 or another distribution that ships with GNU.
Colin Walters submitted a patch that offerred an URL for further
explanation on a Make Bug. The URL is
http://www.mail-archive.com/bug-make@gnu.org/msg06220.html. Rather
than submit Colin's patch verbatim I updated the note to include the
reference with a little different wording.
This extra information submitted by Colin will be very helpful.
(From OE-Core rev: d32ccd0ce620942447c7b49c6117c2ea7eff46ff)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 873] - Added a note in the Images Appendix indicating that
building an image without GPLv3 components is only supported for
base and minimal images. Also put the two changes you have to do
to the local.conf file for the build.
Added a note in the second chapter in the section on building images.
The note indicates the same as in the appendix but does not go into the
local.conf file detail.
(From OE-Core rev: c7960a2e820d7ddb8649ab0b27b3f04843f7af0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note to reference the FAQ entry in the Poky manual that describes
how to get around proxy and firewall stuff hanging up getting the source
code during a build.
(From OE-Core rev: f9abba290157c122f36aed5e52f1a0f792e3add2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the beginning of the manual I added references to the FAQs we
support.
(From OE-Core rev: 615a015189f3b09ea928f288516be1f90447cbf2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is first guess at the correct example commands and directory
names for the Bernard 5.0 release. I don't have any real directories
available to look at and doc changes are supposed to be frozen before the
actual build. So these are guesses and will need reviewed.
(From OE-Core rev: c052537216395019bc436291e1c2ec43c3abc3ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to update the note and tip text color to white to match other
books.
(From OE-Core rev: 6d091c39d040525becf5b5ef719356d5d1e43bdb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the style sheet to use Yocto blue for the headings and got
rid of the green tip and note stuff. This style matches the other
style sheet now.
(From OE-Core rev: d8661de305adcb95c281238255cd84e1c41d5469)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 857] In the packages section for the list of Debian-based system package
requirements I added 'groff'.
(From OE-Core rev: b67204a99fe34a165f97dd6bb5191735a4632678)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is an explanation on how to get by the proxy or around the
firewall when Poky is trying to find and download sources.
(From OE-Core rev: 426df8458bb37c81afc6fe03f0e1300985c8d059)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the path 'meta/packages/formfactor/files/config'
to 'meta/recipes-bsp/formfactor/files/config' per Joshua Lock's
instruction for correctness.
(From OE-Core rev: b89ea64db2978f0ec9271565590a5a0529d396f1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various small edits and format changes.
(From OE-Core rev: 259128eb1b7676a71d5c0df4ef5db065ba5c3c88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made some minor edits.
(From OE-Core rev: bb6fbb484ec912aabca77fd4d124c97fc7f956e1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added three FAQ entries per Joshual Lock.
1. How do I disable the cursor on my touchscreen device?
2. How do I make sure connected network interfaces are brought
up by default.
3. How do I create images with more free space?
(From OE-Core rev: 9cfed91ee7c0a619e52abc098c20d6ed8b69416b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Forgot to search for "Bitbake" occurances. These are now changed
to "BitBake."
(From OE-Core rev: 982826b61bf68244fad46ef52b5a203e648e330b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a grammar problem and then did a search and replace for
"bitbake" to replace with "BitBake".
(From OE-Core rev: a25074cf7f3383ea3963c4dabb9507af34f2e3df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed several occurances of "Yocto Project" to "the Yocto Project."
Also changed the statement about what Poky release the book supported.
It previously said "applies to Poky Release 4.0 (Laverne)." I changed
this to "applies to Poky Release 5.0 (Bernard)."
(From OE-Core rev: 021bc37ad0698c567f9b7089fde99fe985ae3551)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed a link to the Intel Website. Upon testing this link I
discovered that it loads the Intel site into the current web
page and then disables the back button. Rather annoying. I tried
to change the link to pop a new window but couldn't get the
ulink.target parameter to work. Ran out of time to try and figure
it out so I removed the link.
(From OE-Core rev: 8f75a06300714938e79800e0e140dd76ba42de86)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and corrected several problems.
(From OE-Core rev: e26e9f41eac1bb34a7d9276921d14e843444622d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the title page by adding a new revision entry for the manual.
Not sure of the current revision numbering scheme so I reset it to
Revision 1.0 to match that of the release.
(From OE-Core rev: 1604f6543eba3757b08bff96e75d045b809de544)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have updated some styles so that the GIT manuals are looking more
consistent and have better color schemes for the section headings.
