Harald Welte
6edd534be4
OWHW: Update linux (phy address fix in dt; dummy.ko with mdio bus support)
2016-06-23 00:42:15 +02:00
Harald Welte
07f72f2614
OWHW: update linux kernel for v2 (gpio-cs/omap2-spi, etc.)
2016-06-23 00:42:15 +02:00
Harald Welte
82671cda21
OWHW: build new linux kernel version with dts for v2
2016-06-23 00:42:15 +02:00
Harald Welte
e402b3e564
OWHW: Update defconfig with requirements for v2 hardware
2016-06-23 00:42:15 +02:00
Harald Welte
59185c8de3
OWHW: update to git version with 10kHz I2C bus speed
2016-06-23 00:42:15 +02:00
Harald Welte
37cd96f46b
OWHW defconfig: No MMC, no PPS, add I2C and MDIO bit-banging
2016-06-23 00:42:15 +02:00
Harald Welte
f525b5cf6b
OWHW: fix build of linux-sysmocom uImage LOADADDR
2016-06-23 00:42:15 +02:00
Harald Welte
e1dd22818d
rauc: support OWHW
2016-06-23 00:42:15 +02:00
Harald Welte
6e802da190
OWHW: Add kernel recipe
2016-06-23 00:42:15 +02:00
Holger Hans Peter Freyther
afc1035dc2
linux-sysmocom: Re-enable the standard usb modules
...
Enable the xt-log kernel module and build the wifi drivers
as modules again. We don't need the backports right now.
2016-06-23 00:42:15 +02:00
Jan Luebbe
3d51210f9b
linux-sysmocom: switch all systems to 4.1.4
...
[hfreyther: Create a new file for 4.1]
Signed-off-by: Jan Luebbe <jluebbe@debian.org>
2016-06-23 00:42:15 +02:00
Harald Welte
2025596913
OWHW: update barebox for SWITCH_RESET pulse generation on cold boot
2016-06-23 00:41:43 +02:00
Harald Welte
b021331415
OWHW: Enable hardware watchdog from systemd
...
We had this enabled on odu/idu/sysmobts already, but didn't do so
on owhw.
2016-06-23 00:41:38 +02:00
Harald Welte
78f5bc0867
OWHW: add image definitio for OWHW related files + rauc-slot files
...
for OWHW, one should build sysmocom-owhw-rauc-image, not
sysmocom-owhw-image!
2016-06-23 00:41:33 +02:00
Harald Welte
27d5493687
OWHW: update barebox recipe (move eeprom bootstate to offset 0)
2016-06-23 00:41:31 +02:00
Harald Welte
f54c291c85
OWHW: add patch to hard-code the boot-state back-end EEPROM path
2016-06-23 00:41:18 +02:00
Harald Welte
4a8db6dbea
update barebox-state to current dt-utils master
...
which (at least for owhw-v2) fixes the automatic discovery of the
bootstate backend EEPROM. I suspect it should now also work without
the hardc-de-layout-values.patch on sysmobts-v2 and sysmocom-odu, but
that remains to be tested (and thus the patches remain).
2016-06-23 00:41:12 +02:00
Harald Welte
6eef6d8fb3
OWHW: update barebox to include v2 changes
2016-06-23 00:41:06 +02:00
Harald Welte
b53807060b
sysmocom-owhw-image: no initramfs, hard-link for kernel
...
for some reason barebox is not able to resolve the symlink, so let's
create a hard link instead.
2016-06-23 00:40:50 +02:00
Harald Welte
08406f0a8c
barebox: update to 'initramfs is optional' boot config
2016-06-23 00:40:45 +02:00
Harald Welte
b917d5b19a
task-owhw-image: Add crda and iw for wifi
2016-06-23 00:40:38 +02:00
Harald Welte
d5c8bcd3b7
add crda (wifi regulatory database) and its [build] dependencies
2016-06-23 00:40:34 +02:00
Harald Welte
843770cb60
import iw 3.11 recipe from meta-openembedded dora branch.
...
I completley fail to understand why the most fundamental tool for wifi
configuration is missing from poky/dora.
2016-06-23 00:40:32 +02:00
Harald Welte
b45f8f591f
bossa: add missing readline build dependency
2016-06-23 00:40:20 +02:00
Harald Welte
5bf8ff5571
OWHW: add 'sysmocom-owhw-image' and ensure usb2514 + bossa is included
2016-06-23 00:40:16 +02:00
Harald Welte
aa5249a22d
OWHW: add recipe for bossa (Atmel SAM flasher)
2016-06-23 00:40:10 +02:00
Harald Welte
87ba2df810
OWHW: update barebox to fix button GPIO
2016-06-23 00:40:01 +02:00
Harald Welte
5c4b0827e6
OWHW: fix gpio_usb2514 syntax error
2016-06-23 00:39:23 +02:00
Harald Welte
3bacf883bd
OWHW: persistent modem serial device names
2016-06-23 00:39:20 +02:00
Harald Welte
8cde214b95
rauc: support OWHW
2016-06-23 00:39:11 +02:00
Harald Welte
fe3fe6e3d3
OWHW: add GPIO export script for this board
...
... and use the new GPIO location from usb2514 tool
2016-06-23 00:39:06 +02:00
Harald Welte
a224a88891
usb2514.c: Add support for GSMK OWHW board
...
we only need to swap a single port (DN4) here.
