The function is declared and defined as inline and gcc6 will not
emit an external visible symbol for it. Master doesn't have this
problem anymore so let's just patch it here.
Fixes:
| /usr/src/debug/osmo-bts/0.4.3+gitAUTOINC+57ee780789-r1a2ff06d20-r18.18/git/tests/sysmobts/sysmobts_test.c:207: undefined reference to `l1if_ms_pwr_ctrl'
UBL is setting up the flash timings (A1CR) and so far U-Boot
was overwriting it with a timing for the EVB development board
of TI. Let UBL define ECC/ChipSelect and the A1CR timings.
This might now cause different kind of flash issues because the
per chip timings might be "wrong". This is why this commit should
needs to stay in testing a bit longer. We should use this commit
on RevC, D, E and F hardware ourselves a bit.
I didn't know that u-boot was creating a package and installing
the bin into /boot. The detection of the file seems to have
changed and a new QA error comes up.
ERROR: u-boot-v2011.12+gitAUTOINC+f6453a3911-r0 do_package: QA Issue: split_and_strip_files: 'file /home/oebuilds/jenkins/workspace/Yocto-Master/label/OE/build/tmp/work/sysmobts_v2-poky-linux-gnueabi/u-boot/v2011.12+gitAUTOINC+f6453a3911-r0/package/boot/u-boot-sysmobts-v2-v2011.12+gitAUTOINC+f6453a3911-r0' failed [split-strip]
This seems to have been introduced by changing the LC_ALL to
en_US.UTF-8. I have started a dialogue with upstream development
but as we do not need a u-boot package, let's just remove the
files.
The builds of the stable upgrade and the Yocto-Master failed
because of the commit gone missing (no remote is referencing
it). I created a dummy branch to hold this commit.
I think the last device we sold was in 2011 and I am not aware
if anyone has used it for the last couple of years. Remove it
to lower the complexity of the builds.
In yocto versions before dizzy/master the build was done
in the source directory and when configure was executed
twice in the same directory we would have a build failure
due the symlink already existing. Simply assume that if
the ln fails the link is already there.
Out of disk space situations are handled more early by
OE and missing files will be found by configure.
In dizzy/master OE will clean the build directory before
calling configure so the issue does not apply there.
Fixes: SYS#1170
The name of the config file was changed and so far
I was hesitant to upgrade the MLO. I think the change
in EEPROM applies to the MLO as well so we should
upgrade it. It has neither been build tested nor tested
on a device.
Now reading the command it should probably be add.nwp or
rem.wp but so is life. We can add an alias for add.nwp in a
future version. The boot, recovery and fwup command have been
changed to issue nand rem.nwp before touching the flash.
The sysmobts-mgr is now linking to libgps. This means we need to
DEPEND on gpsd to have this library available. The tracking build
for both dora and master is broken due this.
One might need to erase the environment but with a default
environment barebox will now send a LLDP during boot up. This
way we can see if a device is on a local link or not.
Fixes: SYS#488