(From OE-Core rev: 747dbbf250b96cf43eba2b7227226607b9605da4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A spell check performed on this chapter.
(From OE-Core rev: 20ef5e573e0c835a2f359f61aa89993c3a2244a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 293] - I added text at the end of section 3.2.3 "Customizing Images
Using Custom IMAGE_FEATURES" to include explanation of the two servers
Poky uses for images by default. Also how to change the variable
IMAGE_FEATURES to configure the server. This change is part of the
fix for BUGID# 293 and was suggested by Scott Garman.
(From OE-Core rev: 13041874070ea2235f8c3abe156ae5e940b15f5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and found a couple items.
(From OE-Core rev: 45039d008519c13f97d9b195bba4505b3865b5ea)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the title page to add Revision 1.0 to the Revision history
table.
(From OE-Core rev: 5062c0e09b5e2c4894ccfe322977fdd432b87e39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Performed a spell check and caught a couple small things.
(From OE-Core rev: 17ae7d1e05df495a5e27168cdcdfbcf96337a3f9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the HTML style sheet to match that of the other online
manuals. Section heads are now in Yocto blue and tip box
color is inline with Yocto color schemes.
(From OE-Core rev: 815b71a6c66e529959a12bd9aa6aabc0afc78bb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the revision table for the manuals to have better
wording and to go from oldest to newest top down.
(From OE-Core rev: 7a4f802bb4d12f863a13fc4ba095a3de149aa6df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure for the title so that it uses the same color
scheme as the other manuals.
(From OE-Core rev: 23c40367c56e838bb9c1ad89cec8ca2e563a40a7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the revision history box for the manual to state the release
and the release date.
(From OE-Core rev: 15f5307f78899a10358ef426cadf5bc792d11d88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Jessica flip-flopped on the need for the Autotools plug-in that was
removed from the manual. I have re-inserted the instructions for adding
this plug-in in as part of the Eclipse set up.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 4.1.3.4 discusses custom options for when you want to run
a QEMU image. Jessica felt that we needed to stress the fact that
the options "serial", "nographic", and "kvm" must all appear outside
of the angled brackets.
(From OE-Core rev: 845770e12b6ed51db3179f42de6b8deacdff5093)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section 4.1.2 lists plug-ins that need to be installed prior to installing
the Yocto Plug-in for Eclipse. I removed the Autotools plug-in
requirement per Jessica Zhang's instructions.
(From OE-Core rev: 94e3971c95e0549a0857f07e1a38d7b7628f0022)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial draft of the Using the Command Line chapter.
(From OE-Core rev: 76bbb867d6e4e9c49c9d4a2d9c453d0cdf692c44)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial draft of the Eclipse chapter.
(From OE-Core rev: 44512573d62fa5e209bf227d6811f9a94ec42372)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file is the initial XML file for the chapter on optionally
customizing the development packages installation.
(From OE-Core rev: 2e3d29d493d6a3be006e80e75e41a0ff9ad29564)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial draft of the preparation chapter (chapter 2).
(From OE-Core rev: c32b215eb37828cd31c0c9ba288c2216fcd034de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit is the initial text for the introduction chapter.
(From OE-Core rev: 7c0899aa6d712e373bd1a2df1fb52dcf3a87b2fe)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The .aurthorgroup style uses a 'background-image' item to add the
book title image. This had to be changed to 'figures/adt-title.png'
from 'figures/kernel-title.png' since it is for the ADT manual.
(From OE-Core rev: 4c9dda2ac52139f67dc8e461c9f68a5d97d4690f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initial chapters were failing to make due to duplicate section
identifiers that were created when I copied in the original files.
I gave each of the five chapter files (adt-command.xml, adt-eclipse.xml,
adt-intro.xml, adt-package.xml, and adt-prepare.xml) unique identifier
tags.
(From OE-Core rev: d30460c835c51dcc9301bcd848ceda29ba9ceeb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits take the Makefile from the version I copied over from
the Kernel manual to create the initial version for the ADT Manual.
(From OE-Core rev: 50c61a4fe2f4ad65d6934a3ec3799e6a64709ed3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the initial file that the Makefile calls. The changes in this
commit reflect edits taking it from the copied kernel manual version.
(From OE-Core rev: a7c2c126e4ab12e4ba13cd4cfad70b6556739bc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the title PNG file and removed the existing (copied)
kernel title PNG file.