2016-06-23 00:39:02 +02:00
Harald Welte
89435bf483
usb2514: make it more modular/configurable
2016-06-23 00:38:58 +02:00
Harald Welte
1c6616736c
OWHW: Add barebox recipe
2016-06-23 00:38:44 +02:00
Holger Hans Peter Freyther
ddb2f88230
u-boot: Build newer version of U-Boot not touching A1CR
...
UBL is setting up the flash timings (A1CR) and so far U-Boot
was overwriting it with a timing for the EVB development board
of TI. Let UBL define ECC/ChipSelect and the A1CR timings.
This might now cause different kind of flash issues because the
per chip timings might be "wrong". This is why this commit should
needs to stay in testing a bit longer. We should use this commit
on RevC, D, E and F hardware ourselves a bit.
2016-06-12 21:47:34 +02:00
Holger Hans Peter Freyther
a09e6a2fec
barebox-sysmobts: Prepare the system for revisionG as well
2016-06-06 14:36:43 +02:00
Holger Hans Peter Freyther
86baca7ed8
u-boot: Add revision G and later support as well
2016-06-06 14:27:54 +02:00
Holger Hans Peter Freyther
0673324a5d
ubl: Add reivision G and later support
...
The nWP handling was only present for RevF but applies to later
HW revisions too.
2016-06-06 14:23:31 +02:00
Holger Hans Peter Freyther
bce73d1dc7
image-rauc-ubi: Deal with different kernel types
...
I might end up using a zImage and then it should be used. Use the
variable exported by the ${MACHINE}.conf to work with it.
2016-06-02 18:08:38 +02:00
Holger Hans Peter Freyther
2ed575b506
uboot: Avoid QA error on packaging
...
I didn't know that u-boot was creating a package and installing
the bin into /boot. The detection of the file seems to have
changed and a new QA error comes up.
ERROR: u-boot-v2011.12+gitAUTOINC+f6453a3911-r0 do_package: QA Issue: split_and_strip_files: 'file /home/oebuilds/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/sysmobts_v2-poky-linux-gnueabi/u-boot/v2011.12+gitAUTOINC+f6453a3911-r0/package/boot/u-boot-sysmobts-v2-v2011.12+gitAUTOINC+f6453a3911-r0' failed [split-strip]
This seems to have been introduced by changing the LC_ALL to
en_US.UTF-8. I have started a dialogue with upstream development
but as we do not need a u-boot package, let's just remove the
files.
2016-05-24 14:39:29 +02:00
Holger Hans Peter Freyther
5bdf5bc9f9
image-rauc-ubi: Make sure mkfs.ubifs is present
...
The DEPENDS is not enough to have it ready in time. Add a task
dependency for mtd-utils-native.
2016-05-15 15:23:43 +02:00
Holger Hans Peter Freyther
719af51ad0
image-rauc-ubi: Add license file checksums
...
ERROR: image-rauc-ubi-1.0-r0 do_populate_lic: QA Issue: image-rauc-ubi: Recipe file does not have license file information (LIC_FILES_CHKSUM) [license-checksum]
2016-05-07 23:00:11 +02:00
Holger Hans Peter Freyther
90a5fad2b7
glib: Enable static libraries for glib
...
I want to use static libraries of glib in rauc to shrink the rescue
image to a reasonable amount.
2016-04-21 13:06:13 +02:00
Holger Hans Peter Freyther
a8b9551257
ca-cacert-rootcert: Add the letsencrypt certificate here as well
...
This is not quite "ca-cacert" anymore, more like "ca-sysmocom" for
the root certificates needed for us.
Fixes: SYS#2499
2016-04-09 18:25:03 +02:00
Holger Hans Peter Freyther
9460fb650f
glib-2.0: Move recipes to yocto-dora/
...
This glib-2.0 version was required by rauc and should have been
placed in the recipes-extra (or recipes-fixes) directory.
Yocto master has imported gobject-introspecition and this requires
a newer version of glib-2.0. For Yocto master this recipe has
replaced the newer one. By moving it to the yocto-dora directory
we continue to use the old version on dora and the default version
on master.
2016-03-23 13:53:56 +01:00
Holger Hans Peter Freyther
e6edea0cdb
layer: Allow to have entire recipes in the yocto-VER directory
...
In case of the upcoming glib-2.0 change we only want to use our
version on Dora. Look for *.bb in the yocto-dora/*/ as well.
2016-03-23 13:53:55 +01:00
Holger Hans Peter Freyther
f3ffbf4db3
task-sysmocom-feed: Add linux sctp library to the feed
...
libosmo-netif gained SCTP support and we should be able to provide
it.
Related: SYS#2524
2016-03-23 11:52:19 +01:00
Holger Hans Peter Freyther
73c143612a
yocto-master: Remove udev bbappend for the master build
...
In master we use systemd to provide udev and standalone udev has
been replaced with eudev. I think we do not need to patch things
around here.
2016-03-05 21:23:55 +01:00
Holger Hans Peter Freyther
b87c5b4a0c
ntp: Upgrade with security fixes in ntp
...
The upgrade is fixing several known security issues. Let's update it.
Fixes: SYS#2449
2016-02-27 17:09:51 +01:00
Holger Hans Peter Freyther
29ba452c5f
lmsensors-apps: The code vanished once again, move to fedora
2016-02-20 19:36:25 +01:00