u-boot/drivers/mtd/nand/mxc_nand.h

210 lines
5.6 KiB
C
Raw Normal View History

/*
* (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __MXC_NAND_H
#define __MXC_NAND_H
/*
* Register map and bit definitions for the Freescale NAND Flash Controller
* present in various i.MX devices.
*
* MX31 and MX27 have version 1, which has:
* 4 512-byte main buffers and
* 4 16-byte spare buffers
* to support up to 2K byte pagesize nand.
* Reading or writing a 2K page requires 4 FDI/FDO cycles.
*
* MX25 and MX35 have version 2.1, and MX51 and MX53 have version 3.2, which
* have:
* 8 512-byte main buffers and
* 8 64-byte spare buffers
* to support up to 4K byte pagesize nand.
* Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
* Also some of registers are moved and/or changed meaning as seen below.
*/
#if defined(CONFIG_MX27) || defined(CONFIG_MX31)
#define MXC_NFC_V1
#define is_mxc_nfc_1() 1
#define is_mxc_nfc_21() 0
#define is_mxc_nfc_32() 0
#elif defined(CONFIG_MX25) || defined(CONFIG_MX35)
#define MXC_NFC_V2_1
#define is_mxc_nfc_1() 0
#define is_mxc_nfc_21() 1
#define is_mxc_nfc_32() 0
#elif defined(CONFIG_MX51) || defined(CONFIG_MX53)
#define MXC_NFC_V3
#define MXC_NFC_V3_2
#define is_mxc_nfc_1() 0
#define is_mxc_nfc_21() 0
#define is_mxc_nfc_32() 1
#else
#error "MXC NFC implementation not supported"
#endif
#define is_mxc_nfc_3() is_mxc_nfc_32()
#if defined(MXC_NFC_V1)
#define NAND_MXC_NR_BUFS 4
#define NAND_MXC_SPARE_BUF_SIZE 16
#define NAND_MXC_REG_OFFSET 0xe00
#define NAND_MXC_2K_MULTI_CYCLE
#elif defined(MXC_NFC_V2_1) || defined(MXC_NFC_V3_2)
#define NAND_MXC_NR_BUFS 8
#define NAND_MXC_SPARE_BUF_SIZE 64
#define NAND_MXC_REG_OFFSET 0x1e00
#endif
struct mxc_nand_regs {
u8 main_area[NAND_MXC_NR_BUFS][0x200];
u8 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
/*
* reserved size is offset of nfc registers
* minus total main and spare sizes
*/
u8 reserved1[NAND_MXC_REG_OFFSET
- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
#if defined(MXC_NFC_V1)
u16 buf_size;
u16 reserved2;
u16 buf_addr;
u16 flash_addr;
u16 flash_cmd;
u16 config;
u16 ecc_status_result;
u16 rsltmain_area;
u16 rsltspare_area;
u16 wrprot;
u16 unlockstart_blkaddr;
u16 unlockend_blkaddr;
u16 nf_wrprst;
u16 config1;
u16 config2;
#elif defined(MXC_NFC_V2_1)
u16 reserved2[2];
u16 buf_addr;
u16 flash_addr;
u16 flash_cmd;
u16 config;
u32 ecc_status_result;
u16 spare_area_size;
u16 wrprot;
u16 reserved3[2];
u16 nf_wrprst;
u16 config1;
u16 config2;
u16 reserved4;
u16 unlockstart_blkaddr;
u16 unlockend_blkaddr;
u16 unlockstart_blkaddr1;
u16 unlockend_blkaddr1;
u16 unlockstart_blkaddr2;
u16 unlockend_blkaddr2;
u16 unlockstart_blkaddr3;
u16 unlockend_blkaddr3;
#elif defined(MXC_NFC_V3_2)
u32 flash_cmd;
u32 flash_addr[12];
u32 config1;
u32 ecc_status_result;
u32 status_sum;
u32 launch;
#endif
};
#ifdef MXC_NFC_V3_2
struct mxc_nand_ip_regs {
u32 wrprot;
u32 wrprot_unlock_blkaddr[8];
u32 config2;
u32 config3;
u32 ipc;
u32 err_addr;
u32 delay_line;
};
#endif
/* Set FCMD to 1, rest to 0 for Command operation */
#define NFC_CMD 0x1
/* Set FADD to 1, rest to 0 for Address operation */
#define NFC_ADDR 0x2
/* Set FDI to 1, rest to 0 for Input operation */
#define NFC_INPUT 0x4
/* Set FDO to 001, rest to 0 for Data Output operation */
#define NFC_OUTPUT 0x8
/* Set FDO to 010, rest to 0 for Read ID operation */
#define NFC_ID 0x10
/* Set FDO to 100, rest to 0 for Read Status operation */
#define NFC_STATUS 0x20
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
#define NFC_CONFIG1_SP_EN (1 << 2)
#define NFC_CONFIG1_RST (1 << 6)
#define NFC_CONFIG1_CE (1 << 7)
#elif defined(MXC_NFC_V3_2)
#define NFC_CONFIG1_SP_EN (1 << 0)
#define NFC_CONFIG1_CE (1 << 1)
#define NFC_CONFIG1_RST (1 << 2)
#endif
#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
#define NFC_V2_CONFIG1_FP_INT (1 << 11)
#define NFC_V3_CONFIG1_RBA_MASK (0x7 << 4)
#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7) << 4)
#define NFC_V1_V2_CONFIG2_INT (1 << 15)
#define NFC_V3_CONFIG2_PS_MASK (0x3 << 0)
#define NFC_V3_CONFIG2_PS_512 (0 << 0)
#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
#define NFC_V3_CONFIG2_NUM_ADDR_PH0 (1 << 5)
#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
#define NFC_V3_CONFIG2_PPB_MASK (0x3 << 7)
#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7)
#define NFC_V3_CONFIG2_EDC_MASK (0x7 << 9)
#define NFC_V3_CONFIG2_EDC(x) (((x) & 0x7) << 9)
#define NFC_V3_CONFIG2_NUM_ADDR_PH1(x) (((x) & 0x3) << 12)
#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
#define NFC_V3_CONFIG2_SPAS_MASK (0xff << 16)
#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
#define NFC_V3_CONFIG2_ST_CMD_MASK (0xff << 24)
#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
#define NFC_V3_CONFIG3_FW8 (1 << 3)
#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
#define NFC_V3_CONFIG3_NUM_OF_DEVS(x) (((x) & 0x7) << 12)
#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
#define NFC_V3_WRPROT_UNLOCK (1 << 2)
#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
#define NFC_V3_IPC_CREQ (1 << 0)
#define NFC_V3_IPC_INT (1 << 31)
#if defined(MXC_NFC_V1) || defined(MXC_NFC_V2_1)
#define operation config2
#define readnfc readw
#define writenfc writew
#elif defined(MXC_NFC_V3_2)
#define operation launch
#define readnfc readl
#define writenfc writel
#endif
#endif /* __MXC_NAND_H */