(From OE-Core rev: a4a9c47c1bd1e53652f73cc76f781f1c5df8adcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have added a new directory to documentation named adt-manual.
This directory holds a Figures folder, and the 9 files needed
for the ADT manual. The book consists of five chapters:
adt-intro, adt-prepare, adt-package, adt-eclipse, and adt-command.
There is also a adt-manual.xml file called by the Makefile.
There is also a style.css file. And finally, a adt-manual-customization.xsl
file to control numbering.
(From OE-Core rev: ac2c8848bbefcf7d24192573904baaef87c67382)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Upgraded to reflect 1.0 usage rather than 0.90 usage, and some other
clarifications and minor changes.
[RP - added tweaks suggested by Darren Hart]
(From OE-Core rev: c6f06f478ac229c4619f815b8b313711d47b1551)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- use linux-yocto instead of linux-yocto-stable in examples
- change branch names to match linux-yocto usage
- remove outdated 'wrs' where it appears
(From OE-Core rev: 7f1662ef01b383c9fecb2b30ade50de97f17529a)
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Modifications to the figure image (figures/kernel-title.png),
the heading styles (style.css), and the numbering system with
TOC display (yocto-project-kernel-manual-customization.xsl).
I updated the title image to display the manual title using
color #00557D, which coordinates with the Yocto Project website
color scheme. I also updated the style sheet to use this same
color for the section headings. This helps to set them off better
from the text. Finally, I flipped the switch back on for this
manual to create chapter-specific table of contents sections
prior to each chapter and to include a all-inclusive TOC at the
beginning of the book.
(From OE-Core rev: 2f24addbd02039fb9b6489c90c5d1c687c0d0698)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the font to Arial Narrow and inserted a better logo.
(From OE-Core rev: 7b84f126b09125b306ea9f9b59c437bb741800d2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the revision history on the title page to reflect the upcoming
Release 1.0. I will likely have to change this as we get nearer the
release so I can be sure of the number and also add meaning release
remarks to the entry.
(From OE-Core rev: 5ba502311221c3a476465d148fcfecf557fbfe79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the email address for Richard Purdie in the author title
page to richard.purdie@linuxfoundation.org.
(From OE-Core rev: 86e355f489437c4d20a717617d203a8a5aa1371a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 695] - I updated the title to use a less bold and intrusive
font and one that is still common for systems. Also removed the
"s" in the title so it now reads "Board Support Package (BSP)
Developer's Guide." I also put a better looking Yocto logo in.
Once this commit is merged bug #695 can be marked resolved.
(From OE-Core rev: f6d9338bf98f2f6791231a5ff74142833ae1363e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the 'BSP Click-Through Licensing Procedure'
section, which is shared between the BSP Guide and the Poky
Reference Manual, there were three links to 'pokylinux.org'
sites. These links were intended to help a user get a license
for encumbered BSPs. However, the links never did work. The
section also had some wording that described a propsed naming
convention for BSP tarballs that were encumbered and non-encumbered.
The naming convention is a good idea but has not been followed
so far.
I removed the links and replaced them with general instructions
on how to get through the licensing situation. Also removed the
hard-line naming rules and replaces with a more general explanation
of how we are naming BSP (e.g. Crown Bay).
(From OE-Core rev: 4c2dcb376b4be0778cab97138fefdb8a27a0e708)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In appendix I in the Contributions section (I.6) there is
mention of a Poky contributions tree and the URL
git://git.pokylinux.org/poky-contrib.git is given. I changed this
URL to git://git.yoctoproject.org/poky-contrib.git.
This is a partial fix for but 553.
(From OE-Core rev: 982ff35cad0276eb74eae170d21ead0edd3a1072)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text after the bulleted items "The Poky website" and "BitBake Uer Manual."
These were blank and it was not consistent with the rest of the list.
(From OE-Core rev: a820c07796dc478154b7e5ee4e590a425b981e8a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the "Bugtracker" section (appendix I - I.2) there is
a reference to the bugtracker. The text shows just the string
"bug tracker" but the hidden URL was http://bugzilla.pokylinux.org.
I updated the text to say to report problems by using the Bugzilla
application and then gave the URL http://bugzilla.yoctoproject.org
as the reference.
This is a partial fix for bug 553.
(From OE-Core rev: 94f7132e56699c9f9f8dc43d6a1271294c5cbe26)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the FAQ appendix item H.12 there was a reference
to http://pokylinux.org/sources/* in the question portion. The
reference should really be http://autobuilder.yoctoproject.org/sources/*.
I made the change.
This is a partial fix for bug 553.
(From OE-Core rev: fb56ac6021fe09cb386c168f3fe0b11e04214972)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Anjuta Plug-in" section (5.1.2.2) there was
an URL to the source for the Anjuta Plug-in. The URL had the
pokylinux.org string in it and pointed to the old area. I changed
the URL to http://git.yoctoproject.org and directed the user to
look under IDE Plugins.
This is a partial fix to bug 553.
(From OE-Core rev: 0a1d8f48c8a2120ba57017e1fcf270c677486266)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In "The Eclipse Plug-in" section (5.1.2.1) there were two
URLs referencing the place to get the Eclipse plug-in. One specified
the URL to put into the HTTP:// field in the Eclipse IDE when installing
the software. This URL was incorrect. I replaced it with the correct
URL, which was http://www.yoctoproject.org/downloads/eclipse-plugin/.
The second URL that was fixed was referencing the source code for the
plug-in. It had the old pokylinux.org string. I changed it to
http://git.yoctoproject.org.
These fixes partially address bug 553.
(From OE-Core rev: 6871c913e0dae338708f74dbbe94cfe2fc498018)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Development Checkouts section (1.5.3) there was a
reference to our git repository located at git://git.pokylinux.org/poky.git.
I changed this to git://git.yoctoproject.org/poky.git. This is a
partial fix to Bug 553.
(From OE-Core rev: fe4ed51c121b8f1445a0999e411c54270321e025)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Releases section (1.5.1) there was an URL to
http://pokylinux.org/releases. This URL was old and I replaced it
with http://yoctoproject.org/downloads/poky. This partially fixes
bug 553.
(From OE-Core rev: e66d4b53c773d76f2f05c574132796e2fdcf6ebd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the Development Checkouts section (1.5.3)
there is a reference to
http://git.pokylinux.org/. This URL resolves to an older looking
source area. I determined that the URL
http://git.yoctoproject.org/ resolves to the newer Yocto source
web interface so I changed the URL to that.
This is a partial fix
to Bug 553.
(From OE-Core rev: 18f0124db5c10ea23698ca0c469d4dfde89adf43)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[BUGID# 553] - In the nightly build section (1.5.2) there is a reference to
http://autobuilder.pokylinux.org/. This URL resolves to an autobuilder
page that has a bunch of pokylinux links. I determined that the URL
http://autobuilder.yoctoproject.org/ also resolves to the autobuilder
page so I updated the URL to use the YP link. This is a partial fix
to Bug 553.
(From OE-Core rev: b1c7055dead4badd14872105c49466cbf86d3b54)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added command 'ls meta*/recipes*/images/*.bb' as the command to see the
supported images. Also added poky-image-lsb as an image and noted
that poky-image-sdk has becom poky-image-sato-dev.
These fixes are in response to alpha testing for release 1.0 Yocto.
(From OE-Core rev: aa2bdf7c26486961e040c95f17789064968eb9c0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added "Copyright 2010-2011 Linux Foundation" under the title. For
now this will have to do. Once we get the converted website up I
would like to see all manuals displayed as HTML files within the
context of the site layout. At that point we can have a copyright
and trademark stuff in a persistent footer.
[BUGID #696]
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
As part of the fix for #628 I added a new question to the FAQ for use
of Poky when you do not have Python 2.6.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Part of the fix for Bug 628 is to add a note that bitbake requires
python 2.6. I added this note before the example bitbake command
that builds an image. I also added a linked reference to the Poky
Reference Manual and mentioned the FAQ appendix. There will be more
information about the python requirement in the FAQ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I made some updates to the 3.4.4 section according to Bruce Ashfield's
feedback. I also added a new section 3.4.5 (Creating a BSP Based on an
Existing Similar BSP Without a Local Kernel Repository).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added text after the sample bbappend file stating that the user needs
to update the KSRC assignment statement and also remove its comment.
Also they have to remove the comment from the SRC_URI line.
Changed the bitbake command in step 4 to use the linux-yocto-stable
file rather than the linux-yocto file.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Changed 'linux-yocto_git.bbappend' to 'linux-yocto-stable_git.bbappend'
in step 3 just before the code example. This makes the code consistent
with the rest of the example supporting the 2.6.34 kernel.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Step one states that the linux-yocto_git.bbappend file is left. This
file is associated with distro 2.6.37 kernel and the rest of the
example is associated with the 2.6.34 kernel. So, I changed the
step to indicate that the directory is left with a linux-yocto-stable_git.bbappend
file.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
These changes implemented Bruce Ashfield's next round of changes to the
section 4.3.3 example.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
In section 4.3.3 step 2 there was a directory 'build/donf/bblayers.conf'.
I fixed the typo to 'build/conf/bblayers.conf'.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The example used to show how to condense and merge two BSPs into a second
SCM used a non-existant machine (cav_ebt5800-standard). I replaced this
machine with 'common_pc_64-standard, which is a real machine.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
[BUGID# 597] - After talking with Bruce Ashfield the kernel documentation
needs to support the 2.6.34 disribution. So, the 'common-pc-standard'
strings need to be changed back to 'common_pc-standard'. This fix restores
them.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
[BUGID# 631] - I added a tip in the section where we show a sample build.
The tip says that you can add 'INHERIT += "rm_work"' to the local.conf file
to help conserve disk space during a build.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Discovered that the manual was not making correctly due to a stray
</literallayout> statement. I removed this statement and the manual
now builds.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
Depending on the architecture you are booting and the profile of the
filesystem image QEMU might come up in a new shell, and existing shell,
have a GUI, or be in command-line mode. I added a note indicating this
behavior.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The value for the 64-bit architecture was "x86-64" and not "x86_64".
Changed it to be correct.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The section that introduces the using a pre-built binary section needed
more items in the list. I added text for setting up the environment
and for starting QEMU.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The pre-built image section was one long section that naturally
broke into several areas. I inserted some sub-sections for better
organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added the exact architecture strings for each of the five supported
architectures as part of the /opt/poky/environment-setup.... commands
resulting from installing the toolchain tarballs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Revised the manual for better grammar and more technically accurate wordings.
Worked closely with Scott Garman on the revision.
Signed-off-by: Scott Rifenbark <scott@scott-desktop.(none)>
Added the packages autoconf and automake to both the Debeian-based
host and the RPM-based host example commands. During a fresh
development host system test run I found these packages were
necessary to develop Yocto projects using Eclipse IDE.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Made several small changes:
- Added a period to three-bullet list for consistency
- grammar fix to sentence
- Added clarification for getting stuff from qemu URL
- Fixed the forms for the image and the file system image
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Section 1.1 has the example filesystem layout. The last line of the
example filesystem layout had linux-wrs. It has been changed to
linux-yocto-stable.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I added a reference to the specific section in the kernel documentation
that describes how to create a BSP Based on an existing similar
BSP. The tools we have that create the PDF manuals from the DocBook
XML do not support cross-referencing to another PDF manual. So, I was
left with adding a clunky text-based reference to the section and a link
to the docs page on the web-site.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to indicate this directory as optional if the BSP had
special requirements for graphics support.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Found a mis-spelling that I corrected.
Also added wording to indicate this directory is optional.
Put in a note telling that defaults are set if a formfactor is
not found.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added wording to be sure user knows to replace "bsp" and "_bsp" in the
boilerplate template example with the actual BSP name (i.e. <bsp_name>).
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
It makes more sense to have the sections that describe the various
parts of the common structure as sub-sections to that. That pulls
out the click-through licensing into a higher-level section.
This is better overall section organization.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There are some sections now that don't correspond one-to-one with the
standard file structure presented in section 1.1. So I am commenting them
out for now. Since I am still in the process of iterating on this
manual I don't want to just delete the information.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added some text in section 1.1 explaining that the file structure example
is an example and that the file structure of specific BSPs could differ.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Lowered the "E" for the "meta-emenlow" BSP.
Removed the "oaktrail" one, which is an Intel code name and replaced
it with "beagleboard", which is a non-Intel board.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added information in the section about Pre-built User Binaries.
In the first paragraph I stated that this directory would contain
the Application Development Toolkit and minimal live images when the
BSP is "tarred" up and placed on the Yocto Project website.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Two lines had been earlier turned into a single sentence but the
capitalization of the second line still remained.
I switched "The" into "the".
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Inserted a note that states the BSP file structure shown is an example
only and that a given BSP could have different files.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Replaced meta-<bsp_name>/recipes-<bsp_name> with meta-<bsp_name>/recipes-bsp.
This conforms to how the BSP standard will be working.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Updated the figure to not use "preempt_rt". Now uses "preempt-rt".
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
1. Edited to incorporate new file system naming structure per Saul Wold. This
is the version I am sending him and Tom Z. to review.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Conflicts:
documentation/bsp-guide/bsp.xml
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a git checkout and git push command that did not have a newline
character between the two line in a literallayout block.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
removed the ";" character that was part of the git log --pretty=oneline
command example. This fixes bug [BUGID# 588].
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Comments covered some minor points. We did remove the "Creating
a Transition Kernel Layer" section however.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Cyril submitted a patch via email form for several spelling corrections. The master docs, however, are not up-to-date with what I have on my contrib area. Many of Cyril's corrections were already addressed. A few were not and I have updated them here with this commit.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There is inconsistent use of how BitBake is spelled. Sometimes it uses no capitalization, just a leading "B", or "BitBake". I looked at the BitBake manual and it seems that "BitBake" is the correct way to refer to it.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I pulled the openembedded mailing list information and provided information for yocto@yoctoproject.org, yocto-announce@yoctoproject.org, and poky@yoctoproject.org. I also updated the IRC section to include both #poky and #yocto channels.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
This version represents the completed first draft with all of Bruce Ashfield's comments applied and a good scrubbing of the text.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Re-writing up to the "Export for External (Upstream) Submission" section.
I am cleaning up the English and style.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Feedback indicated by Dave suggested getting rid of this. So I commented out the text around it and modified the reminder text so it did not reference a figure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The make process for the kernel book now includes multiple chapters instead of a single chapter.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
This is inline with how the other docs are built. kernel-manual.xml
is called by xsltproc from the Makefile.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I made this file similar to the bsp.xml file so that it would build into
a PDF file. It was throwing an error because of the imagedata tag
that was up front.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Code now calls a new file called kernel-manual.xml that in turn
includes the yocto-project-kernel-manual.xml file. This is in line
with how the other docs are built.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
this section is based on an email that Bruce Ashfield sent me. It replaces
what was in there in the form of sub-sections for creating a new BSP,
cloning one and bsp bootstrapping.
I needed more demarcation for these section titles. They were not visually
different enough.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
These sections were commented out after a review by Bruce Ashfield. They
need to be revisited as we continue with the 1.0 work.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I had to rename these files because I had kernel mis-spelled when I committed
the original manual files.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I noticed I had mis-spelled kernel for these files names after committing
the new kernel manual. I renamed the files and had to remove these two.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
This is the first draft of the Yocto Project Kernel manual. The
manual consists of two sections: concepts and a practical section that
has examples. It is based of Bruce Ashfield's kernel theory paper.
This first draft has been re-written and organized through the
concepts section. The remainder was just placed in as-is due to
time constraints for getting some kernel documentation up on the website.
The manual still needs scrubbing and organization in the latter half.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added an entry in the glossary for INC_PR. Also updated section
"Package Revision Incrementing" to mention the use of INC_PR in conjuntion
with the PR and PV variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I am using "xxxxxx" task as the way to call out a specific task in the
text. Previously a mix of <function>xxxxxx</function> and the "xxxxxx"
methods were being used.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because I am single-sourcing the bsp.xml file that is used both as
chapter 4 in the Poky Reference Manual and as the singe file in the BSP
Guide I removed the bsp.xml file that was local to the poky-ref-manual
folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created wording in the second paragraph of this file so that it can
fit both the context of the BSP Guide and the BSP chapter of the
Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because BSP chapter (bsp.xml) is identical to the single file used
in the BSP Guide (also bsp.xml but in the bsp-guide folder) I have decided
to change where the Poky Reference Manual get the bsp.xml file. This commit
causes it to get the file from the bsp-guide folder instead of an identical
but separate bsp.xml file local to the poky-ref-manual folder.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a mis-matched list element in an ordered list near the end
of the chapter. I had an <orderedlist> tag matched with an </itemizedlist>
tag preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a errant tag mis-match where I had used <orderedlist> and
ended it with </itemizedlist>. This was preventing the make.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
After moving BSP Guide into its own folder for documentation I discovered
a consequence of that. There are two separate bsp.xml files now: one
in the poky-ref-manual folder and one in the bsp folder. I had done some
good cleanup work in the version in the poky-ref-manual folder. This
commit reflects a 'meld' operation where I re-sync'ed the bsp.xml
file in the bsp-guide folder to be the same (almost) as the one in the
poky-ref-manual folder. There is still one slight difference between the
two files due to one's context as a stand-alone manual and the other as
a section in a larger book.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command in the Makefile now uses the XSL Customization
layer style sheet poky-ref-manual-customization.xsl for the style
sheet parameter. This method will allow for customization of the
HTML version formatting that might be unique for the manual. I have
added the new file to the file structure.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The xsltproc command now uses the XSL Customization layer style sheet
poky-ref-manual-customization.xsl for the style sheet parameter. This
method will allow for customization of the HTML version formatting that
might be unique for the manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I moved the XSLTOPTS variables to the top of the file so they will
be defined first. This is an attempt to fix the seemingly random
HTML runtime errors I am getting during the 'make html' command.
It seems to be consistently working now.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
In the Ref Images appendix there was a link to the section
"External Development Using the Poky SDK" section that did not work
due to the section id string changing. I fixed the link.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The Extending Poky chapter was referencing a non-existent BBFILE_COLLECTIONS
glossary term. I added the term.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added an entry for BBLAYERS in the ref-variables (glossary) appendix.
The Extending Poky chapter was referencing this variable and it did not
exist.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed a couple of redundant </ulink> tags.
Also indented the literallayout text by five spaces for formatting.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I found another redundant </ulink> tag.
I removed the word sections from within a section link in a couple of places.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added a section id to the 'welcom to poky' section that was missing.
Removed a redundant </ulink> tag that was not needed.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Because I created the file 'bsp-guide-customization.xsl' to try and eliminate odd
HTML runtime errors and to allow for customized XSL layer of formatting, it was necessary to
update the Makefile to call the new file as the XSL style sheet.
The Yocto Project Quickstart uses this technique and has no HTML build
problems.
HTML build errors seem to be eliminated so far.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Since the BSP Guide is under its own cover I thought it would be good
to have its title page not have the Poky Handbook PNG image. I created
this BSP image for use with the stand-alone BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created the file 'bsp-guide-customization.xsl' to try and eliminate odd
HTML runtime errors and to allow for customized XSL layer of formatting.
The Yocto Project Quickstart uses this technique and has no HTML build
problems.
HTML build errors seem to be eliminated so far.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I am getting occasional errors while attempting to make the HTML version
of this manual. The error is generated from line 367 of the html.xsl
style sheet and seems to come from confusion of not finding the css
style sheet parameter. Here is the error from the shell window.
scottrif@scottrif-desktop:~/poky/documentation/bsp-guide$ make html
xsltproc --stringparam html.stylesheet style.css --stringparam chapter.autolabel 1 --stringparam section.autolabel 1 --stringparam section.label.includes.component.label 1 --xinclude -o bsp-guide.html http://docbook.sourceforge.net/release/xsl/current/xhtml/docbook.xsl bsp-guide.xml
Note: namesp. cut : stripped namespace before processing
WARNING: cannot add @xml:base to node set root element. Relative paths may not work.
Note: namesp. cut : processing stripped document
runtime error: file http://docbook.sourceforge.net/release/xsl/current/xhtml/html.xsl line 367 element choose
Variable 'generate.css.header' has not been declared.
make: *** [html] Error 10
The odd think is that running "make html" immediately again could cause the
make to be entirely successful.
So this commit involved moving the XSLTOPTS parameters to the top of the
make file and the *_URI parameter declarations to the top as well. This
takes them out of the "pdf" area of the make file and they should be
more universal. The reason I tried this is because I have no such issues
when building the yocto-project-qs HTML file.
However, even with these changes the occasional runtime error (shown above)
still occurs.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. So for the background-image url in the .authorgroup
style I replaced the poky-ref-manual.png file with bsp-title.png.
Updates affect both the PDF and HTLM versions of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. Updates affect both the PDF and HTLM versions
of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Since this manual is about BSP and not Poky as is the Poky Reference
Manual I updated the title page to include the title combined with the
Yocto Project logo. Updates affect both the PDF and HTLM versions
of the BSP Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I created a new sub folder to hold the BSP Guide by itself so there are
three folders now for each of the Yocto manuals: BSP Guide, quick start
and poky ref manual. The new folder for the BSP guide is 'bsp-guide'.
It contains the bsp.xml file, its own Makefile, a bsp-guide.xml file,
and its own 'Figures' directory. The 'bsp-guide.xml' file that was
in the poky reference folder was deleted.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I completed general edits to the second chapter of the poky reference
manual. These edits went from section 2.4.5 through the end of the
chapter. They consist of text rewrites for more active voice and follow
general technical writing principles.
I completed the same types of edits in the third chapter of the manual
from the beginning through section 3.3.2.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Extensive language and consistency edits being applied to the manual.
During the 0.9 push I did not have time to make a pass through the
document.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Changed "source poky-4.0/poky-init-build-env poky-4.0-build"
to be "source poky-laverne-4.0/poky-init-build-env poky-4.0-build"
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
There was a grammatical error in the title and redundancy in the
first sentence of this section. Cleaned up the title and wording.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I did a complete edit pass through this chapter. The manual has
not been fully edited from its original state. One critical technical
correction was corrected where the green-3.3 release was referenced.
I changed this to laverne 4.0.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I changed the figure that goes along with building an image based on
Kevin's input. Also, removed several URLs that had 'yoctolinux' in them
along with a 'tar' command example with the same string. LF does
not want these in there.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Removed several blocks of text from section 5.1.2.1.1
"Installing and Setting up the Eclipse IDE". This text according
to Jessica was no longer needed.
Corrected a typo listing the package libsdl1.2-dev as libsdll.2-dev.
Also added the package mercurial.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added commands to support package installation of RPM-based host systems
to the example. Input based on feedback from Dirk.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I have inserted the Poky image in the front matter again because the
book is a Poky Guide.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The image file was in the same directory as the main reference manual
files. So I moved the file into subdirectory "Figures" with other
figures.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
I could not get the Yocto Project logo to appear correctly in the book
after the title. I also decided that since Poky is by no means
going away that this book should have that image associated with it
as it is the Poky Reference Manual.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
When scaled to fit the page the picture had a black vertical line
artifact to the right. I snipped out the image a little tigher to
eliminate this line.
I also incorporated Dirk's comments tightening up the sequence of
example commands to do the build. I incorporated Fedora 14 note
and addition of the BB_NUMBER_THREADS and PARALLEL_MAKE variables.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The link to openembedded was used to reference Linux distributions supporting
Yocto Project. The link has been removed and replaced with more generic
text so as to not have to link to openembedded. Text used is
"A Host system running a supported Linux distribution (i.e. recent releases
of Fedora, OpenSUSE, Debian, and Ubuntu)."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The example commands that build an image were updated to reflect the
real 4.0 release. I updated the paragraph after the example commands
to refer to the new release used in the command examples.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
1) Wording change based on Darren's input of making Linux kernel sound like the only open source part of YL
2) Removal of the "v" option for the tar command example.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
1. Added Richard Purdie's general editing feedback to the "Welcome" and
"Introducing the Yocto Project Development Environment" sections.
2. Added Kevin Tian's feedback: 1) changed "Sudo" to "sudo", 2) reversed
the order of the sample "cd" and "source" commands since the "source" command
builds the directory structure first so changing to the directory before running
"source" made no sense, 3) removed the "bitbake qemu-native" command.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Feedback from Kevin Tian suggested that the outer box be labeled "QEMU" rather
than "Target." Also that the two inner boxes be "Set of Emulated Devices" and
"Target CPU." Final change was the use of "Yocto Project Scripts" rather than
"Yocto Linux Scripts."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Feedback from Kevin Tian suggested "OPKG" should be lower-case.
Also, use of "zypper" instead of "YUM." I also lower-cased
"apt-get."
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
The "Using OprofileUI" section had a description of how to use a
pre-built UI and how to download and build one. Feedback from Jessica
Zhang suggested removing the instruction for using a pre-built UI.
All that remains in the first paragraph now is instruction on how
to download and build the UI.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Added section 5.1.2.2 "The Anjuta Plug-in" into the Poky Reference Manual.
This section consists of sub-sections 5.1.2.2.1 "Setting Up the Anjuta
Plug-in", 5.1.2.2.2 "Configuring the Anjuta Plug-in", and 5.1.2.2.3 "Using
the Anjuta Plug-in". This information was in the original Poky Handbook
but had been removed by me since I thought it was not going to be supported
for the 0.9 Yocto Release. It has now been restored with a note indicating
that Anjuta will not be supported post 0.9 release.
I did some general text editing in each section for readability.
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
It's no longer neccesarry to define THISDIR and FILESPATH in each bbappend
recipe. Should you need to reference extra files you should use FILESEXTRAPATHS
Signed-off-by: Joshua Lock <josh@linux.intel.com>